Prius (2004-09) :: 2007 - Passenger Airbag And Seat Belt Buzzer / Light Not Working
Mar 26, 2014
I just bought a prius 2007.
I have a unique situation:
•No passenger: light is "Airbag" - No red flashing seat belt sign
•Passenger with seat belt: light is "Airbag" - No red flashing seat belt sign
•Passenger with no seat belt: light is "Airbag" - No red flashing seat belt sign
I have no other warning lights on the dash.
I tried to check to check if there are any loose wires/connectors under the passenger seat but everthing looks ok.
Is there a blown fuse?
View 7 Replies
Advertisement
About 6 weeks ago my 2004 4.6 scab had a glitch in that when you got going the seat belt warning chimes came on, to clear it stop at the next junction turn off re start and away you go. Now today its moved a step further on, the airbag not working light flashes and then stops on, but no seat belt chimes?
View 2 Replies
I just sold my 2006 GS430 to pick up a 2007 LS460. So far I have no complaints.
First off: I am NOT condoning driving without a seatbelt. Merely asking a question.
In my gs430 I can go through a series of commands to disable the seat belt buzzer from beeping while i drive without a seat belt. I've browsed the forums and haven't seemed to find the same thing for the LS460.
Is it even possible it to disable it without having the dealer reprogram?
View 10 Replies
I noticed the passenger side on/off switch for the airbag doesn't illuminate anymore on my 98 Ranger. Whether I turn the key on the switch to on or off it doesn't illuminate either way. The airbag light on the dash flashes showing, counting a code 27 and then it stays on. I also noticed the seat belts on symbol doesn't illuminate and in the owner's manual it says it should illuminate and chime. I remember it use to illuminate but I don't remember a chime.
Someone with a 98 that has a seat belt reminder light that illuminates and chimes until you fasten the seat belt? I don't know if that and the airbag code is related. But I want to fix both? I guess the simplest one to tackle first would be the seat belt light/chime. I don't see a fuse for it. I guess I need to know first is it really suppose to chime.
View 12 Replies
I was able to shut down the very annoying seat belt buzzer on my three 2008 Prius taxi's but when I tried on my 2010 Prius tonight it didn't work. I have done some searches on this forum and haven't found any solutions.
Just imagine the pleasure on a busy day of having 30 to 40 calls or more and most people not putting their belt on. Not looking forward to having to listen to the annoying seat belt buzzer/bell whatever you want to call it.
View 17 Replies
I recently noticed that when my girlfriend sits in the front passenger seat the light will randomly indicate that the passenger airbag is off. I took it to the dealership, they ordered me a new light to see if that is the problem.
Its really weird, she will be sitting in the same position for over a hour sometimes and then it will suddenly say that her airbag is off. the dealer said they tested the seat switch and it was working properly.
I will be bringing it in this week sometime and we will see what they say about the light. For now I have decided to take a picture/video everytime it happens to document it.
View 23 Replies
A few weeks ago, a relative was riding in the front passenger seat and asked me why the light said "passenger airbag off." I had seen that on before and didn't think anything more about it as I rarely have a passenger. Called Toyota to login the problem as I was traveling that week and thought I would be out of warranty before I could get it to the dealer. That particular light was on for some days afterwards and then I forgot about it. Tonight I noticed that "passenger airbag off" is not lit, but there is a light saying "airbag off."
I turned the car on and sat in the passenger seat, and the light that came on for my aunt didn't come on. Just "airbag off."
View 7 Replies
How to disable the seat belt warning sound and or the passenger side airbag warning sound?
View 7 Replies
I have a Sonata 2008 4 cyl. I started getting Airbag and passenger seat-belt signs blinking. Whenever a passengers seats the seat-belt light does not blink, but airbag warning on my dashboard is still turned on. I went to the dealer and they told me to replace the cushion for the passenger.
View 19 Replies
The "airbag on" indicator light on the dash in front of the passenger seat is lit whenever an adult (haven't driven with a child yet) is in the seat. My passenger (wife) finds the light obnoxious to have to look at, and I can't blame her. The customization section of the user manual doesn't seem to address this
View 18 Replies
Ok. So I purchased my 2009 Prius on Saturday (4/23/2016). Couldn't be happier. I have a couple of things that I need to get to right away including a very small crack on the front windshield and the slide mechanism on the drivers side. I am a small guy and the seat belt currently goes across my lower neck (not a good thing). Now the passenger side will allow for the adjustment of the seatbelt height by sliding up and down but the drivers side won't budge. The seat belt itself works fine, just not the adjustment for changing the height.
View 4 Replies
I had posted about it earlier [URL] ... but now the car has been to the dealer and was told it was the passenger side seat belt buckle.
