Prius (2004-09) :: 2007 - Wheel Bearings Are Loud?
Jan 8, 2015
My front wheel bearings on my 2007 Prius are loud. I think its the drivers side. Where can I buy prius OEM parts online and part #s?
View 4 RepliesMy front wheel bearings on my 2007 Prius are loud. I think its the drivers side. Where can I buy prius OEM parts online and part #s?
View 4 RepliesMy 2005 Prius has 95k miles on it. I've been hearing a cluck-cluck-cluck noise from near the front driver side wheel. I had an independent mechanic test drive it, who said the wheel bearing needs replacement. Should I have it checked out by a Toyota dealer? They're so much more expensive, but are is it worth taking it to them?
View 15 RepliesAs the weather got hotter, I have started to drive with my windows half-down when driving through city for short distances, otherwise I use AC. What I noticed about one month ago was the noise coming from the wheels when going over bumps. It is really annoying and sounds like when you shake metal balls in a pocket.
Firstly I thought that it was coming from the brake calipers, so I replaced all the shims (actually, I have replaced rotors and pads also as they were pretty rusty and I got a good price on them). However, the noise is still there. Yesterday I got my tires replaced for the summer ones and as I was checking afterwards if the bolts are tightened correctly, I noticed that if I shake the wheel (really hard) then I can replicate the noise. To have it summarized.
What I have tried already: Replaced rotors, pads and shims on every wheel and ensured that all of the bolts are tightened correctly. And I have also googled about this problem but every finding was about the shims not fitted correctly.
What are the symptoms: Strange metallic noise coming from the wheel (every) when going over road surfaces that are not perfectly flat and with windows down (when they are all up, I cannot hear anything). I can replicate the noise if I shake the wheel (with car on the ground).
I have taken video of the noise and hope you car hear it, but I think it is pretty noticeable. It sounds like the bolts are really loose but I have ensured 10 times that they are tightened and also as I wrote previously the noise is coming from every wheel. You cannot see it on the video but I'm filming with one hand and shaking the wheel with another (pretty hard), that's why the whole video is shaking.
Two different Subaru dealership repair shops told me that i have loose rear wheel bearings on my 2003 Outback. My car does sound like a VERY loud airplane all the time now, but the noise is the only symptom i have noticed. My shop has told me that they will fix it for a discounted price, but they are not pushing me to get it fixed, and have told me that it shouldn't cause any actual problems besides the loud noise being very annoying. All internet research to the contrary, though. I have to drive about 1000 miles round trip next month -- is it just going to be a noisy trip, or is something horrible going to happen if i don't get the bearings taken care of?
View 12 RepliesOur 2011 w/140,000 miles has a variable front end noise that I suspect from past experience with other vehicles is a bad wheel bearing. I've seen posts of the procedure for replacing the Gen 2 bearings that requires the hub and bearing be pressed out and new bearing back in which would limit the DIY'er, but looking at the replacement parts diagram for the Gen 3, it appears that the hub and bearing unit is bolted in with 4 bolts and may not need a hydraulic press to install.
View 4 RepliesI have been getting increased noise coming from the back of my car for the past month. So I jacked up the car and spun the tires and heard grinding noises in the rear right. I have a 2012 ToyotaPrius plug-in with 33,000 miles. When driving the car around 40 miles an hour there would be a howling sound coming from the back of the car regardless of the type of pavement I was driving on.
So I took it to the dealer today and they had it up on the rack in about an hour later they came to me and said it needed new tires and it would be about $700 and that this was likely causing the noise. I said that there was no way that it was the tires so I went and showed the mechanic how old the sound was coming out of the back right wheel. He listened with his stethoscope on the wheel bearings and said that he did hear some noise in there but still thought it was the tires.
I have a 05 Prius. Developed a low hum noise some time ago. It now is so loud can't hear the radio. Sounds like a heavy agressive truck tire rolling down the road. When turning the steering wheel from right to left quickly, noise level changes. Does this sound like a bad wheel bearing and if so what am I looking at for repair costs?
