I noticed a knocking sound from my 1996 Plymouth Neon when I hit some bumps. Poked my head underneath and see what appears to be the strut loose inside the spring. I am afraid that the "Damper Shaft Nut" came undone somehow? If so, how do I remove the quick-strut? Is the spring in danger of being sprung?
View 7 RepliesI have a 96 Plymouth voyager my husband was driving it to work and he heard a knocking sound he pulled into a gas station where he put oil in it and had to fill up on gas when he went to turn it back on it wouldn't crank over didn't even. Make a sound like it was trying to crank I know I am due for a oil change but im not that much over..
View 10 RepliesI have a 1996 Plymouth Breeze and its been a pretty trustworthy car for the last few years. Lately however I have noticed a gurgling sound coming from the coolant reservoir whenever it the thermostat gauge hits about 50%. It cools right back down to a little over 25% and the sound goes away. I don't think its a leak in my head gasket as there is not any oil in my coolant or coolant in my oil, and its not over heating.
View 10 RepliesI've only owned my neon for 3 weeks. I have a loud knocking/clunking noise and it feels like the rear is trying to freeze up in reverse it knocks/clunks louder when i brake in reverse. Sometimes it will knock/clunk and feel like something is trying freeze up in normal forward driving (maybe one of twice every few days) but it happens every single time i reverse.
We have already replaced the rear struts as we thought this was the problem.
I'm getting frustrated I need a good car to drive my child to school and I afraid to drive this one but I don't have much of a choice. It has had a lot of recent work by the previous owner (my brother-in-law) including a new clutch, exhaust, tie rods, new brakes all around and brand new tires so i'd like to fix it because it's in great shape and runs well for it age.
Another piece of information that may be relevant is the car sat for roughly a year and half with no use but was regularly started although I don't think they moved it. I'm wondering if it could have something to do with the brakes?
The problem starting roughly 3 days after I bought the car I don't drive much but would like to fix this so we can take it on longer trips as it's the only vehicle we own that fits everyone in it. Our secondary is a 2 seater Toyota pickup for my husband to commute to work in and there's 3 of us so the car being in the condition it's in doesn't work for us.
I have a 2000 neon, a knocking sound has started only when I get on the gas a bit harder than normal from a dead stop. It seems to last only a few seconds knock knock really fast and then its gone, does not sound like engine knock (rocker knock or persistent knock) more like a mechanical noise. Where to start ? Front breaks were done 4months ago, new rotors / pads / and 1 caliper ...
Seems it to be worse now....now starting to lean towards broken motor mount ... how to check or where to find them. Also now starting to hear while braking.
My neon has a leak that was diagnosed today as a rear main seal. I realize this is an expensive repair and am wondering two things:
1) Can I limp it along until next Spring by adding oil as needed?
2) Can try stop leak additives? If so, which one?
I have a 1998 plymouth neon that is leaking oil from the filler cap, I have replaced the cap 4 times and it still leaks from this same spot. What it might be?
View 4 RepliesI have a 2001 Plymouth neon and the coolant fan cuts on and off about every 30 seconds .
View 2 RepliesWhen I changed the alternator on my 2000 plymouth neon, I crossed the wires for the plug. Now the fuel pump fuse keeps blowing, when it turns over, which isn't often. I turn the key and nothing happens.
View 2 RepliesI have a 95 neon SOHC that drives with a very high Idle. Not all the time, but 85% of the time witch i find strange. This has been going on for the better part of a year and the car is almost undrivable. Its putting a hurting on my breaks for sure.
I had replaced the PCM 5 years ago. Replaced the timing belt 2 months ago. I have searched all around for vacuum leaks but am not able to find anything. I pulled the throttle body off and cleaned it very well. I replaced the IAC.
The car continues to idle out of control as if the IAC is wide open. The only way to get the car to idle correctly is to cover the idle hole in the throttle body 90% up with my finger. The guy at Auto Zone said if its not IAC or vacuum hoses, then I should start replacing sensors. How do I diagnose this problem?
