Prius (2004-09) :: Noise Coming From Every Wheel - Bearings?
May 19, 2015
As the weather got hotter, I have started to drive with my windows half-down when driving through city for short distances, otherwise I use AC. What I noticed about one month ago was the noise coming from the wheels when going over bumps. It is really annoying and sounds like when you shake metal balls in a pocket.
Firstly I thought that it was coming from the brake calipers, so I replaced all the shims (actually, I have replaced rotors and pads also as they were pretty rusty and I got a good price on them). However, the noise is still there. Yesterday I got my tires replaced for the summer ones and as I was checking afterwards if the bolts are tightened correctly, I noticed that if I shake the wheel (really hard) then I can replicate the noise. To have it summarized.
What I have tried already: Replaced rotors, pads and shims on every wheel and ensured that all of the bolts are tightened correctly. And I have also googled about this problem but every finding was about the shims not fitted correctly.
What are the symptoms: Strange metallic noise coming from the wheel (every) when going over road surfaces that are not perfectly flat and with windows down (when they are all up, I cannot hear anything). I can replicate the noise if I shake the wheel (with car on the ground).
I have taken video of the noise and hope you car hear it, but I think it is pretty noticeable. It sounds like the bolts are really loose but I have ensured 10 times that they are tightened and also as I wrote previously the noise is coming from every wheel. You cannot see it on the video but I'm filming with one hand and shaking the wheel with another (pretty hard), that's why the whole video is shaking.
View 10 Replies
Advertisement
My 2005 Prius has 95k miles on it. I've been hearing a cluck-cluck-cluck noise from near the front driver side wheel. I had an independent mechanic test drive it, who said the wheel bearing needs replacement. Should I have it checked out by a Toyota dealer? They're so much more expensive, but are is it worth taking it to them?
View 15 Replies
I have been getting increased noise coming from the back of my car for the past month. So I jacked up the car and spun the tires and heard grinding noises in the rear right. I have a 2012 ToyotaPrius plug-in with 33,000 miles. When driving the car around 40 miles an hour there would be a howling sound coming from the back of the car regardless of the type of pavement I was driving on.
So I took it to the dealer today and they had it up on the rack in about an hour later they came to me and said it needed new tires and it would be about $700 and that this was likely causing the noise. I said that there was no way that it was the tires so I went and showed the mechanic how old the sound was coming out of the back right wheel. He listened with his stethoscope on the wheel bearings and said that he did hear some noise in there but still thought it was the tires.
View 19 Replies
I gotta a roaring noise coming from my right front while turning. Planning on replacing just the wheel bearings tomorrow & not the whole hub assembly(2008 2wd). Is there a thread that lays out the steps and other parts I may need? I've seen alot different stories on the net on how to do it. Everthing from I can press new bearings to I have to do 4x4 hub conversion. Seems to be some confusion.
View 2 Replies
My front wheel bearings on my 2007 Prius are loud. I think its the drivers side. Where can I buy prius OEM parts online and part #s?
View 4 Replies
Our 2011 w/140,000 miles has a variable front end noise that I suspect from past experience with other vehicles is a bad wheel bearing. I've seen posts of the procedure for replacing the Gen 2 bearings that requires the hub and bearing be pressed out and new bearing back in which would limit the DIY'er, but looking at the replacement parts diagram for the Gen 3, it appears that the hub and bearing unit is bolted in with 4 bolts and may not need a hydraulic press to install.
View 4 Replies
I've been having a lot of noise coming from the front left tire, and I finally had it diagnosed as a bad wheel bearing today.
I noticed that the front wheel bearings are sold individually while the rear wheel bearings are sold as hub assemblies. Is there a certain way that the front wheel bearings have to be removed and pressed on? I'm trying to see if this is a DIY repair.
View 14 Replies
I ve this annoying sound in my car and i think its my rear wheel bearing. My car ( 2005 3.0 TDI V6) is also due for the 4th Long Life Service. I was told that this is a major service.
View 6 Replies
After having another car ram the front left of my gen 2 I've noticed a hum/drone/vibration noise coming from that wheel and in the space of 10 days the noise has got really loud, it's quite embarrassing as even my taxi customers are commenting on the sound, is it possible the smash .
View 5 Replies
I have some whine coming from my front wheel bearings so I'm going to replace them both. I'm not sure if this had been done on my truck before, but I'm thinking so since I have Moog greaseable ball joints.
Truck has 250k miles on it. I'm going to check the pads, rotors and slide pins. Anything else that might need work? I'm sure the half shaft could use a once over, but I don't keep my hubs locked so they don't turn much in regular driving.
View 7 Replies
We have an 07 Prius with around 150,000 miles on it.
A couple of weeks ago I noticed a slight knocking noise coming from the passenger front wheel area mainly when I was turning toward the right.
Question.......So when turning to the right, it first seemed to me that the right side would experience a heavier load. However, after further thought and applying some physics the inertia of the car would actually be putting a heavier load on the left side during a right turn. Which is correct?
Just trying to troubleshoot the noise/problem.
#1 when I apply the brakes, the noise doesn't change. I don't think it's brake related.
#2 the noise speeds up with speed, meaning that it's rotational.
#3 The noise does get louder when I am turning right but has know progressed into a constant noise going straight. During a left turn it subsided.
#4 I did take my floor jake and jaked the pass. front wheel up but didn't see anything broken or damaged. I couldn't rotate the tire though.
#5 I also had the tires rotated today and the noise got worse.