View 5 RepliesI gotta a roaring noise coming from my right front while turning. Planning on replacing just the wheel bearings tomorrow & not the whole hub assembly(2008 2wd). Is there a thread that lays out the steps and other parts I may need? I've seen alot different stories on the net on how to do it. Everthing from I can press new bearings to I have to do 4x4 hub conversion. Seems to be some confusion.
View 2 RepliesMy 2007 Prius II is starting to sound like a little roadster - when I was driving on the freeway behind a large car I thought it was them, or just hoped we braked and hit the accelerator at the same time thinking it couldn't be my car.
Only after that car left did I realize it really was my usually-ninja car making the loud purrs. It cruises quietly and the sound goes away, it's hitting the gas that makes it loud. The mileage is the same, it feels the same, it's just loud now.
Started the car the other day and a loud whining noise followed by the car "jumping" when I stepped on the gas. It would go/stop for a second, then shut down. Mechanic who is not a Prius expert said it was the tranny. He could put in a used one (77k miles). Car has 250k miles on it. Is it worth it? Or should I just part it out. I'm worried about things like the battery going next.
View 8 RepliesI have a 010 Ford Flex. It has 36k miles and bought it a yr ago with 24k miles. I have had 2 or 3 wheel bearing replaced earlier this Summer and one of the replacements already went bad and was replaced yesterday. This makes the count 4 now.
I say 2 or 3 because they had to get 3 of them. I am not sure that they replaced 3 of the bearings or if two were replaced and one of the replacements were bad and had to be reordered. I smell inferior parts. Love the Flex but am afraid the bearings issue will reoccur.
2009 Honda Civic, 54k miles, new tires (<10k miles), loud roaring when driving. Tire dealer says wheel bearings on front left tire are going out. Should this be happening on this car? Drove a Toyota Camry for 14 years and never replaced wheel bearings.
View 9 RepliesMy wife's car is an '05 Camry SE, V-6, 60K miles. Just recently, I start to hear a roaring sound starting about 35-40 mph. It sounds like a rear wheel bearing. I jacked up the front end and ran the car in drive, but did not hear anything unusual. I jacked up the rear and shook the wheels in and out and did not notice any play or wobble. I drove about 45-50 on a straight road and swerved gently from right to left and vice versa, but could not determine where the sound is coming from. How do I narrow my inspection to determine if it is a wheel bearing, and which bearing is bad?
View 11 RepliesAfter my Chevy Prizm took its rightful place at the junkyard two months ago (transmission failure on a car with a bad engine and suspension problems is, and should be, fatal), I got a 2008 Honda Civic to replace it. I had it checked out before buying by my mechanic, and I've driven it a few thousand miles without many issues. It had just under 42K on it when I bought it (former lease bought at new car dealer sale by the local place I bought it from), has just over 46K now, and has new Bridgestone tires on it that my mechanic says are worth $700-800. (I don't know exactly what kind they are, which is why I include that bit of pricing info.)
Last week I noticed that a sound I'd been hearing intermittently (to the point where I wondered if I was imagining it) became steady and consistent at 60mph. It's a "hooooooooo" sound, very resonant, and it's driving me crazy. It's gotten louder and louder, and it's now happening around 30 mph and above. It's been consistent since last Friday and getting worse every day.
Underneath that sound is the soft drone of what I assume is a wheel bearing going bad, which is still intermittent and has only started in the last few days. This is what causes me to believe what my mechanic said yesterday, which is that one of the front wheel bearings needs replacing. He also said I could wait until the sound "gets louder" before replacing the bearing -- I assume he means only the droning sound, not the resonant hooting that I hear every time I get onto a main road now. Because I believe the resonant sound COULD get louder, but I don't see how a person could keep driving under those conditions without actually going insane.
I scheduled the car to go in tomorrow to have that bearing fixed (for between $300-500, he said, which seems really pricey to me). But I'd like to know whether this is likely to solve the resonant "hoooooo" sound as well as the "wow wow wow" sounds that I associate specifically with a bad wheel bearing. My mechanics checked the suspension and rotated the tires yesterday while doing an oil change, too, and said everything looks tight and good, and the tire rotation had no effect on the sound I'm hearing, which is strongest from the driver's side front and is, again, louder every day.
