Well one of the bulbs in my regular halogen housings went out, so I went and bought a pair and replaced the bulbs. Everything was great until I took a testdrive and noticed I was signalling MIR (or I guess the ISS this millenium) illuminating road signs very well, and the ground not so well...
View 2 RepliesI have a 2008 Prius pkg 6, passenger side headlight goes out, and then later comes back on. Went to parts store and they sold me a lamp to replace it with. Not only do I not know how to replace it, I do not know whether it is a Halogen or HID lamp?
View 10 RepliesAfter months of researching and foruming, I made a satisfied decision to upgrade from Halogen to aftermarket HID Bi-Xenon which is really great in color and high visibility at night.
Moreover, behind Halogen headlight there is a 8mn bolt where you will use your hand or 8mn wrench (remove the black plastic cover over bumper to make more room). Twist it Clockwise to lower and Counter Clockwise to raise headlight.
I aimed mine relatively low because my intention is for a great looking light, high visibility and not blind on-coming traffic and yeah I'm so satisfied.
My husband is rebuilding our 07 Prius that has HID Headlights that were both broken and does not want to go back with HID due to cost. He wants to install complete Halogen Headlight assemblies from our parts car. He has rebuilt several Prius' for friends and family but has not done a change like this so he understands the basic differences but is stuck on the Wiring change to handle the low and high beam differences. Wiring is not his strong point!
View 19 RepliesWell I had this issue with my car. Needed a new bumper. I guess the shop screwed around with my re-aiming of the headlights a bit much. I touched it a bit and boom. light faces the ground
I am familiar with this issue and all u have to do is get the white part on the screw to slide back in the black at the top of the pic then the aim will operate correctly.
My issue is the white piece seems stripped from to many turns. it will not go forwards or backwards using the screw aim adjuster.
Well I put some HID light in my 2001.5 GLX Passat an I notice that they are aiming kind of low. I know which slots are what. Ones for highering and lowering and the others from side to side. But when I'm trying to adjust them the up and down they work but when I'm trying to adjust the side to side they seem like they aren't moving. Which is a better way to tell? I put it right next to a wall 25 feet away in the dark but I really couldn't tell still. Plus it's not a straight line either. Since I have the perjecter lights their should be a cut off line right? Also is it like turning it right to make the light go right or left to go right, for the side adjustments?
View 2 RepliesI have an unusual issue with the drivers side headlight. I recently got a used 2008 ES350 and the drivers side headlight aims high and dazzles oncoming traffic. I have adjusted the two screw adjusters their full range but cannot get the light to aim horizontally. The lights are HID AFS. The car was in a previous accident and the front drivers side wing was repaired.
I have a feeling the body shop did not do a great job (the paintwork is not great) and the light may not be mounted at the correct angle. The AFS works fine for the LH headlight but I don't see much movement of the RH light? Perhaps they installed a non AFS unit during the repair. How to check the alignment of the headlight assembly and body work, and how to correct the headlight problem if the screw adjusters don't move the beam.
I think the light on the passenger side is aiming a little low compared to the other. Is it possible to change the aim vertically manually without going to the dealership?
View 3 RepliesI have an '06 Toyota Avalon XL and I bought some Silver Star 9006 bulbs at AZ the other night, but when I got back home, pulled into the garage and popped the hood, I was amazed at how much of a PITA it looked to remove the low-beam bulb, especially on the driver's side. I'd hate to take it to the dealer just to get the frickin headlight bulbs changed.
View 2 RepliesSo I bought a set of Phillips XTreme Vision bulbs for my GTI VII S. Problem is that I cant seem to open the rear housing of the headlight on the drivers side to gain access to make the switch. The gearbox is right behind and there is barely room to get my hand back there. Is there some trick I am overlooking?
View 3 RepliesI have a couple of questions regarding changing out my headlight from halogen bulbs to an HID kit.
1st) What size bulb are the low beam (headlights)?
2nd) What HID kit would be recommended? I am trying to replace the halogen bulb with an HID bulb, a plug and play HID kit that will last but also does not reflect every where such as replacing reflectors with halogen to an HID kit.
I finally purchased an RX30 for my wife. The Halogen headlight isn't all that bad, but I am used to drive with HID. Therefore, I am buying HID kits for my RX350 Headlight. Whenever it is shipped to me, I will take pictures of the progress.
