Prius (2004-09) :: Grinding Noise When Braking At Low Speed
Feb 24, 2013
Bought my Prius (2005, with 160K miles) about a month ago and since I've had it I am hearing a metal on metal grinding noise when braking at low speed. How loud the sound is depends on how hard I am on pushing on the brakes. One of my co-workers has the same model and said that his does not make that sound. Not sure if its just because it has after-market brake pads or something? This noise only occurs when braking at low speeds (below 10 MPH) so I assume its an issue with the front brakes.
Is this something I need to get looked at by the dealership? I had a local mechanic that worked on my old Honda beater take a look and he said that the rotors and brake pads looked new and wasn't sure why they'd make noise.
View 3 Replies
Advertisement
So my dealer diagnosed my 2007 Prius with a transaxle issue, but what bothers me is that it doesn't make the sound all the time. When I brake lightly, there is no sound and when I brake heavily there isn't either. It is only when I do a medium brake above 7 mph of course and around 20's mph range. I am hoping for something besides the transaxle...maybe a wheel bearing...anything.
View 19 Replies
I may be worrying over nothing but lately when I brake or accelerate I hear a grinding noise on my radio. I listen to AM. With my other vehicle it usually meant there was a problem somewhere.
View 1 Replies
My car was making a weird grinding noise when braking above 7mph. I did the neutral brake thing and seems to go away sometimes. The dealership said it needed new rotors and brakes, so I went ahead and did that with them, then called me to let me know the sound did not go away. Now they are stating my grinding noise is coming from the "inverter generator" which is what they said was the transmission. I am just curious why this goes away sometimes and if it's related to my previous issues with the car.
View 1 Replies
Just purchased a used 2008 prius with 80,000 miles on it. Braking system makes slight grinding noises when getting below around 10mph. I know the brakes are different, so I'm not sure if this is normal or if it means my brake pads need replacing? Car didn't come with an owners manual .
View 6 Replies
The noise is somewhere between a tin rattle and a bearing grinding heard most when braking but constant under say 10 mph. We have not been able to pinpoint where exactly it is coming from but I believe it is front drivers side.(but really could be anywhere) it is not dependent on rpm, nor gear or clutch engagement, Nor hubs engaged or disengaged.
The drives side front hub, rear hubs' bearings(races and seals) have been replaced. I have the passenger side front hub to do as well, just haven't gotten to it yet and it doesn't seem bad. we are all stumped on what it is. It seems to relate to the rotating assembly though as it seems to change with speed. it almost seems like tire rub, but there is no scaring or marks of any sort anywhere for it.
Vehicle is a e99 f250 short bed ext cab. open diff if it makes any difference. My next thought after the hub is pinion bearing? Could it be something to do with abs? say the truck is 4 wheel abs but the fronts are disconnected (trying to figure out if it is 4wabs as it appears to have connectors, but the original hubs did not have the hole for the sensors. no abs light comes on, but that could be a bad bulb too)
What we have found is hubs locked or unlocked, 4wd engaged or disengaged, and happens at right around 16 mph, braking, accelerating, clutch in or out, in gear or in neutral. All 4 corners have new bearings. We have found 2 things, 1 is the track bar bushings are shot (don't think this is the source of the noise but could be wrong and i will be replacing those..once I have money in again.. 2 the passenger side leaf spring when wacked with your hand makes a different sound than the drivers side.( could be a matter of different loads, but figured worth noting)
There are 2 noises, the first is the noise we hear, the second is one that i found when doing the noise reduction (loud meaty tires you cant hear the noise in the audio without reduction) I think that that was one of the hubs, or maybe the brakes, I am unsure, but it happens at different locations in the video.
Audio : [URL] ....
View 11 Replies
I've read a few posts about the Prius braking system. Just wondering what other owners have done when they experience the metal grinding noise and when brakes need to be replaced. My car has around 67,000 miles. I was planning to take it to a Toyota dealer, although prefer to find a certified Prius or hybrid mechanic at an independent shop.
View 3 Replies
The topic is as much as I can say to what my car's problem is.
2010 Prius II with 50k miles now.
View 19 Replies
2004 Jetta GLI V6 24v 6 speed ... This started a few years ago, but it was happening in 3rd gear only -- therefore I avoided engine braking in 3rd gear all along. The noise was a pretty loud, noticeable grinding/spinning noise. 3rd gear while accelerating or maintaining gas worked and still works perfectly, smooth as can be.
Somewhat recently (6mo-1yr ago) all the other 5 gears started making this grinding noise, some more than others. 1st gear I don't really know because I don't engine brake in 1st. However, 2nd, 3rd, 4th, 5th and 6th (barely noticeable but still there) all make the noise. I now of course avoid all engine braking, however even the transitional steps between gears can be heard sometimes ... unless I perfectly match the RPM etc, but I'm just trying to get to work and back here ...
The car is still quite drivable, but with a major obstacle (pain in the ass) and a new clutch is probably around the corner -- I have 107K on it now. However ... a few years ago when it had 26K on it .. it didn't need a new clutch yet 3rd was still making that noise.
