Phaeton :: Transmission Pan Gasket Leak
Sep 23, 2010
As mentioned in one of my posts I recently had small oil leaks on my garage floor. I first thought that it came from the front dif, well, after having an oil change at the dealer it appeared that the tranny oil pan gasket is leaking, I was under the car with the tech and I saw it. It is a small leak the dealer wants to change the gasket and tranny fluids. Being under the car it seems to me that to remove the pan and replace the gasket is an easy job..I will look into the Benley tonight.
View 7 Replies
Advertisement
I had a very slow oil leak that dripped onto the garage floor and i brought it into the dealership. They said it was a leaking left valve cover gasket; I searched and came up with nothing? The engine has just over 30K miles on it.
View 20 Replies
It appears that I have a small tran. fluid leak. Local Toyota dealer quoted me a reasonably low amount (300 or so) to fix.
My mechanic however, disagrees and says that this is a major work as the leak appears to come from the read gasket right in the middle of the entire tranny. He said the tans. need to come out and apart.
The leak is minor. It was first spotted at least a month ago and I never had to add fluid. Currently its right on the hot mark when measured after driving.
I would like to believe that my mechanic is somehow wrong. I never had to deal with a transmission leak that requires such a major effort to fix (I am talking pos old GM, Honda, etc). It just sounds odd (but then I never had a leaky rack and pinion either except in this Camry).
It would be very frustrating having to drop another grand into this car. The mileage is less than 90.000 miles. Its an automatic 2005 4 cyl.
View 14 Replies
My 1987 Nissan Sentra has a transmission leak. The leak is from a bad gasket from the center part of the Trans. How to replace or fix this gasket without taking out the Trans. ( Just so we are clear-this is not the Trans pan)
View 9 Replies
I replaced the filter and gasket on my transmission about a month ago, it had a slight leak when I changed it, that appeared to be coming from the back side of the pan. So changed it and everything seemed good, today I noticed a small puddle of fluid under the truck after setting only a few minute's. Got home crawled under it and sure enough it was coming from the pan gasket again, now last time when I replaced it. I put a small amount of Permatex on the gasket back there, but it is still leaking there.
I checked when i had it apart the other day for a crack or anything noticeable but figured it was just the gasket was bad ( was a cork type gasket). Its hard to get the pan in there between the cross member and the transmission so I am not sure if i scrapped the permatex off or not, I am gonna take it all back apart and check it again and put a new gasket in and put the permatex under the gasket and on the transmission then hope for the best... 97 4.6 4x4
View 8 Replies
I've never had a drop of fluid leak from my transmission until yesterday. I towed a very heavy trailer (10k or so with tons of tongue weight) about 300 miles and I got back and noticed a decent amount of fluid leaking. The transmission temperature never went over 160 on the drive. I know these transmissions tend to puke oil sometimes, but doesn't that only happen when they overheat, or would a very heavy trailer have the same symptom?
It appears the leak is coming from somewhere near the back of the pan around the gasket. More specifically, it seems the one bolt pictured below is leaking. All bolts are tight and the pan gasket was replaced about 6k ago with the last fluid flush.
View 14 Replies
Is this normal or do I have a leak? Noticed this white stuff just like what you would find on the coolant cap, as well as this red stuff too.
View 7 Replies
I recently discovered that I have a small leak due to the oil pan gasket beginning to tear. Due to my 2001 Ranger being a 4WD the quote to replace it is almost $1000 since I was told they have to lift the engine to do the job. I only lose an ounce or two a month it seems so I could just tolerate that unless someone knows a way I can safely plug the leak. It is actually pretty easy to access the leak as it is right in front of the pan as you face the engine from the front.
View 19 Replies
Have to do a replacement and if so.. is removed the intake the only way to get at those stubs on the ex manifolds.
I thought it was the flex-pipe.. but after listening to the sound and getting an engine code for b1 s1 the leak has to be before the o2 senor for it to pop a code..
It sounds like a standard header leak from backing out bolts or a faulty gasket leak..
View 4 Replies
My Subaru dealer just told me that my 2004 outback with 88k miles has developed a head gasket leak. I haven't noticed any symptoms, and the leak started sometime between now and my last major service 10k miles ago. How serious is this? They want to charge me for it? If so, when? Is disaster imminent?