1/ Link to buy HID kits, OEM is 55W (no need for extra Hardnes) and 6000k is common factory color.
This will come with everything needed to convert your light bulbs into HID white colors. For more Colors please check out the guide on the website.
I recommend this site, because I have used it, purchased it, and have had no problem with it so far.
2/ According to Manual Book
****Low Beam is H11****
Fog Lights is *****H11*****
****High Beam is H9*****
**** 55W *****
3/ The installation should be Relatively Easy
--Take off engine plastic cover on both side--
--Access the Light Bulb--
--Use the OEM Plugs into the Ballasts input of the HID KID--
--Mount the Ballasts at a convenience locations, I had great success with Plastic ties--
--There is a Plugs output from the Ballast, Plug it into the HID Bulbs--
*****If the lights don't turn on after installation, try to switch Polary, or turn the original plugs around
****** Halogen doesn't care about Polary, but HID Ballast does.
--Install the HID Bulbs the same as regular Halogen Bulb--
--Check the HID carefully, make sure that both will work--
First time Installer common trouble shoots.
1/ Only 1 light is working......Switching the bulbs, or Polary will solve your problem
2/ Lights common for a short time then turn off, until engine restart......You will need the Hardness Relay, which should not occur in our car. The factory hardness is good for 55W
3/ Bulb Visually contain Contaminants, or White particle inside.......HID Bulbs has Special Salt in it, which is required for a longer life in the Bulbs. This is the way the bulbs are.
Looking for a rundown on LED versus halogen headlight bulbs, especially output and life? Stock halogen bulbs using 55 watts have a 4000K output, and I notice the Chinese imports' output is 3200-3500K. Does that translate into less bright? Also, the windshield wipers shudder across the windshield a lot unless there's a huge amount of rain--changing to new blades didn't make any difference.
View 5 RepliesHalogen Headlights keep failing on my 2007 Prius Hybrid. I'm starting a file on this because my headlights fail waaaaay too often. I first bought replacements from O'Rileys (don't know the brand) and one failed after only 3 months. . . they would not replace the bulb for free so I did buy one more bulb there. The next time I purchased two Philips bulbs at another parts store. The last ones I bought were from Napa Auto parts and I have to replace one of those. I am wishing I had kept better records because there have been more burned out low beam headlamps. . .never use the brights.
View 9 RepliesTried to find how to adjust the headlight on 2014 IS250 since it was lowered on RSR Super Downs. Very hard to see anything up front with lights beaming down on the ground. I've tried to find it in the manual book, but it's not there. Found only DIY for 2nd GEN IS's. Seems like the 3IS is different from the previous GEN.
View 6 RepliesThe dealer tells me my oil is leaking and I need a new oil pan. After leaving the car in the garage overnight, I backed it out this morning and there is absolutely nothing under the car except a couple of water puddles (we've been having rain). Can my oil leak and not get on the ground?
View 7 RepliesToday when I am driving the 2007 Prius, suddenly heard some noise. I managed to come home and checked. There is a black plastic piece hanging and touch the ground, the noise was from this black plastic piece touching the ground. Attached is the picture.Is this a big problem? Can I continue to drive the car to repair shop to get this fixed?
View 6 RepliesIs it possible to replace my stock Prius 4 halogen headlight assemblies with the Prius package 5 stock LED headlight assemblies? Is the wiring the same or totally different? More trouble than it's worth perhaps?
View 19 RepliesI have 2010 proud and headlight assembly is broken. What is difference between HID and Halogen headlight assembly? Would it be possible to by halogen assembly and just use Existing LED bulbs?
View 3 RepliesI have my daytime running lights on all the time since purchase in 2004 - this is the first time I am changing any kind of bulb on the car.Headlights are ok when starting car, but after it warms up the headlight goes off. Took it to my local repair shop and they said the connector was loose but that night the headlight was off again.
View 9 RepliesBought an 04 a couple of weeks ago and the passenger side headlight is way high.I turned the adjustment knob and it does nothing.The drivers side light is fine,but out of curiosity I turned that knob and it didn't do anything either.I'm thinking about buying an aftermarket assembly.
View 1 Replies