View 17 Replies
I purchased (2/17/16) a 2009 Toyota Prius with roughly 73,000 miles. I have recently (the past 4-5 days, except the brake issue that occurred a couple of weeks ago) encountered a number of issues. The issues occur intermittently.
First, while braking, usually when it's raining or damp outside, I might hear a grinding sound like grains between the pad & rotor. Or, the car will be gliding to a stop then at about the 4-6 mph range the brakes will grab and the car comes to a complete and abrupt stop.
Second, while idling in 'P' the engine will engage and the car will shift forward about an 1-2" then roll back (as if bucking). My foot is off the brake pedal. I have the sensation that the car is going to drive itself.
View 6 Replies
Ever since I had my Prius in the dealership for the most recent brake recall I noticed a noise (which is hard to describe, something like a muffled clicking) when turning and braking at low speed. If I let my foot off the brake the noise seems to go away. This seems to be happening on both left and right turns.
View 19 Replies
My Prius c has always made a high speed whirling noise when braking but now at speeds of 42 to 46 MPH this high speed whirling noise is there and when you are just coasting have a noisy transmission or is this something I should be getting to the dealer with.
EVCT transmission noise ....
View 7 Replies
My 2007 Prius brakes extremely hard at low speed (while I am applying the same amount of pressure). While decelerating, I let the regen braking do most of the work until I get to about 10mph, then I press the brake so I will have equal pressure until I stop. When I get to about 5mph I feel almost a lunge where the brakes aren't working as hard and then the brakes take hold extremely hard. My prius has been doing this for awhile not depending on the weather, but I finally noticed it worse than normal yesterday when it was raining and my car braked hard and actually skid and the traction control light came on.
View 19 Replies
I have determined that I most likely have a bad CV joint - a faint clicking sound while braking that varies with speed that happens with the car in drive, but not in neutral.
I've also found instructions here on how to remove/replace the axle, but I'm wondering if it can be done without separating the tie rod end and removing the ball joint. On other cars I've managed to do this by unbolting the strut, which allowed the hub assembly to flop out enough to be able to slide the axle out of it. Is this possible on the Prius? I have to replace my struts anyway so I was hoping to do it all at once and avoid dealing with potentially frozen suspension components.
View 7 Replies
Every time I go over a speed bump, I hear a very noticeable grinding noise as the tire goes up it sounds grindy and as it goes down it sounds grindy front driver side area. Took it to a dealer and they said there is no problem. Therefore, should I just forget about it until there is a problem? It doesn't affect function, but I do hear it going over speed bumps and not regular shallow bumps.
View 4 Replies
I recently purchased a brand new 2013 Hyundai Elantra and I have noticed that I sometimes when I brake fast but not fully slamming on them from going about 60-80km I hear a loud grinding noise. When this happens the roads are dry so I know that it is not caused by slippery or wet roads.
View 279 Replies
I commute 180 miles a day, 6 days a week. I noticed metal on metal grinding noise(more noticeable) at high speed above 75mph especially on asphalt road. I'm sure noise is there at low speed but not enough to notice. My car has 50,000 miles. Tires? Electric motor?
View 7 Replies
Quick back story, bought the car a year ago, seller told me it was in an accident and the radiator was replaced. He let me know that the discharge AC hose was missing and that the other hose was disconnected. I also noticed that the low pressure cap is missing. I recently ordered and installed the discharge hose with the intention of filling the system later.
I have always noticed a noise/vibration coming from the passenger side when braking at low speeds. I havent noticed at higher speeds but maybe there is more road noise. The best I can describe the noise is that is sounds like a compressor running. I have a hunch it's the AC compressor and might be related to the regenerative braking, but I am no expert.
View 5 Replies
I just had new pads(ceramics, not sure of the brand) all around and new front rotors installed from a local shop that I trust. When braking while cold, there is a grinding sound and feel, I took the car back to the shop, they've acknowledged the issue, double checked their work, and are willing to replace the pads if it continues, which it has. Is there a break in period for ceramics, should I specify a different type of pad.
View 2 Replies
My car is making metal grinding noise when coming to a slow stop when you are stuck on traffic or going into your driveway. You can hear the sound and feel the sound.
I had this issue a year go and i took it to the dealer and they told me that i need to replace my rotors and my front brake pads.
A year later the noise came back and they told me that i need to replace my pads. I replaced my front break pads and a month later the noise is back. I went back and checked my pads and the pads were still new.
I only hear the sound when braking after driving in a heavy traffic or on a stop and go traffic. I don't hear the sound when i start to drive or driving in a non traffic condition.
View 24 Replies
I have an 06 Prius that I have had for about a year or more now. When I bought it, it needed a transaxle. I replaced that and have been driving it since. I have this problem that seems to be getting worse. When I push the brakes the car will make a popping noise, and it seems to be getting more frequent. I do not get any noticeable noises when turning or just driving normally.
The noise is quite noticeable, when I am in a parking lot and hit the brakes next to someone, people will give me the look like "what's wrong with your car". I am not positive where this noise is coming from, but my best guess is that it is coming from the right side. The popping seems like something is bound up and then releasing. I can also replicate the noise some times when I initially accelerate. My best guess is that it is being caused from the engine/trans weight shifting, but I am not sure a motor mount can make the popping noise I am getting.
View 4 Replies
