How to fix or solve front turn signals that are not working? I just realized that both the front signals on my Prius doesn't light or flash when making a turn, the rear are working fine. Is this an easy fix or should I bring it to the dealer?
View 4 RepliesThis morning I got a yellow warning light flash for a few seconds and then turn solid after driving on the highway for a few minutes. It looks this: (_!_). It is located on the right of the dash display. I just changed my oil and put on winter tires myself two days ago. I hope it isn't related to my maintenance.
View 10 RepliesI just found a nice Prius C for sale with little damage to the front right corner, no frame damage or anything, just some bodywork needed. So, after it was fixed up. I brought the car back and there is weird issue that I have - turn signals and Hazard lights dont work. When I turn it on, i can hear clicks from it, but I dont see lights blinking on the dashboard and my head/tail lights dont blink as well.
View 5 RepliesI did my research and it turns out I need a relay switch for my blinkers. these bulbs are bright but flash too fast..
How do the relay switches work, what do i plug them into and do I need one relay switch per blinker?
I have an 01 2500hd crew cab which has turn signals that flash at hyper speed. the only bulb that wont work is the passenger side outer turn signal. i believe its a 194 bulb. it has no power to it. i changed the short harness and socket and still no power. the turn signal switch has been changed recently for another issue and this didn't correct the turn signal issue. is this a known common issue or do i need to pull apart my wiring harness and start chasing wires? turn signals work but blink extremely fast and it is a little annoying.
View 2 RepliesI've got an 1984 Chevy Suburban that when I put the Left Tun Signal on, All of the signals Flash (altho the Right side is weaker). The Right Turn Signals are working OK. Brake and Tail lights are Normal Are some wires melted together someplace?I am at a loss as to where to start looking for the problem...
View 8 RepliesHow to install load resistors in the front turn signals to fix fast blinking after led changing? I have two 6 ohms 50 watts resistors but I don't know how to install in the front turn signals.
View 7 Replies1998 Olds Intrigue 3.8L ... When I turn on the right signal on my Olds Intrigue the back light flashes faster than normal. The front light does not flash. I purchased a new light bulb for the front. I replaced the bulb. The back flashes at a faster rate but the front does not flash. I replaced the front and rear bulbs. The front does not flash and the rear flashes at a faster rate. Do you think there is a broken wire or broken signal flasher?
View 3 RepliesMy 2007 Hyundai Santa Fe right hand turn signal light bulbs flash rapidly both in the front and rear, the left hand side is normal. I am trying to locate the turn signal flasher module but without any luck, looked under the dash in the fuse box and under the hood in the relay box. Is it in the relay box...
View 7 RepliesMy 1996 GMC Sonoma's turn signals don't flash. The signal bulbs do come on when I flip the switch and I can simulate a turning signal by clicking the switch up and down (which doesn't make me feel silly at all, btw). All six bulbs appear to be working and I can't find any blown fuses. I have also replaced the multifunction switch (which is what two different mechanics told me needed to be done).
View 5 RepliesI have LED bulbs for the rear turn signals but will need to replace the relay so I don't get the fast blink. Where is the dam thing and how do you get to it to replace it?
View 4 RepliesI have a no spark no fuel situation. But my check engine light does not come on and my clock does not work. My turn signals dont work on the dash and the bulbs. But my hazerds work fine. 1997 yukon 5.7L...
View 7 RepliesComing back from a trip I got a e-brake light show up on the dash then noticed the signals stopped working and the heated seats no longer turn on. I scanned it with my AE and got a brake fluid sensor error come up but nothing about the signals .... is this a common problem or is there a connection between all this? 2003 F350 6.0L .....
View 2 RepliesI have had this problem for a while now, but can't seem to figure it out. I'm sure it's an electrical issue, but I'm not that great with electrical. My turn signals don't click when I push the handle in either direction. The turn signals come on and stay on but don't blink like they should. I checked the lights in the front and back and they just stay on but don't blink. Also my hazards don't blink. They just stay on and don't make clicking noise either. My horn doesn't work and my door doesn't ding with the key still in the ignition but in the off position. I don't know of it's all related or different issues.
View 10 RepliesI hear water sloshing around in the front when I make a turn. I am wondering the vent holes by the windshield wipes near the windshield are used to vent air intake into the cabin. Could this sloshing be coming from in there? Is there a drain hole and it f so where Is it located can I clear it? 2004 prius .....
View 12 Replies1994 Econoline E350. All the other lights work but on the front right the turn signal light flashes but the Hazard lite will not flash. I check for power at the wire at the light and there is none.
View 6 RepliesWhat might be causing this symptom?
View 14 Replies2010 F-250 14,000 miles, gas engine with Knapheide utility bed. Tilt wheel has been kept in the up position from day 1.
The problem:
No rear brake lights.
No high mount brake light.
No rear turn signals.
No rear hazard flashing lights.
All trailer lights work.
All other truck lights work.
Things checked: Fuses all OK. Visual inspection of multi-function switch. Looks clean. Brake switch at brake pedal has power on one wire. Jumpered the other wire-no brake lights.
I need to haul my trailer and am nervous when I see a Savannah, GA metro police car.
My mk4 jetta is causing me a hell of a fuss right now. The rear turn signals and the signals in the fenders are working but the front signals are both out. The signals blink fast as if it's a bulb but both bulbs and all fuses are good. When the hazards are on, they blink normal speed but the front lights are still out.
View 13 RepliesSwapped out the front turn signal bulbs for LEDs? Looking for pics or vids showing the difference between LED and stock.
View 17 RepliesI disconnected my DRL's (because I have HID's so they don't work) so I am currently using my parking lights (front turn signals, rear brake lights) as my DRL's, however my problem is that the front turn signals are not that bright, so what I can do to make them more visible during the day...
View 24 Replies