I have a 1998 Plymouth Neon that will start after it has cooled completely, and be fine through out the day, but when I get home from school and I start it again, it makes a strange screeching noise, and after turning off the engine and trying to restart the car, the vehicle will not start again, but all of the lights work, the battery is fine, the alternator is okay, the starter is a brand new OEM part, new ignition coil, new spark plugs, new safety neutral switch, new speed sensor, new battery cables, new camshaft position sensor, the only extra thing it does have is fog lights that were not put in by the dealership, this was done when my uncle still owned this car back in 1999. The only other problem that it has is an Error code of P1899 (Safety/Neutral Switch Stuck) and at times when turning the steering wheel, it will make a screeching noise halfway turned until you let go a bit, and then it is able to completely be turned either way, and one last thing is that the speedometer was a bit erratic one time, while I was driving home on the freeway.
View 10 RepliesI have a 95 neon that is running a very high Idle. When you remove your foot off the break & gas it idles around 40 mph. Iv just replaced all the breaks and its melting the new ones already. I am receiving the following check Engine Codes: 12, 25, 32, 15. I have completed the following repairs:
1) replaced all vacuum lines.2) removed EGR Valve to clean, replaced all lines. No more engine code 32, however, now I am getting engine code: 12, 23, 25, 15.3) removed intake manifold to replace the PCV Valve as well as all hoses from the oil separator.4) replaced the IAC sensor5) used ohm meter to check all wiring from IAC to computer. no issues.6) replaced the TPC sensor7) used a ohm meter to check all wiring from the TPC to the computer. No issues.8) used a ohm meter to see if the air temperature sensor was working correctly. No issues9) checked wiring from Air temperature sensor to computer, no issues.
The car continues to idle extremely high to the point it is not safe to drive. By feeling the throttle body where the IAC lets in air, it feels like its comply open. I pulled the IAC out of the throttle body while it was plugged in and ground to the engine block. When you turn the car on you can see the IAC move, but it never seems to want to shut off air supply.
It appears the computer is telling it to let more air in even though its very high idle. I replaced the computer about 5 years ago. what would cause this?! Im to the point iv put in way too much time and money already. but I don't want to buy a new car when it could just be a $50 fix.
I just replaced the cv joint, the wheel bearings, and the tie rod end on my passenger front side hoping this would fix the problem. It fixed some of the issues but while driving straight when I go over bumps there is a muffled knocking sound coming from that area and my steering becomes loose and jerky. I'm just learning how to work on my cars on my own.
View 4 RepliesOk, ready for a new head scratcher? After replacing the starter, the battery cables, the camshaft position sensor, several hoses that were broken and/or disconnected, a wire for the transmission "forgot the name of it, but technically it was a cable with a piece of plastic that connected to the throttle", air filter, spark plugs, spark plug wires, battery temperature sensor, ignition coil, several missing fuses, I got a new code.
This code came up and I believe it is the same code that came up before, but I think it got masked by the battery temperature sensor and the "random cylinder misfire." It only appears when I reach speeds of 60 mph or above, the code is P1899 and when I took it to Autozone, Oreilly's, and Dick Poe Dodge, they were unable to figure out what the code meant.
I've just bought a 1996 celica GT. It has very low mileage and is in great general shape for it's age. There is one thing that annoys me and it's a clicking sound coming from the rear passenger side wheel when going over bumps (I hear it a low speeds as tire noise take over after I guess). I was wondering if I should be looking for different signs when I jack it up? Worn bushings? And is there a way to reproduce the sound. I've read about the rear bushing being a problem on these cars... is it true?
View 5 RepliesI have a 96 Plymouth Voyager with 230,000 miles that will quit running doesn't matter if I'm going slow through a parking lot or on the interstate. When going slow like backing up or through a parking lot I put it in P and restart it. Sometimes the engine light comes on, sometimes not. When traveling on road or interstate I mash on the gas and it restarts with turning the key. Some days it happens a lot, some days it doesn't happen at all.
I took to shop and they replace the MAP sensor but the next day it did it again. I took it back and they put replaced it thinking it was just a bad sensor. It still didn't fix the problem so I took to another shop and left it there for a week so they could drive it hoping that it would happen for them but apparently it not. They did replace the ground wire in the wiring harness but two days later it quit running again as I was rolling down the interstate.
I have a 1996 Dodge Neon 2.0 SOHC that was over heating. I told my daughter not to drive it until I could work on it and find and fix the problem. Well, we all know how kids are. She continued to drive it and it eventually it broke down. Now here's what I have done. I found that the water pump bearing went bad and that is why it was over heating. This also caused the timing belt to break.
