So after saying "We don't work on that model" when I asked for a timing belt / water pump change (yup, they actually said that), I went in today to try and get a second key made since the guy I bought the Phaeton from only had 1. I do not have the little code. I was told that there was nothing they could do without the code. My only hope would be to contact EVE directly.
View 2 Replies1987 Acura Integra AT with 158k... Water pump broke after 75k miles (in 18yr period)....
I am wondering what else should I have it done:
- thermostat
- oxygen sensor (is there one?)
- vacuum tubes (I hear that these fail due to age)
- anything else?
Are these near where they will be working on? Any other tips?
So I was getting my car flashed to stage 1 at a dealership here in the Chicago suburbs and there was CSG R in there with the timing belt shredded. Turns out water pump came apart, shreded the timing belt, and apparently the pistons smashed the valves. I got a call from my friend whos a mechanic and said another one is getting towed there today with the same issue. Both have between 2k and 3k miles on them.
View 24 RepliesHow to change the timing belt and water pump on a 2006 2.0t passat?
View 3 RepliesI replaced a timing belt and related parts on a v 6 atq motor and three weeks later there's a pretty good oil leak, where its from or if oil leak can be related to timing belt replacement... leak seems to be in same area as crank pulley but not sure...
View 2 RepliesI have a 2007 Accent with 119K on it.
I wanted to replace the water pump and I was wondering if this can be replaced without removing the timing belt or the lower timing belt cover?
A mechanic has my car and replaced my timing belt and water pump....he said he had it running and then it sputtered out and wont start..i have never had a problem with this car. Just replacing before it went out.. he is missing something.
View 19 RepliesI have a 2002 Audi A4 1.8T with 85,000 miles. Recently my car started overheating, I replaced the water pump, thermostat, and timing belt. The mechanic also ran tests to make sure there were no issues with the head gasket, those tests came back saying the head gasket was a-ok. Yet, my car is still overheating but only on days when the outside temperature creeps above 90 and I am in stop and go traffic. I have to re-fill the coolant tank about once a week depending on how much I drive. I find no coolant puddles under my car when it is parked, so I do not believe it is leaking. What else could be causing my car to overheat?
View 2 RepliesI have a 2002 Intrepid ES with a 3.5L V-6 with 264,000 miles on it. I have recently had the timing belt and water pump changed. Three weeks later I am driving home and the temperature gauge starts climbing. This is the first time this car has ever overheated. Well, I call my buddy who is a certified mechanic and he tows the car to his shop. I have him check the water pump to make sure it hasn't prematurely failed. He tears the front of the engine down and inspects the pump. He finds nothing wrong with the pump but he discovers the timing belt tensioner has failed and it has caused the engine to jump time, I tell him to go ahead and replace the tensioner.
After he put the engine back together he started it and it ran cool while it was sitting at idle for about 45 minutes. Then he took it for a test drive and it overheated again. He checks the thermostat and finds that it has also failed; he replaces that also, still overheating. New radiator hoses, upper and lower, new radiator, new thermostat, new water pump and it still overheats. He put dye into the coolant to check for a blown head gasket and it tested negative for a blown gasket. The exhaust doesn’t smell of burning coolant or producing white smoke. My mechanic friend and I both have run out of solutions…
I was driving my 2005 RX 330 (138k miles) North on I-75 through Atlanta in rush hour traffic when the car completely died in the left hand lane w/ no shoulder. GDOT stopped six lanes of traffic to push us up and over a couple of hundred yards to a right shoulder. It was determined that due to a coolant leak from the water pump the timing belt malfunctioned and shredded.
I had heard that the water pump should be replaced during the 90k maintenance when the timing belt is changed, but my water pump was not replaced according to my maintenance records. I understand from reading a couple of posts that this isn't always required but that they do check the water pump. Is this correct? And if so should they have noticed that there was a potential problem?
My audi runs great. Its has 170K miles on it. My mechanic replaced an air pump last Friday and by Monday I had a new issue. I noticed coolant leaking. I took it back to the mechanic who fixed the airpump to diagnose. He tells me that the leak is coming from the timing belt/water pump area and in order to get there it takes 7 hrs. He suspects that its the water pump or a cylinder block crack. He suspects it could be a water pump breakdown more than a block crack. A block crack could be a serious issue with the engine is what I suspect.
I think he did something wrong when he replaced the air pump. He tells me that these are in two different areas and that he canbe generous with his time in only diagnosis but not in fixing the problem. Do you think he is right ?
He recommends that when they open the timing belt cover its best to replace the belt, tensioners, water pump etc.. Now spending $ to get to know where the leak is sounds steep.
I had the timing belt, water pump and thermostat replaced on my '97 RAV4. The next morning while braking at a red light I heard a rapidly repeating sound that sounded like metal on metal. The car never made that sound again but now I'm hearing a noise coming from the passenger side of the engine (timing belt side). When the engine is cold I don't hear it. After driving a while its starts, then once the engine warms up it generally goes away (except for this morning which was the coldest morning since this started, temps in the 40s).
