I've been thinking about leaving the wipers in "service" position overnight when it's snowing or freezing rain. I'm wondering if I can go and start the engine and get the defroster going - or - will the wipers try to go back to their "parked" position as soon as I turn on the ignition? Not a fun thing if they are frozen to the glass...
View 15 RepliesThe other day, I had the wipers going, every time when they went back down to the "rest" position, they made this weird movement with loud noises, JUST want to make sure that it is normal, seeking some feedback before going to the dealer.
View 14 RepliesI recently purchased a '09 LS460 SWB. I noticed the driver side windshield wiper arm sitting up high enough to be in my field of vision.
I'm aware that there is a "winter mode" that allows you to raise the arm up a few inches, but from everything I've read....usually the driver and passenger side arm raise together.
In my case, my passenger side arm sits nice and low near the hood, while the dirver is sitting an inch or two higher.
I tried pushing the driver arm down (with success), but after cycling the windshield wipers once, the driver side arm goes back to the higher position.
MK7 So it rained for the first time since I bought the car. when pressing downward on the wiper lever it, the wiper arms began to shutter/jump when going back down to the rest position. When pressing up on the lever to just let them go on while driving I didn't experience this. Is this normal? She's only a week old.
View 16 RepliesHow to enable the options within settings to allow me to position the wipers straight up so I can change them. The option is greyed out, no matter what the car is doing (get a message telling me I can't do that when the car is moving, even when I'm in Park with the engine off)...
View 14 RepliesI drive a 2002 Opel Corsa and am completely clueless when it comes to anything beyond changing oil and tires...
My windshield wipers have suddenly begun to stop their movement in the top position instead of at the bottom, thereby getting in the way of driving. The wiping function still works perfectly, so it doesn't seem to be a motor issue. The wipers just stop in the wrong position when turned off.
I happened to be at the garage for something else, and the guy there said that he would just have to replace the motor, but to try to to find a used part somewhere so that it wouldn't cost a lot. I think it seems silly to replace the motor for something that seems simple.
How to reset the default of the wipers? Is there a way to just remove the blades and change the position or something?
2015 F250 and I'd like to have the wipers stop a little higher on the windshield causing the ice build up. Previous trucks I could pop the wipers off and rotate them and put back on. These are keyed so I can't. Any trick?
View 5 RepliesI finally had enough of the annoying squeak-squeak-squeak of my wiper blades every time I used them. Time for a fix!
First, I narrowed down the problem by making sure it was not the rubber wiper blade rubbing against the windshield. You can rule this out by simply lifting the wiper arms up to the locked position and turning them on. If they still squeak it’s not the rubber rubbing against the glass.
By carefully listening I narrowed down the squeak to be coming from under the large black plastic cover on the passenger side wiper. From what I have read other Gen II Prius owners have had this same problem. I discovered that you CANNOT remove that cover without removing the wiper arm assembly. But it’s not too hard.
My 2004 Prius has its wiper arms currently sitting a bit higher than they usually are, we originally purchased the car like this, it isn't a big issue, just annoying as the previous owner purposely used smaller wiper size so they don't obstruct the path and what not.
Anyhow, I want to replace the entire blade, but I want to buy the original size, thus adjusting the arms back to the normal position they are supposed to be in, how I can do this? From my understanding in other vehicles, there usually is a screw that you loosen up, and than adjust the arm as you wish, just not sure if this is the case with the Prius.
So it rained today. I go to turn on my wipers, and they sound like this: [URL].......................
Clattering and skipping, only for the driver side. So I go to look at the wipers, and they look fine. Put it into service mode, and driver side is not flush to windshield. Took off the windshield blade and saw that the piece that attaches the blade to the arm is crooked. And then there's a slight bend in the arm itself. Pictures show it not very obvious, but is noticeable in person. And there is a bend on both, but the driver side is much more bent than the passenger, and its also at a different angle, hence the crooked attaching piece.
I took delivery of a new 2004 Touareg V8 with nav system radio, yesterday. On the way home, in the rain, the front windshield wipers stopped working as well as sound from the radio (controls, menus, etc... were still illuminated) This is not very comforting. Windshield wipers are quite necessary in the rain. The general technology behind windshield wipers and radios would seem to be mature to the point that reliability need not be questioned. As a new owner having just been through an hour of instruction on operating this piece of machinery, I felt somewhat inadequate that I could not operate the windshield wipers and radio. I said to myself, it can't be this hard! My wife and I became frustrated at each other to the point of my speculation on who would get the vehicle in the divorce.
