Prius (2010-12) :: Error Code C2311 When Press The Brake While AC On
Nov 27, 2015
Recently, when I ever press the brake while the head light or three AC is on, an error message appear for a few seconds ark malfunction.
View 6 RepliesRecently, when I ever press the brake while the head light or three AC is on, an error message appear for a few seconds ark malfunction.
View 6 RepliesI've got a cheap little ELM327 dongle that I was able to use to fix the dreaded backup beep on my 2013 Trim 2. What I'm looking for now are the codes to change the keyfob function so that the first press of the unlock button hits all the doors and the hatch - currently it just unlocks the driver door. (note: this is distinct from the number of doors that unlock when I touch the driver handle - I am aware of the "press both buttons" trick for that).
View 1 RepliesI am looking to buy a 2012 Prius and I test drove it. Everything seems ok except each time I press the brake pedal there is a swoosh noise its as if air is being released from somewhere and I can easily hear it. Is this normal? the car is 95000 km on it. The dealer says it might be a normal hybrid noise. I currently have a 2007 Prius but that does not make this noise.
View 5 RepliesI have a 2010 Prius Hybrid and lately, on an intermittent basis, I will press the brake pedal and push the start button and the dashboard lights up as normal but when I go to put it in gear nothing happens. The last time it happened the fan was running and I couldn't turn it off. It's like the car is all set to go but all the interior controls don't function. I then shut it off and restart it and everything works.
View 1 RepliesI had to change my fog light fuse tonight, no reason found for that. However, I somehow triggered an error code, P01C1. I managed to reset it, but what this code means?
View 6 Replies I have a trouble with my 2008 prius; red triangle engine light is coming and when i try to push the gas pedal it feels like it's freeze, the car does not accelerate so I have to stop.
After i turn it off and start again it drives ok, but a triangle is still there and there is error code POA90 ( two different scanners show same code with two descriptions; the first is "MOTOR PERFORMANCE"; the second describe it as "14-volt power module system voltage high").
Specially it happens when i drive up the hill and push the gas pedal harder. What it can be? I took the car to the Toyota dealer; they looked for 8 hours and find nothing; i can't do it again as the car do not have a warranty and the dealer charge for hours.
Bought my 2010 Prius with some issues, most of which are now fixed.
The remaining issue is the mentioned A/C error code: B1498 A/C Communication malfunction (A/C inverter local)
What part this is, and the OEM part number? Where is it located in the car?
Previous owner claimed it was some error with the A/C Control unit.
I have a Toyota Prius (2010), and the car has run for about 2800000 kilometers. One day when a was driving my Prius the engine light suddenly get on. So I went to a car car mechanic, he checked the car and told me there was an error code (error code: P0401, exhaust problem (exhaust recirculation flow).
So I bought a liquid that I put in the gas tank, the liquid would clean the exhaust pipe, but the engine light was still on. The engine light is usually on at least 2 weeks, then disappear for about 2 days and come back in two weeks…The car is driving normally without any problems.
So got this P0A93 code when I was driving on the highway about 65mph, scared to me death when big yellow warning light came on so I returned home and turn the car back on after 30 mins the code and all the warning lights were gone I checked under the hood felt the pump everything was good. I just got done 90k maintance on the car from dealer. So my question is that could be computer error or it could be water pump malfunction? On warranty manual the warranty for inverter with converter covers under 100k so dealer should be able to cover the water pump if it's broken? I driven the car today again at normal temperature and full blast AC on, then again no engine check light on and warning light no message.
View 4 RepliesIs there anyway to disable this annoying "press brake pedal to start" on the 2010 with Vag Com or some other magic tricks? I searched and found a thread but no solution if there is any.
View 8 RepliesI have a Toyota Corolla 2010 LE. When I'm driving, no matter how fast I drive, I feel a vibration sound. When I press brake pedal, it's worse than driving. I recently replaced front rotors and brake pads. I also replaced whole tires a month ago.