I was only hearing the noise when the car was stopped either in drive or reverse (reverse sounded louder) if I lightly let up on the brake pedal (there's no pulsing in the brake pedal). Once under way the sound goes away. This morning it was making the sound virtually every time I came to a stop (once the car warmed up) even with my foot firmly on the brake pedal. I recorded the sound Saturday while standing still with the car in drive and my foot slightly easing up on the brake pedal. The sound starts at the 20:30 mark, what it could be?
How to change belt on water pump on my 08 V6 the hayness says there is a tensioner on the v6 well i am stumped cant find it so ....... Belt is tight I see no way to get slack in belt to change it .top pulley and pump pulley is all i see...
View 11 RepliesI've got my sister's 1995 Dodge Neon with the 2.0L SOHC. While driving it recently I heard a horrible squeaking noise then a ZZZZZZzzzzzz sound. I immediately pulled over. The check engine light came on, and I shut the car off. Coolant was all over the place leading me to believe the water pump failed. I had it towed to my house, and now I will have it towed to the shop to get fixed. I would like to have them repair the timing belt and water pump. However, I am afraid that the valves were beaten to a pulp and now I will need a new engine. I was only going 35 mph when it happened. What are the odds that my valves were smashed up, and is there anything I can do to check them before I pay for a timing belt/water pump repair?
View 19 RepliesI was wondering if the timing belt on my 05 RX 330 needed to be changed due to age and not miles. The car only has 72k miles on it but it is 10 years old.
View 5 RepliesI just changed the timing belt and everything runs great. I pushed the AC button and no light came on. I checked all the fuses and they are good I took the H and L caps of and tapped the pin and there was air blasting out. Don't know what it could be? All I did was loosen the compressor and remove the belt and put it back on.
View 2 RepliesAfter timing belt change code P0016 with Check engine light trac off and VSC light on.
Put on the entire kit...timing belt,tensioner, idler, and water pump. When I took it apart to put the new cam crank sensor I inspected everything and all looked good.
Changed the sensor and reset code, a few hours later back on. Car seems to run fine. I didn't think the sensor was bad. Car was running great...just due for timing belt.
My dad changed the timing belt on my 99 CR-V in August and he had some trouble getting it in time (he had to tear down and put it back together 3 times!). Sometime after the timing belt/water pump/spark plug change, I noticed a vibration in the steering wheel while at a stop and a loss of MPG (went from getting 24 mpg to 22.7).
It did not happen immediately after the timing belt change (or at least i dont think it did) so i thought the mpg loss might be due to the changing weather and the vibration coming from a motor mount that i knew was broken, but I got the motor mount fixed and it did not do anything. I think that the vibration has gotten worse, but it seems to be at its worst when the car is really cold. (this morning the temp. was 9 degrees and it vibrated harder than it ever has).
The vibration only happens when the car is in park or at a stop, and it goes away when i accelerate, even if I only accelerate a little bit. I have not noticed a loss in power, or any sluggishness in acceleration. I have tried to research this, and I read something about the drive belt being out of time, but I'm not savvy with cars so I just don't know.
What could be the cause, do I HAVE to get it fixed, and what do you think a reasonable cost to repair is?
2002 galant 4cly overheating! So my Galant has 120k miles and I just had the timing belt replaced and I thought I'd be good and have the water pump replaced as well. When I got it back I made a few short trips with it and it was running fine then I took a longer trip about 30 miles and I noticed it was overheating, so I took it back to the shop they thought it was air in the cooling system so they preformed a few flushes, replaced the thermostat even though it was new and then replaced the pump again and the radiator cap, the radiator it's self was replaced maybe 1-2k miles ago. I don't believe the head is leaking since I'm not losing coolant and the oil isn't milky.....I'm at a loss, could the thermostat be the problem? Do I need one from the dealer? Is there a history with replacement pumps bad?
View 12 RepliesMy mechanic just did the timing bet, water pump and other belts. Also changed the tensioner.
Car runs fine and everything seems great until I get to a red light. The engine sounds louder then before. Not very loud but its louder and maybe a very slight vibration, not sure yet. No noises while driving, seems like its running the same or better then before. Runs fine though
I have a 2005 Toyota Camry with 120K miles that was bought used with 110K. The previous owner did not have the vehicle long and did not know if or when the timing belt had been replaced. I have read several blogs that recommend replacing the timing belt at 60 or 90K. To err on the conservative side I decided just to do it at 120K. Now my problem. Before the timing belt change there was a slight knocking from one of the cylinders. After the belt change the knocking is more pronounced. Q. How concerned should I be that the knocking is more noticeable? Could this be a by-product of the new belt and as it loosens the knocking will subside somewhat? OR, am I looking at valve job or worse?
View 8 Replies