When I finally made my way into my driveway, I decided to check the wiper fuse because it was most necessary, rain being forecast for the next several days.
I pulled the 30A fuse for the wipers and found it to be OK. I then replaced it. Behold, both the wipers and radio began to work. (The manual does not say anything about the radio being connected to the wiper fuse) Case closed, I thought. 5 minutes later they went out again. I pulled the fuse, replaced it and eureka, they began to work again. I drove the vehicle today for about 30 minutes at which time they ceased to function once more.
My latest issue is not having wiper fluid shoot out of the dispenser units to the wipers. I think it may be frozen, but the weather has only gotten warmer since it worked last.
What's odd is that, even if frozen, I would think one side might work and the other would not, but neither works. I can hear the pump trying to squirt it out, but nothing.
I would rather fix it myself if I could. I have already taken the car to the dealership four times in the last month (steering rack 2X, catalytic converter, lower vent not working)....
I did top it off with fluid last night, but there was/is already plenty in there.
[IMG] ....
I have an 05 Touareg and the passenger side windshield wiper is not wiping a small section of the screen, approximately behind the rear view mirror. It's not a problem with the blade (I replaced those) so I suspect the wiper arm needs adjustment. Raising the car's bonnet reveals the wiper arm attachment (see picture) but there's a plastic cover that it looks like I need to remove. Usually I use brute force and break things like this. How to
(1) remove the plastic cover and
(2) adjust the wiper arm
I have a 2007 Toyota Camry. The wiper arm on the driver side is not moving while the one on the passenger side is working fine. I thought the wipers went bad and changed to new ones but the problem is still there. Is there something wrong with a motor?
View 3 RepliesThe clips on the cover broke so I bought a new one. Since they redesigned the 04 base, I have to remove the base. I remove the nut on the outside and the 3 on the on the inside after removing the cover. However I can't figure out how to pull the wiper off and replace the base. There is something holding it together. There is a pin that is connected to the inside that has a round hole but it is not a torx, allen, or any type of other tool I tried.
View 5 RepliesThe windshield wipers aren't working properly. I can hear the motor trying to work, and either blade will try to work but get stuck against each other. I checked the fuses and nothing is burned out. I'm not sure if it is related to the problem but yesterday my husband was washing the car and I noticed that he had pulled the wiper blades away from the windshield so they were sticking up in the air. We filled the wiper fluid. I'm wondering if something got broken when he opened the hood without putting the blades down? They seem out of sync. He also did an oil change. Could he have done something to cause this problem while doing the oil change?
I want to open up and take a look at the motor functions, but I'm not sure where it's located and how to get to it.
This morning on my way to work it was quite cold (~2 degrees F) and my car had some snow left on it from yesterday's snowstorm. I warmed the car up and had the rear defroster on.
When I went to use the rear wiper to clear some snow it got stuck in the down position and won't work. I tried manually clearing any snow and now the rear window is clear but the blade still won't move. I turned it on and off several times and nothing. I turned the car off and on again and still nothing.
Is it possible the motor is fried? This is a 2010 RX with ~68k miles.
I've got a 2003 Oldsmobile Alero that will not start.
The only thing that happens is when the key is in the ACC position the light "service engine soon" comes on. When I try to start it the light goes off and nothing happens at all. Now I've realized the lights don't work, power windows, radio or anything. This morning my keyless entry worked before getting in my car and trying to start it but now it doesn't. It seems like I've blown a fuse but I can't find any that look blown. I don't have a light meter to be 100% sure however.
The Prius that I bought brand new last October has developed a crack just above the driver's side windshield wiper. I noticed it today while washing the car. At that time it was about eight or nine inches long, and relatively hard to see due to being so low on the windshield. I inspected the crack very carefully and could not see ANY type of impact damage. After driving it around for the day, the crack has now splintered off and is going in a few different directions now. In a couple of places along the crack a few small chips have also broken off.
View 10 RepliesI'm setting up a 9v 20mA 5mm LED array for some DRLs, but I'm worrying a little too much about my power supply. I remember reading about a year ago to tap into the windshield wiper motor for a 12V source. I know I'll need to get some resistors for that.
View 1 RepliesFound that OEM new wipers were not completely squeegee-ing the windshield. i.e. getting small patches of wet/unwiped areas. Seems like it's skimming some areas instead of actually wiping.
View 24 Replies