View 9 RepliesIs it all the lexus rx350 had that noise? From the day I noticed hissing noise when I gentally press the brake pedal down and release it . And same noise can be heard when drive slowly and release gas pedal.
View 10 RepliesSo of course it has to happen 3 weeks after my warranty expires. My CEL comes on and I have it read and the result is P0440. I find out that my wife has a habit of topping off the gas tank and so I am thinking that she has probably ruined the charcoal canister. It is something easy to replace?
I have an 06 limited edition... Yes, she will not be topping off any gas tank anymore.
Yellow triangle lighting up together with check engine light.
Also when turning it on display says to press brake and push power to start.
I have a 2006 Pri with 194,000 miles on it that has been dead reliable & owes me nothing really, now developing a serious problem. Only when it is below about 10 deg F I will get total failure of the power braking system on or shortly after startup Has happened on 3 days this winter. ABS light, Brake warning, continuous high pitched beep (very annoying warning the driver of immanent death!
When this happens I get almost no movement on the brake pedal. It's rock hard & acts pretty much like loosing power brakes on any car (ie. you will eventually stop, but not a safe condition). There is no transition to this condition. It's either "everything normal" or total failure. Brake fluid reads half way between min & max and looks clean, no sign of moisture, but has never been flushed.
The last time it happened I was leaving work, couldn't swap cars... so I drove straight to the dealer (white knuckled). Dealer calls the next day saying it's the Brake Actuator needing replacement. I told them I wasn't spending that & to look again for a cheaper problem like Fluid, 12v battery, Relay...
No dice. They confirm it's the actuator.
The code they read is C1256. They "checked resistance at actuator pins & found high resistance at pins 1&2." I'm thinking about just topping up the fluid a bit more, or getting the fluid flushed & changed, or changing the 12v battery (I need to check voltage on next cold morning), or just not driving it at those temps & hoping it doesn't get worse.
My 2006 Prius with 206k miles is making a loud buzzing/grumbling noise when I press down the brake and periodically when parked. It's coming from the general area of the brake pedal, under the steering wheel. See video for a recording of the sound:
View 2 RepliesI can press on the brake pedal when car is off or on and there is a kind of quirky sound made. I can hear a pump sound and then a squeaking or quirky sound. It happens every time I press the pedal when it is stopped, either on or off.
View 2 RepliesMy 07 prius with 190k started shaking violently when going down hill if I press the gas or brake at all is goes a way suddenly, this happens only around the high 40's to low 50 mph range and once at 75, this happened just after my tires where balanced and rotated brought it back they re balanced them and said they balanced out perfectly and the problem still protested. I drive on dirt roads all the time and i hit a big pot hole earlier last spring but the issue just started after the balance a week ago.
View 13 RepliesI've a UK 2004 gen ii with 69000 miles on the clock. When coming to a stop and also when at a stand still if I press down the brake pedal I get a rather loud creaking sort of noise. I guess that's friction brake related as no noise with using brakes when driving. Also a high pitch squeal when driving and turning steering wheel slightly to the left that stops when you press the brake pedal.
View 19 RepliesI just purchased a 2014 Prius C and am having a problem with the Hill Start Assist/Control.
At every single stop, no matter how lightly I press the brake, when I release the brake the car stays in place for two seconds (no gas), and then starts moving.
I am assuming this is the HSC and not a normal function on the car.
If I depress the brake all the way no lights come on, no buzzer sounds, but the above described behavior still happens. I've tried the light stops on up hills, down hills, and flat ground, it all is the same.
I have a 2007 Toyota Prius. When I press the brake pedal and press the start button the engine does not start or the wheels are not powered by the battery. It gives me the following errors:
The indicator in the Start button lights in Amber Color.
0 kmph mark is not activated in the dash board pannel.
When I shift the gears it only shifts to neutral ("N") gear.
I cant move the car forward or backward. An error message is displayed in the MFD in Japanese language. It is in Japanese and I cant read the error message.