Will I wear out the transmission using the engine brake to slow down faster when coming to a stop at a stop sign or light, then shifting back into D when taking off? Should I just always leave it in D unless I am driving down a steep hill?
View 12 RepliesSo this morning on my way to work its pouring. Drive 30 min and while slowing down at the last stop sign the car stalls. Car wont start anymore. Not even trying to turnover. Damn TB must have snapped.
So I ended up pushing the car into my works parking lot. Luckily rain stopped by lunch time. I popped open the driver side TB cover just enough to see if the belt. The belt did not seem to have snapped. I was able to push down on it with some force. There was definitely tension on it. So I ask my buddy to try and start it. I could see the belt turning. Tried a second time to start and this time I would even hear the starter. all it would do is a clicking sound.
Is it possible the belt is really broken? I'm now thinking it might have jumped a tooth or something and now all my valves are bent. Car has 140k km. Previous owner said it was changed but could not provide any proof. I guess my question: is there anything else that would cause TB Failure symptoms. I mean the car stalled out. How could it not be the TB...
We have a 2012 Santa Fe Limited V6 AWD. Currently it has 17,400 miles on it. It's my wife's daily driver and has been a great vehicle. Last week while she was coming out of Target and slowing down for a stop sign she felt a "shudder" as it downshifted from 2nd to 1st. Then as she was coming up to a stop light it did it again. So, she came home and told me about it.
On the highway coming home she said it was perfectly fine but stopping at the stop sign on the off ramp it did the shudder. And so I took it out for a test drive to go get the mail. I noticed that it would shudder on the 3-2 and 2-1 downshifts. On the up-shifts it was perfectly fine. Then, I noticed as I was rolling forward at about 1-2 mph waiting for someone to cross the street the car was rolling like one of it's wheels or axles was bent. Any faster than that and you can't feel it and again at highway speeds you can't feel it at all. It's glass smooth.
Soooo, we bring it in to the dealer and they say we bent the front drivers side axle shaft. WHAT!? How in the world would we have bent that? They said we probably hit a big pot hole but it's under warranty and that they will have to order the part and to bring it back the next week. We drive it for another week and the shudder is getting worse and at this point I'm pretty sure the trans is toast. But still, on the highway it's perfectly fine.
We bring it back in to have the axle shaft replaced and they say it will be about 2 hours. And so we go on our merry way trying to kill some time. About 1.5 hours later we get a call asking us to come back in because they need to get us a loaner.
Apparently as the tech was trying to spin the drive-shaft to line up the splines in the trans with the axle shaft he couldn't turn the drive shaft even though it was in neutral. There was a spot in the rotation of the transmission and drive-shaft where it would spin freely like it should and then it would hit that spot and was almost "un-turnable". They think that is what bent the axle shaft.
So, they are going to tear apart the transmission and transfer case to find out what the problem is but most likely going to have to end up replacing one of them anyway.
So about 3 days ago I made a long 9 hour drive. No problems at all but I did allow my fuel to get a little lower then I normally do. About eighth a tank had 30 miles left on the digital read out. Stopped and filled up at loves where I always get my fuel. And off I went drove it down to 3/4 a tank and made it to my stopping point. Got in to go about 7 miles down the road and come to a stop sign and slowing down the truck died. I thought crap I forgot to turn off the auto start but never done that before. Stopped and stared truck as normal. Made it to my stopping point again. Headed back to the house and doing on average 55mph and truck surges like it wants to die but doesn't.
Rpms drop below 500 and it keeps going I get to same stop sign and slowing down again doing maybe 25ish and truck dies again as I have my foot on the break. Put in nut and started it right up and drive on home. Today went about same distance. Only this time I started it with key and was doing down other things while letting it run it just dies start it back up and take off get to where I was going and it surged or hiccuped so to say. Again started it once I was getting ready to leave and let it run for about 5 min and it died had the heater on as it was chilly out by the lake. Got in and restarted it and it was blowing cold air and had a diesel smell to it. Wife asked me if truck was going to blow up. Backed out of area and put in drive and made it 80' or so and truck died again doing about 10mph
Checked so far
Batteries checked and both are good
No mods done to it
New ICP sensor and pigtail
New water pump
New injectors 20k miles ago
Oil changed 1100 miles ago
New filters upper sad lower
2003 Ford F-250 King Ranch 6.0
I have noticed, in my 2012 Elantra with 32,000 miles on it, that my car is shaking at idle. I'll be at a red light or stop sign and the vibration is SUPER annoying. I have had it tested at a Hyundai Dealership. They couldn't "replicate the problem" and nothing it wrong with my car.
