Prius (2010-12) :: 2008 - Getting Error Code POA90?
Sep 26, 2011
I have a trouble with my 2008 prius; red triangle engine light is coming and when i try to push the gas pedal it feels like it's freeze, the car does not accelerate so I have to stop.
After i turn it off and start again it drives ok, but a triangle is still there and there is error code POA90 ( two different scanners show same code with two descriptions; the first is "MOTOR PERFORMANCE"; the second describe it as "14-volt power module system voltage high").
Specially it happens when i drive up the hill and push the gas pedal harder. What it can be? I took the car to the Toyota dealer; they looked for 8 hours and find nothing; i can't do it again as the car do not have a warranty and the dealer charge for hours.
View 3 Replies
Advertisement
I have a Toyota prius 2008 with 130,000 miles. I kept getting red triangle sign, the car will slow down and will need to pull over, shut it down and restart. I went to the dealer. First they diagnosed 12V battery issue, so we got that replaced. The red triangle sign kept coming, so we went to the dealer again, they replaced transmission fluid. They said it was low on transmission fluid. The red triangle sign kept coming. So we went to the dealer again. They said it is transaxle internal problem. The diagnostic code is P0A37. I have a couple questions. In California, what is the warranty for Transaxle problem. In some posts I saw 180,000 miles, 10 years. The dealer said they called Toyota and Toyota does not cover the repair. It is a costly repair. Second , is this code really requires Transaxle replacement.
View 16 Replies
I had to change my fog light fuse tonight, no reason found for that. However, I somehow triggered an error code, P01C1. I managed to reset it, but what this code means?
View 6 Replies
Bought my 2010 Prius with some issues, most of which are now fixed.
The remaining issue is the mentioned A/C error code: B1498 A/C Communication malfunction (A/C inverter local)
What part this is, and the OEM part number? Where is it located in the car?
Previous owner claimed it was some error with the A/C Control unit.
View 1 Replies
Recently, when I ever press the brake while the head light or three AC is on, an error message appear for a few seconds ark malfunction.
View 6 Replies
I have a Toyota Prius (2010), and the car has run for about 2800000 kilometers. One day when a was driving my Prius the engine light suddenly get on. So I went to a car car mechanic, he checked the car and told me there was an error code (error code: P0401, exhaust problem (exhaust recirculation flow).
So I bought a liquid that I put in the gas tank, the liquid would clean the exhaust pipe, but the engine light was still on. The engine light is usually on at least 2 weeks, then disappear for about 2 days and come back in two weeks…The car is driving normally without any problems.
View 2 Replies
So got this P0A93 code when I was driving on the highway about 65mph, scared to me death when big yellow warning light came on so I returned home and turn the car back on after 30 mins the code and all the warning lights were gone I checked under the hood felt the pump everything was good. I just got done 90k maintance on the car from dealer. So my question is that could be computer error or it could be water pump malfunction? On warranty manual the warranty for inverter with converter covers under 100k so dealer should be able to cover the water pump if it's broken? I driven the car today again at normal temperature and full blast AC on, then again no engine check light on and warning light no message.
View 4 Replies
So of course it has to happen 3 weeks after my warranty expires. My CEL comes on and I have it read and the result is P0440. I find out that my wife has a habit of topping off the gas tank and so I am thinking that she has probably ruined the charcoal canister. It is something easy to replace?
I have an 06 limited edition... Yes, she will not be topping off any gas tank anymore.
View 2 Replies
I have a 2008 Sports Trac, with a 4.0 SOHC engine ... 165k miles. Last week my check engine (CE) light came on and the code is P0401 ... too little flow on the EGR system. I first tried cleaning the existing valve - but CE light still came on. So I replaced the old EGR valve, cleaned the SS tube from the exhaust manifold back to the EGR valve and the CE light is still on. I have not driven the truck since I replaced with the new valve ... only fired her up in the garage. Is this something that could possibly clear up given a couple of miles?
View 6 Replies
I just bought a F150 with 103,000 on it. The engine is a 4.6. I get a P0605 code every now and then which doesnt effect performance. I erase the code and it doesnt appear again for maybe another 100 miles.
I suspect a loose connector but not sure. Looked up the code and it reads PCM READ ONLY MEMORY (ROM) ERROR. My question is what does the PCM operate? And wheres a good place to start troubleshooting?
View 7 Replies
As the title says it all I have a 2010 Malibu LS with roughly 88k on it and just noticed that the CEL light came on last weekend. On Monday the light went ahead but it came back on this morning. Took it to Autozone and the error code was P0172, Fuel System Too Rich, Bank 1. I noticed this happened last weekend after putting in some gas at QT. The Autozone guy recommended some fuel injector cleaner as a starting point and recommended using pure gasoline (premium).
View 12 Replies
4l60. Tranny 08 xpress. I'm getting p0700 code. 2 weeks after first getting code the tranny went out. Replaced tranny but still getting the same code. Should I b worried and how can I fix it.
View 3 Replies
I have the error code P0340 and have changed both camshaft positioner sensors, cleaned the air sensor and throttle body and still the engine stalls. I can accelerate at 40, 50, 60mph and it jerks violently. I tried the "locking it in third" trick but it still jerks. Today I unplugged the left cam sensor and the truck idles @ 400rpms, does not stall, and pretty much drives great! Hook it back up and crank it, within 10-15 seconds it stalls. I plan to check the wiring....
View 14 Replies
I have two codes off my "digi moto lite" obd2 scanner....
P0201 - internet search suggests it's a fuel injection code....
However I can't find anything on code C3203....
View 8 Replies
I recently changed from a problem-ridden SCT Livewire to a SCT Xcalibarator3, and now when running my custom tune I get a check engine light and a error code P0605. I never got this on the same tune with the Livewire. What causes this and how to fix it?
View 4 Replies
What would make the OBD II not read the code that is set on my truck. It says "Communication Error..." Fuse 41 grants power to the Diagnostics port and the cigarette lighter. The cigarette lighter is working. Any other reasons I can look at?
View 3 Replies
My 2007 Ford F150 Lariat (5.4L) with 82k miles popped a P0307 (#7 misfire) code one chilly morning. It began stumbing and hesitating a bit between 25-35mph, and each time it occurred, the engine light would flash on and off. Hesitation clears and light goes steady. Cleared the code and didn't see problems again for a month...until the next cold day (freezing temps). Popped again and hesitation returned. Ford dealer wants to change plugs. I've read coils can also cause the issue. Not sure if I can do either myself.
View 4 Replies
I have a 2008 Camry Hybrid and recently got a "Check VSC System" warning light. A diagnostic resulted in a C0210 error code. The code is for a right rear speed sensor malfunction.
I had a local shop look at it and he replaced the hub accembly including the speed sensor. It didnt work. He and I took a ride and on his diagnostic tool, the speed reading for the right rear wheel was all over the place.
The next day he replaced it thinking that the new sensor was bad. This worked, however only for a day. Now the light had come on again with the same error.
View 2 Replies
I have a 2013 Prius with all of the packages. I'm getting messages on the screen reading ...
Error Code: ID 1011
View 1 Replies
I just bought a used 2008 Prius. I had my Prius inspected after buying it, and the error code C1378 appeared, which I have discerned refers to the Skid Control ECU.
There is apparently a recall for this part in 2010-2014 models, however as a 2008 I don't think I apply.
View 6 Replies
Just used Carista to switch to a single beep when reversing. Whilst I was in the app, just out of curiosity, I checked for error codes. B1423 appeared. I didn't expect to see anything as the car is brand new.
View 8 Replies