I replaced the water pump and put a timing belt on it. I only have compression in two cylinders and it won't start. I followed the instructions for installing the timing belt from the book. I think they may be wrong. What I need to know is how exactly to set the crank and cam before I install the timing belt. Looking for step by step instructions on how to set the crank and cam and install the belt?
From the title post above, you can see that I have multiple issues with the car, or just maybe one causing all the symptoms. The initial problem is this.When the car starts, it starts up fine and has normal power. After driving for a few minutes, the car starts exhibiting the following symptoms.
1. If I step on the gas pedal hard and hold it, it sounds as if the car is drowning, the car loses power, then may back fire, then instantly, it regains power and accelerates. This is by keeping the pedal down.
2. If I feather the pedal, it doesn't lose power and accelerates decently but as soon as I begin to go up hill, it bogs down and does the drowning noise again.
3. I created a video showing this issue for my friend who typically familiar with these things. Here is the link ; [URL] .... In the video, the car is idling fine but when I throttle it, it begins to drown, then just picks up right away for no apparent reason.
4. Just two days ago, the car will not start after it's been running for a while. If I let it sit, it starts up again.
-Could my catalytic converter be bad and therefore it somehow creates back pressure after the car warms up?
-Would it be a fuel injection problem? I put fuel injection cleaner in the tank and it seemed to run a little better.
I replaced the crank shaft position sensor and it fixed everything. According to the Hanes Manual, the crank shaft position sensor is responsible for many things including timing etc. But one thing that caught my eye was that the car would run for a while, then stop completely and not run for a few hours or few days.
All seems good now. From the title post above, you can see that I have multiple issues with the car, or just maybe one causing all the symptoms.First, I am an American living in Norway and getting anything done around here costs an arm, a leg, and an extra pinky so I am going at this the maker way and trouble shooting my problems with the car.The initial problem is this.When the car starts, it starts up fine and has normal power. After driving for a few minutes, the car starts exhibiting the following symptoms.
1. If I step on the gas pedal hard and hold it, it sounds as if the car is drowning, the car loses power, then may back fire, then instantly, it regains power and accelerates. This is by keeping the pedal down.
2. If I feather the pedal, it doesn't lose power and accelerates decently but as soon as I begin to go up hill, it bogs down and does the drowning noise again.
3. I created a video showing this issue : [URL] .....
In the video, the car is idling fine but when I throttle it, it begins to drown, then just picks up right away for no apparent reason.4. Just two days ago, the car will not start after it's been running for a while. If I let it sit, it starts up again.
What it could be.
1. Could my catalytic converter be bad and therefore it somehow creates back pressure after the car warms up?
2. Would it be a fuel injection problem? I put fuel injection cleaner in the tank and it seemed to run a little better.
Turns out the crank shaft position sensor only fixed the cars ability to start and stop and did not cure the acceleration issue. What happens? The symptoms occur during the following conditions.
1. Hard acceleration
2. Going up hills
3. With heavy loads
Basically the car loses power and sounds like it is getting muffled. Then it just picks up rapidly and takes off.I have tested out the throttle position sensor and it checks out fine. The car never completely stops.If I feather the throttle, it picks up and keeps moving forward.
Haven't tried the EGR valve, fuel filter or fuel pump.
Strange thing though.The car was sitting for about two months until I replaced the crank shaft position sensor. Then it started up fine, and ran without problems.The tank went low, and I filled it with gas.AFter that, the car started having problems. The only thing I can think of is two things.
1. When I filled it up is raised sediment and somehow clogged something.
2. The excessive pressure in the tank is causing issues.
Why my 96 dodge neon is leaking coolant. I was checking my oil and I noticed the reservoir tank was half empty, so I assumed it was nothing out of the ordinary since it's a 17 year old car. When I filled it though, it came pouring out of the tube that sits right under the tank. I'm capping it off every day before I drive and it holds, but it's definitely got a slow leak. It seems to only hold it for 4 days of driving for an hour. My temperature gauge stays at the normal level, but you can smell the antifreeze burning and the engine's running hot. I'm not too mechanically inclined, but what could be wrong with it? I've recently installed a new alternator and clutch cable and found out my valve cover gasket is leaking. I really want to save this car instead of getting a new one.
View 2 Replies