I may be trading this car in for the Veloster Turbo. I'm tired of how slow this car is. I know I sacrificed speed for gas mileage, but I have a question, does the Veloster have this problem as well?
Braking at a stoplight tonight, I had the VSC and ABS light come on. I pulled over to a parking lot and shut the car down. I couldn't tell any issues with the brakes at all in the short few hundred feet I drove to pull off. Turned it back on and the lights were no longer on.
View 8 RepliesMy '10 is just over 2 years old now and virtually trouble-free. But since new, I have a noticeable turbine/whining sound slowing to a stop esp while braking from 20mph to a stop. I wrote it off to the motor generator and brake regeneration - hybrid sounds. All fine and well. But I have ridden in two other '10s in the last year and they both seem to make less sounds while decelerating and braking than mine. Is it my imagination or is there something to it? I'd rather not blindly bring it to the Dealer as I'm sure it would get a "normal operation" finding.
1. Is there a TSB out on this by chance?
2. My 3/36 warranty will be up in 10 months. Is there a master TSB listing available on PChat or elsewhere (for free) to check on open G3 Prius TSBs?
I have a 04 lariat f150. Problem is every time I stop at a light or stop sign I hear and feel a bump. Coming from the rear I guess . Had my truck aligned asked the alignment person about the situation he said ford just do that. True or false ...
View 2 RepliesMy traction control light comes on sporadically when I am stopped at a light. Roads are dry and I have not hit anything. What is going on?
View 8 RepliesI don't drive (aren't you lucky?) but my wife and I own a '95 Ford Windstar and last summer we had issues with coolant leaking and had to have a few head gaskets replaced. Now, when we're idling at a stop light or sign, the oil light goes on but as soon as we accelerate, it goes off. The manual says the light indicated either low fluids (which isn't the case) or that the pressure within the system is low. The vehicle seems to run fine otherwise but I'm wondering if the oil light gauge has been set too sensitive?
View 7 RepliesI have a 2007 automatic jeep compass that is stalling. heres the thing, it only stalls when i am idle at a red light/stop sign. I also noticed it only stalls when its in drive. if i switch the car to neutral while stopped/idle it will not stall. i also notice this happens more frequently in the rain.
View 6 Replies3 mechanics can't find what is wrong but when I come to a stop sign or light my car stalls, not every time but a lot. Also, seems to happen more in cold or wet weather. So every time I stop and idle I have to quick put it into park.
View 2 RepliesWhen @ a light or stop sign the car vibrates excessively to the point it makes my daughter sick. I do feel it vibrating but it doesn't bother me but something is definitely wrong. There are no engine lights on, I can hear the top end tapping and clattering, I did check the valve clearances which seem to be barely within specs. She says it vibrates worse when the tank is full. She also said when the tank is full the front end shakes driving down the road. I'm kinda wondering the front end shaking with a full tank might be the rear struts.
View 4 RepliesMy Mazda tribute 2003 (manual) has developed a habit of 'pretending' to be overheated. If I do more than 2 or 3 stops as I run Saturday errands on a warm day - the care refuses to start and' continue' to run. I can start the car but have to rev the engine and restart at every stop sign and red light- If I pop the hood and wait about 40 minutes the car seems to 'cool' down and will run. The engine does not redline - water and coolant are fine - Is this just a faulty thermostat or is it some insidious vapor lock....
View 3 RepliesI have really taken care of this 2011 SF Limited with the 3.5 V6 but it has always seemed to idle rough at a red light/stop sign while in drive. Is this common for all the 3.5 V6 engines? I run a fuel cleaner through it before every syn oil change and also use top tier gas. It drives nice but like I said, at a stop in drive it seems to run rough at around 500-550 rpm's.
View 10 RepliesI have a Hyundai Santa fe 2004 6cyl 2.7 L , AWD. I am having problem of slow acceleration which is worse after a stop sign or red light. Sometimes while taking turns I feels like that I will not move and I was lucky to be not hit by a Car coming from opposite direction while taking a left turn today.
The Truck’s exhaust pipe broke recently and a auto garage welded it. But I am facing the above problem immediately after the repair of exhaust pipe. If I put more pressure on gas pedal then a mal function indicator comes and today I took it to another mechanic and he gets the error code of P0303 –engine misfire and wants to charge me ~ $600 $ to replace spark plugs and wires. The malfunction indicator goes off also while I am driving and can comes back after a while or a day. With the indicator on, the car drives erratic (minor jolts ) for few meters and then its fine. Since when I am driving on highways then I can go higher speeds without any problem. Is it still misfire issue???