View 7 Replies
I recently had my oil &filter changed on my 01 integra at the dealer and was told that my oil pan gasket has started to leak. Car has 180k on it, and has no engine leaks.Seems like steep price for the repair $340.00 for the oil pan gasket. Is this repair really worth doing on a 12yr old car or is this just a normal thing that happens w/ age. Also Oil is not leaking on the ground and has no leaks around the engine. Iam only adding 1qt. of oil every 3k.
View 17 Replies
2004 camry, oil pan gasket replacement required? Mine is leaking.
Was there anything difficult about it? Any special notes or tricks about replacing it? Seems like it would be a simple job.
View 5 Replies
so I have a 2azfe engine
So there's an oil leak coming from the valve cover gasket (just purchased vehicle dirt cheap with 220k)
found this
Notice all the oil sitting on top of the exhaust mani gasket
In the left(lower) part of the picture it appears to be scraped.
the gasket appears to be newer, I did NOT use a screw driver to remove the valve cover, which is what this appears to have been done..
Can this be sanded down then filled with jb weld, and then regasketed?
View 7 Replies
I have a 06' JGC with the 5.7L Hemi w/80k and about a month ago I noticed a little smoke under the hood after driving, I found an oil leak and it's running down the passenger side of the rear main seal but the leak is above the seal. I had the shop put die in it and they dont know for sure but they belive it is the head gasket. There is no water in the oil but they said that doesnt matter. Apparently the heads cant be resurfaced on hemi's but they have to be checked to make sure they are in spec.
View 2 Replies
I've got a coolant leak here (I wiped away some of it before taking the picture):
Close up
This is the only place I can find coolant leaking and it's running down all the way to the water pump:
When I wiped away from just below the valve cover gasket it flaked right off and it doesn't appear there is any oil mixed in. I changed the oil today and it didn't appear to have any coolant mixed in either.
The coolant doesn't appear to have any oil in it's nice and pink as it should be. I started the car from a cold start and sat and watched the area waiting for it to leak but nothing ever came out, of course.
I know there shouldn't be coolant leaking from this area anyways but I don't know how else to explain the trail pictured. I definitely have a small leak somewhere as I've found coolant on the floor of the garage before.
Do I just replace the valve cover gasket and move on or is there something else I should be concerned with here?
View 11 Replies
Have a 2000 Alero. Mechanic says oil on ground is from leaking head gasket. $3000 to repair, or buy rebuilt engine for about the same. I thought head gasket leaks were into the coolant, not outside. Is this legit, including the cost? Valve cover gaskets were replaced earlier this year. Should I get another opinion? Other possible sources of leak?
View 2 Replies
Was told my Sonata has a leak at the Timing Cover Gasket by two different service stations. Took it to the Hyundai Dealership and they said they would need to pull the engine out to fix it and it would take a couple of days. I read on a couple of other posts that people were able to replace the timing cover gasket themselves. So, I don't understand why the Dealership said the engine would need to be pulled, but I'm reading others say they fixed it without pulling the engine. Am I missing something...? I'd rather not have the engine pulled out if it doesn't need to be.
2008 Hyundai Sonata 2.4 L 2359 CC L4 DOHC 16 Valve.
View 4 Replies
I've been told that the 2002 Santa Fe that I drive has a small leak in the head gasket and that this will be a major problem for the A/C compressor in the not-too-distant future. Supposedly the compressor is located below where the leak is and that over time (5-6 months) this can/will cause the compressor to need to be replaced. Does this seem like a credible scenario?
View 2 Replies
I've been getting bad gas mileage for the past two years or so. I also get a fume smell when I run the car for a while. I have strong suspicion there might be a leak in one of the exhaust gaskets.
I'll be changing the exhaust manifold gasket and both exhaust flange gaskets. I'll also be changing both O2 sensors. The car runs well and smooth. It's just those two things.
View 6 Replies
I have 2012 R with 33,000.00 miles on it. During regular service they detected that I have a coolant leak. They replaced a flange and determined that there was actually a head gasket leak. This is very unusual for such a low mileage. The car is still under extended warranty and they are in the process of replacing the head gasket. They told me today that they have to machine the head since there was some residue due to the coolant leak. This is all done at a VW dealer service.
View 1 Replies
Replaced fuel pump which is fine now, but installed new lock ring and gasket and getting fuel seepage around the sending unit area.
The gasket that came with the fuel pump seems kind of thin to provide a good seal here.
View 3 Replies