View 8 Replies
After my Chevy Prizm took its rightful place at the junkyard two months ago (transmission failure on a car with a bad engine and suspension problems is, and should be, fatal), I got a 2008 Honda Civic to replace it. I had it checked out before buying by my mechanic, and I've driven it a few thousand miles without many issues. It had just under 42K on it when I bought it (former lease bought at new car dealer sale by the local place I bought it from), has just over 46K now, and has new Bridgestone tires on it that my mechanic says are worth $700-800. (I don't know exactly what kind they are, which is why I include that bit of pricing info.)
Last week I noticed that a sound I'd been hearing intermittently (to the point where I wondered if I was imagining it) became steady and consistent at 60mph. It's a "hooooooooo" sound, very resonant, and it's driving me crazy. It's gotten louder and louder, and it's now happening around 30 mph and above. It's been consistent since last Friday and getting worse every day.
Underneath that sound is the soft drone of what I assume is a wheel bearing going bad, which is still intermittent and has only started in the last few days. This is what causes me to believe what my mechanic said yesterday, which is that one of the front wheel bearings needs replacing. He also said I could wait until the sound "gets louder" before replacing the bearing -- I assume he means only the droning sound, not the resonant hooting that I hear every time I get onto a main road now. Because I believe the resonant sound COULD get louder, but I don't see how a person could keep driving under those conditions without actually going insane.
I scheduled the car to go in tomorrow to have that bearing fixed (for between $300-500, he said, which seems really pricey to me). But I'd like to know whether this is likely to solve the resonant "hoooooo" sound as well as the "wow wow wow" sounds that I associate specifically with a bad wheel bearing. My mechanics checked the suspension and rotated the tires yesterday while doing an oil change, too, and said everything looks tight and good, and the tire rotation had no effect on the sound I'm hearing, which is strongest from the driver's side front and is, again, louder every day.
(I know Civics aren't supposed to be great on road noise, but the fact that this has clearly gotten measurably worse over only a few days makes me feel its definitely mechanical and not just the usual ambient highway noise.)
View 5 Replies
I just got a new Sonata and I find the car has a noise like bad wheel bearings in front, it sounds like driving on really rough pavement.. I have changed the tires and still get this..
View 1 Replies
I drive a 2006 Volvo V50 with 65k. Recently the car started making a noise and the dealership told me that I need new front wheel hubs because my bearings are shot. The car has always been well within the weight limit, has never been through deep water (we do line in the pac NW so there is a decent amount of rain), and has had complete service at all of the maintenance times. I think that under 125k bearings should not be giving out and that volvo should replace the bearings for free - the mechanic is telling me that there is no set time for bearings to wear out - it can happen at literally any time/mileage/age and it would not be the company's fault. Who is correct?
View 10 Replies
Front wheel bearings making noise. Can I buy replacement bearings/races/seals, or must i buy a whole new hub front assembly?
View 3 Replies
I have an '06 F-250 that's making a quiet grinding/humming noise from what sounds like the front end. It doesn't seem to be coming from any side in particular, just an omnipresent noise whenever the truck is moving. It's constant with speed, and most noticable between 30-60 KPH.
Truck has about 268,000 KM on it right now, and has been worked pretty hard for whatever that's worth as well.
View 3 Replies
99 F-250 Ext cab 4x4 7.3 285,000 miles.
I got home today opened my door and got snaked in the face with the smell of brakes. I got out of the truck then I heard the drivers side rear brakes popping as they are cooling down. I reached down to touched the wheel and it's crazy hot. Opened the garage and went to retrieve the infared thermometer. The rotor/caliper was 350 degrees, hub was 150 degrees, axle tube was 90 degrees.
I took the wheel off and inspected stuff. The rotors do have some heat spots, the caliper visibly looks okay but not 100%. The pads look like even wear. I am guessing that the caliper either is hanging up or I have a wheel bearing going? The passenger side was like 80 degrees on everything. There is a slight shimmy while driving which to me feels to me like the beginning of warped rotors. I don't hear anything to me that screams wheel bearing noise wise.Brakes or bearings?
View 7 Replies
I bought a 2002, being a total new by I thought that faint humming noise was the electric motors doing , it's thing. Noise was faint when only me in the car or going slowly. Well as soon as I had someone sitting in the rear it was a loud humming droning noise that seemed to get quieter when making right turns like heavy off ramps at speed.
Finally jacked the car up and checked for wheel bearing noise. Fronts were too hard to check as there was resistance while turning wheel by hand, but the rear passenger seemed rough but no noise or looseness while turning by hand compared to the driver rear side.
View 5 Replies
I got an 08 F150 2wd. I noticed lately a mild roaring noise coming from right front wheel, but it only does it when I'm turning left. There is nothing while driving straight or during right hand turns. Only happens during left hand turning.
View 1 Replies
I have a 010 Ford Flex. It has 36k miles and bought it a yr ago with 24k miles. I have had 2 or 3 wheel bearing replaced earlier this Summer and one of the replacements already went bad and was replaced yesterday. This makes the count 4 now.
I say 2 or 3 because they had to get 3 of them. I am not sure that they replaced 3 of the bearings or if two were replaced and one of the replacements were bad and had to be reordered. I smell inferior parts. Love the Flex but am afraid the bearings issue will reoccur.
View 14 Replies
2009 Honda Civic, 54k miles, new tires (<10k miles), loud roaring when driving. Tire dealer says wheel bearings on front left tire are going out. Should this be happening on this car? Drove a Toyota Camry for 14 years and never replaced wheel bearings.
View 9 Replies