It's an oldie, 1984, but so far still kicking. 6 cyl 2.8, carb. I took a little couple hundred mile trip a few weeks ago. Rolled back into town no problems.
A few days later I took a ride and the ranger would stall when approaching a stop sign or light. I would hold the pedal down a little to keep it running but it sounded like it wanted to die if I didn't feather the pedal to rev a bit.
I drove a few days later, as I was going down the neighborhood road(25 mph), it acted like it wanted to just die. I mashed the pedal and it had no effect. It didn't stall and eventually I could rev the engine to continue.
It continues to do the same, then will all of a sudden take off like there was never a problem. If/when it does stall again, it can be hard to start until it does start and off I go again like there was never a problem. Other times, it will idle.
Another note: Sometimes when I go to start the engine it will stutter, intermittently turnover. It has done the same thing while actually driving, kind of a jerking deal.
Fuel filter, fuel pump, electrical? I'm going to first check/replace the fuel filter tomorrow.
I have a 1987 ford f150 with a EFI throttle bodied 5.0L (302), and I have taken it to a mechanic multiple times because for one it has a dead spot in the throttle and it dies when you let off the gas at a stop light or sign. But the mechanic said he checked everything he knew to check and found nothing wrong with it. I also had my cousin read the computer previous to this and we couldn't pull the codes from it.
View 2 RepliesI have a 2000 Buick Century that only has 70000 miles on it. I have an issue that when I drive the car for a while, the transmission will shift hard after stopping at a light or stop sign. It only does it through the first three gears. If I shut the car off and let it sit for a few minutes and start it back up, it shifts fine through all of the gears. I have not had the change to change the fluid and filter yet. The fluid looks clean and is always full. I have read that there has been a common problem with a pressure control solenoid in the transmission needing replaced to correct the hard shifting. I am not getting any kind of error codes from the PCM, so I am not sure.
View 4 RepliesTrying to troubleshoot a very intermittent (has happened on two different occasions during the last 1,000 miles) hesitation from a stop-light. I've been recording engine parameters (Torque application) on both instances as these have been during longer trips after a period of highway driving. 2004 Excursion, 112K miles.
This feels kind of like severe turbo hesitation (4 to 10 seconds trying to start out before it kicks in) but I don't think that's it. The turbo is a new PowerMax turbo replaced 5 months ago. VGT readings seem pretty normal. The EGR valve is new -- the first instance was with the old and the second was with the new. I've also recently replaced the EGR and Oil coolers (before this).
Here's what's interesting in the captured data though... Normally when I coast into a stop-light the indicated engine load stabilizes at about 40-50% and VGT moves to about 65% to 70% at idle. The two different times this happened (actually multiple times at stop-signs/light close to each other over 5 minutes or so for both of these), when I have coasted to the stop, the engine load increases from low values during coast-down (0% during freeway coast-down or 19-30% during other coast) up to 99.6% (or other similar high values) at idle and VGT seems to be full closed at 85%.
There is absolutely no response to the throttle in this situation for 5-10 seconds. I've either been goosing the throttle a bit or putting it neutral and revving it up first to get things going again. When it finally catches and starts accelerating with power, indicated engine load drops to 50-60% again and VGT opens up to 40-60% or so. None of the other parameters I've been capturing seem to read strangely during this that I recognize. No issues observed during cruise and power seems good. No pending DTCs or engine light.
Here's what the data points I'm capturing (once each second):
Boost
Calibration Input Volts
ECT
EOT
Fan RPM
FICM main volts
Fuel Injector pulse width
ICP
ICP Volts
IPR Duty cycle
RPM
Engine Load
MAP
Trans Temp
VGT Duty Cycle
EBP
EGR Commanded
EGR Error
Added today but not captured during these issues yet:
IAT
IAT2
Baro
Accel Pedal Position
Mass Airflow Rate
Mass Fuel Desired
Just bought a L/Certified pre-owned 2013 ES 350. I am shocked at how much the car vibrates and noise increases when stopped at a light or stop sign. I tried a 2015 ES 350 and the same thing occurs!! The dealership technician says everything is operating "to specification". This is a disgrace for such a high-tech, luxury car.
View 14 Replies