(I know Civics aren't supposed to be great on road noise, but the fact that this has clearly gotten measurably worse over only a few days makes me feel its definitely mechanical and not just the usual ambient highway noise.)
1984 K2500 4WD 8-lug
Front DS wheel hub. The front wheel bearing nuts come loose all the time. I have to check it every weekend, usually starts to get loose after a week and I have to pull apart the hub and re-tighten the nuts. Bearings are all okay, but tires wobble when they get loose...
Reverse order of install: nut -> keyed washer -> nut -> washer -> snap ring -> 4wd auto engaging assembly -> spring seat -> cap seal -> spring -> cap
My understanding is the deepest nut gets adjusted so that the bearing is tight enough that nothing wobbles but not so tight the wheel can't freely spin. Then the keyed spacer goes in and the second nut is tightened down hard to lock the first nut in position.
I've had on-and-off issues with the front DS in general as well. That side the brake caliper always start to suck in air after a few months, on #4 now. Brake system has been replaced with rebuilt MC & calipers, all new lines and warning switch. Also the 4WD doesn't seem to lock in on that hub every time. It will engage, but doesn't hold if it gets too much torque. Then other times it engages and locks and won't have any problems until next time I want to use it. It works about 70% of the time. I've taken it apart and checked everything, no burrs or wear that I've noticed to cause it.
I just got a new Sonata and I find the car has a noise like bad wheel bearings in front, it sounds like driving on really rough pavement.. I have changed the tires and still get this..
View 1 RepliesI drive a 2006 Volvo V50 with 65k. Recently the car started making a noise and the dealership told me that I need new front wheel hubs because my bearings are shot. The car has always been well within the weight limit, has never been through deep water (we do line in the pac NW so there is a decent amount of rain), and has had complete service at all of the maintenance times. I think that under 125k bearings should not be giving out and that volvo should replace the bearings for free - the mechanic is telling me that there is no set time for bearings to wear out - it can happen at literally any time/mileage/age and it would not be the company's fault. Who is correct?
View 10 RepliesI THINK my wheel bearings are going on my 2003 Nissan Altima. It has about 95k miles on it and it has been making what I would call a mid-toned rumble or a low pitched rattle (imagine shaking a metal box full of rocks). The noise is coming from the front driver's side. It's more subdued when driving in really wet weather. I am more aware of it when I drive at slower speeds. It doesn't seem to change when I turn the wheel either way, and it definitely gets more pronounced when I go over a bump or a rough patch. I recently had my front rotors and pads replaced, naiively hoped that might fix it - wishful thinking - and stupidly forgot to ask my mechanic about it then. I need to call to schedule a repair, but I would like to be prepared and to know if anything else might make this noise. (and I don't want to jack it up and shake the wheel or anything).Approximately how much does it cost to have this fixed?
View 3 RepliesReplacing front wheel bearings on my 99 Passat? There is a gentle 'wahwahwah' grumble at speeds over 40mph. The car has done 130,000 miles and is otherwise in nice condition.
View 3 RepliesIn 30 years of wrenching on cars, I've never encountered this problem. Replaced the pads and left rotor. Rotor is typical Chinese rotor. While there, replaced the wheel bearings. Also knocked out the races (with a brass drift) and replaced the races with the ones that came with the new wheel bearings. The bearings are NAPA bearings. Packed the wheel bearings just like always.
Applied some grease just like always on the spindle. Put it all back together. Tightened the wheel bearing nut while rotating the rotor in the opposite direction. Went to maybe 10 ft lbs. Backed the nut off, set it firm finger tight. Installed the cotter pin. Got a whole bunch of sloppiness in the wheel bearings. I can feel a LOT of it when rotating from the 6 o clock and 12 o clock position. What did I miss? NEVER had this happen before. 2002 f 150 2wd
looking to replace the front wheel bearings on my 06 Mountaineer. Detroit Axle? I found them on both ebay and amazon and prices almost seem too good to be true (under $100, 12 month warranty).
View 6 Replies