View 13 Replies
Well, no wiring mod is required. Here is the procedure:
1. Set the LCD on the combination meter to the ODO trip.
2. Press and hold the TRIP meter reset knob for ten seconds or more within six seconds of turning the ignition switch to the ON position. Fastening the driver's seat belt while holding the knob cancels the buzzer reminder. (You may have to hit the reset meter knob to cycle through b-ON to b-OFF)
3. When this occurs, the LCD displays "b-OFF". The buzzer reminder can be switched between ON and OFF each time the TRIP meter knob is pressed. The LCD displays "b-ON" or "b-OFF" according to the buzzer reminder ON/OFF status. The display changes to the ODO or trip meter if the knob is not pressed in 10 seconds.
4) Performing steps 1) and 2) again when the buzzer reminder is off exits cancel mode.
I was able to disable the seat buzzer and took a drive. IT WORKs! I am so relieved.
View 14 Replies
I have a 2007 Toyota Camry LE, and the seat belt light keeps on flashing and the airbag light is solid. We have tried literally everything possible, tried replacing the seat, replaced the seats sensors, tried a airbag module out of another 07 camry with exact same part #. Toyota have diagnosed that all the systems for airbag is fine, except it has something to do with the seat belt of the drivers side/or module but all that's been checked and still no luck. My car is due for Safety inspecting coming month and need this to fixed. How to handle this. Btw light came on because we had a blown fuse for the drivers power seat, and my mechanic thought that it was the motor so we replaced the seat and noticed that it wasn't the motor. Was just the fuse and we put back the original seat and everything is functional except the lights came on. No accidents on it to the extent i know. and the wiring is all plugged back properly without anything like wiring damage.
View 9 Replies
I have a 2003 Montana which has the airbag light illuminated. Also no matter if the seat belt is locked in or not - no seat belt light ever comes on. I have a code scanner but it doesn't scan airbag codes.
View 4 Replies
For a long time my 2004 regular cab truck has a quirk that both the driver (and passenger if present) must click their seat belts before starting the truck. If not, the seat belt chime and light flash, even though the seat belt light is off when the alarm is not sounding.
Even if the truck is in park, and the passenger gets out of the truck and back again with the engine running, once in drive it will start the seat belt alarm with everybody properly buckled.
A few months ago I was driving to work and the airbag light started to flash.
I took the truck in for the air bag wiring harness recall, and the airbag light did not flash since then, and for a little while the seatbelt problem went away.
1 month later the seat belt quirk was back again.
This past weekend the 5x5 air bag alert started. I checked previous posts, and confirmed that my air bag light does not ever light on my dash. I don't remember if it ever came on once the recall was "fixed".
My gut feel is that the wiring to the light is fine, and that this is a wiring problem in the harness. I saw a post that made a vague reference to the air bag sensor under the center console and the seat belt circuit and could find no more.
Looking for a wiring diagram? If the airbag light is out, does the 5x5 alert supposed to indicate that the bulb is burned out, or that the bulb is out AND there is an airbag fault?
View 9 Replies
I recently bought a 2003 Ford Ranger. What I want to do is unhook the seat belt chime. In the past with the other 3 Rangers I owned I unplugged it from under the seat. But when I unplugged this one the light for the air bag stayed on. I like the freedom to choose and I don't care for the chime.
View 14 Replies
Airbag light came on the other day while out on an errand. Take it to work and pull the codes. I got a low voltage code and a driver seat belt buckle code "00059" maybe I'm trying to recall but unsure. I have a pair of seat belt buckles out of a mk5 Jetta. Do these will plug into my mk4 by chance?
View 2 Replies
My 2007 airbag sensor does not respond to a weight of 20 pounds or more, it continues to read "off". The dealer said the problem is in the female end of the seat belt; however, the seat belt sensor works perfectly. It sounds like the wrong diagnosis to me.
View 6 Replies
I have an 09 Accord (LX), one day the airbag light (SRS indicator) on the dash would stay on when driving, and the Seatbelt Reminder Indicator would detect the driver's seatbelt isn't engaged, even when it is.
A day later, the seatbelt indicator resumed normal operation, but the SRS light still remained on. I took it to two separate dealers and neither of them could connect to the SRS Control Unit to pull error codes from the onboard computer. They say I need to replace the SRS Control Unit to even begin troubleshooting this problem.
Can I replace my own SRS unit without accidentally triggering my airbags? Where do I order it? How do I make sure it is the correct part? Is it easy? Or I have a separate problem?
View 8 Replies
I noticed today in my new to me 2007 that the dash is lifted a little where the airbag is on the passenger side. Should I be concerned?
View 12 Replies
