When I set up the menu display options on my new 2016 Prius 4 Touring, I remember an option for prompts: something like beginner/advanced. Now I can't find it anywhere. Also, does the 2016 Prius 4 Touring have the same wiper blade size as the older models?
My 2013 Prius 3 had 26" driver, 19" passenger,l 16" rear.
Any technical difference between turning the ECO diplay "on" or "off" when setting display options? I know when "off", the ECO sign does not show but does it also mean the car runs differently? Is this just a way to avoid having that thing show up?
View 10 RepliesI can't find the average mpg display anywhere. On my 2008 I could hit the info button and it would display your average mpg but on my 2013 Prius 3 there is no reading for that, at least I can't find it.
In the owners manual there is a pic of one of the display's that has it in there, but I can't seem to find that display anywhere.
I have a 2012 PiP Base. Wondering if there is a post for this. Is it worth it? Will it work? Better light output? Less battery usage? etc?
View 19 RepliesI cannot find compass on my display? IS this normal for S model? I saw some people use a gps sensor on back door to lure signal into the audio consol. Don't remember exactly. Can I replace mine with a luxury VW Navigation GPS OEM RNS-315 Touch Screen Radio? Try this? Or the compass idea into current basic radio module?
View 1 RepliesToyota gave me to much time and now I changed my mind. I was set on getting the basic model but hearing so many good things about the advanced model I would like an advanced now. My dealer doesn't think it is possible to switch out my basic for an orphaned advanced model. My basic should be at the dealer any day now.
View 8 RepliesMy wife and I recently purchased a 2014 prius c 4 here in Alberta. We have quickly realized that there is no remote starter option. How does one warm there car up and keep the doors locked on a smartkey system? Not comfortable leaving a car running unlocked. Vehicle is parked outside with plugin.
View 19 RepliesJust exploring on my touch screen, while under Setup and then under Vehicle you have the DRL option of {on or off }. But I don't see any difference with I select either one. Even if I switch on my DRL or headlights I see no change when I select on or off. What does it change?? I'm also not finding an answer in the owners manual. On my headlight switch I have these options... Off - DRL - Parking lights - Head lights> All my other Prius friends have an auto headlight that I somehow missed out on ....
View 7 RepliesMy 99 250 XL only has heat, and the blowthru vent air which in Florida, might as well be heat also. LOL.
Since the vents and everything is there, what all and how hard would It be? I have an extra dash control that I can put since mine doesn't have the ac option on it
My dome light won't illuminate when I open any door. I converted the dome light, courtesy lights and map lights to LED's about a year ago. I reinstalled the original bulb in the dome fixture to see if that would clear it up. Same thing. I can get the light to work if I switch it to "always on". I checked to make sure the dimmer switch on the dash was turned on, and it is. Any guesses?
View 9 RepliesI recently picked up my first Gen III after having traded in my Gen II. I'm certainly happier about a lot of things, but do miss a few things too. One being the option to turn air recirculation on when using the windshield defogger.
View 3 Replies I have a 2014 ford F350. Was flood damages, all fixed and running great except a couple of small problems. One is the volume is restricted to 49%.
Supposedly you can turn off mykey in settings with admin key inserted. I have 3 keys, tried them all no my key option.
I have IDS so erased all keys, reprogrammed them, still no mykey option. I read that all newly programmed keys are admin by default, is that correct? if so, how to fix this?
I also have a cloned key programmer, tried that erased all keys, made new ones, still no mykey option in cluster settings. its a new cluster from ford, programmed on installation.
Finally received my Prius 4 a few days ago.. I cannot find the way to get the power mode curve to display on the screen. How to do this? I have been able to get the curve on the HUD but not on the screen next to the speedometer. I do get a bar indicator showing the modes stacked up inside the bar but no curve display.
View 3 RepliesAside from spending $ to have the polarity reversed on the HVAC display, is there anything be done to darken the display letters and numerals? In the daylight this thing is unreadable. Very poor design by Toyota. Any little tricks that I don't know about?
View 4 RepliesNot the usual. I stopped on my way home to get gas tonight when the gauge was showing one pip. Naturally it wasn't low, but I'm used to that.
The odd thing is that after I got in the car and turned it back on the gauge stayed at one pip and the fuel display on the multi-function display didn't reset.
I dropped off my R almost 10 days ago due to a check engine light and was told my timing is advanced at idle. So they replaced both timing chains and the timing tensioner. What could have caused the timing advance?
Engine is stock and always use 91octane ...
I added air to my tires today and wanted to reset the TPMS, the manual stated that the button to hold for a few seconds is located on the lower Left side of the dash below the fuel door release button area. I searched far and wide and am unable to find any button?
Where this button is or how to reset the system.
2005 GTI 1.8t Engine ... I changed my timing belt water pump and tensioner yesterday and today I am receiving an engine code: P0011 Intake (A) Camshaft Position Timing - Over Advanced (Bank 1) My friend timed the engine and knew that is was 1 tooth advanced. He told me that is was going to be OK because 1.8t's have a 1 tooth tolerance. I would have redone it but I did not know how. What to do in this situation? Do I need to re time the engine?
View 2 RepliesI just bought a 2000 F250 5.4 gas. I have some minor issues that I will be trying to fix. This is my first full size truck and I bought it to pull a trailer once in a while. How can I find the axle ratio for this specific truck? Is it written on the truck somewhere?
View 11 RepliesI can't find canister pressure valve hose. It looks cut from the pressure valve in some way. Tried following it from gas tank but I've lost it through the chassis.
View 4 RepliesI had a new engine put into my 2006 F350 SD 5.4 last year and ever since then I can't keep the freon charged in my ac. The mechanic said all he did was lay the compressor out of the way and didn't disconnect anything ac related. I have 2 different shops keep my truck for a couple days and neither could find a leak. Yet a month later, freon is low. I think I have more dye in my system than freon.
I put 2 of those ac leak sealers, the ones you have to ask for behind the counter and can keep my ac working for maybe 45 days, then throw 3 cans in it. No dye is showing up nor will the sniffer find anything. I hate to go to the dealer because I figure they will want to replace everything. Any tips other than try another shop and maybe they can find the leak.