I went to my dealer to tell them that I had the sensor light showing "check brake pads" after the normal service at 75000km I left the dealer and the same problem showed.
I returned and was told everything was fine with the pads but to fix the sensors was "not worth it".
A few days later the screen showed I had a flat tire and after trying everything it would not go away after resets etc etc..
If my check brake pads light came on a few days ago, how long do I have to get it to the dealer? Can it wait a few weeks? Months? Or, do I need to drive it straight there?
View 1 RepliesI have returned from abroad after 7 weeks, and my late 2004 Phaeton (3.2 Petrol) has taken a day to "power up" and for some warning icons to disappear. After two days, I have the "Check Brake Pads" warning on. It happened only an hour ago. My breaks feel okay. The car has done 28000 miles.
View 24 RepliesI have an '05 GLI @ 45,000/mi. The sensor light came on for my brake pads about a week ago. So obviously I need new brake pads (front & rear? not sure...I know the sensor is only for the front). But I was also wondering if I need to replace the rotors.
I understand there is a measurement for the OEM rotors to tell when they need to be replaced. There is a little lip on the them, more so on the front than back. And they feel slightly grooved.
I have the "check stop lamp" message showing up. Both right and left brake lights are fine but the third brake light is totally out. I've heard of other Volvos having issues with the wiring harness near the hinge.
View 8 RepliesI have a very annoying "check brake light" warning popping up in my dash with a small beep every time I brake. It seems that some of the LEDs are sometimes not illuminated but in a sort of varying configuration. Is this possibly a connector issue? (where are the wires coming from?)
Do I need to replace the LED-bar as a whole or can it be mended in subunits?
When I have to work on the light, do I REALLY have to remove the entire backseat and hatshelf (as WillemBal did to get rid of a fly that was stuck there!) or are there less invasive procedures that can be performed?
My Lexus was working fine till yesterday, but today when I started (button press) it, it started giving me a Check VSC error and Check engine light along with Slip Indicator started showing up
Took it to Autozone for the codes and got
P0015
P0304
C1201
B2799
I have a 2004 V6 with 20s and close to 32K miles, never driven off road. Last Friday this warning "Check brake pads" started to show sometimes. I believe the dealer changed them before, but if he did not, how much should it cost me to replace them?
View 11 RepliesMy is350 F sport tire pressure sensors. Well I have after market wheels with the stock tire pressure sensors, when they were first installed everything was fine, now about 2 months later now that it is a little cooler. My two back sensors are showing the warning light. it still reads the pressure and shows correct pressure but sensor warning light for both rear tires are on. Why this is? I was thinking the colder weather but why only the rear two and not the front. they go off and on but lately both have been on.
View 3 RepliesMy 2007 LS460L dash light shows VSC system check needed by dealer. What does this mean? When the warning comes, the cruise control and break-hold don't work.
View 3 RepliesSo my brake pads worn light came on recently on my 03 jetta...low and behold all 4 brake pads needed changing...funny though because upon buying pads with the sensor when I went to put new pads on the old ones didnt even have a sensor it was already cut at the harness and spliced together to keep the light off....so upon inspection one of the wires was black and the other copper....idk if one was supposed to be black or if its because its fried? Anyways i went as far up the wires as I could till they are harnessed in with the abs sensor wires...still one wire black....spliced together crimped and still the light comes and goes....I dont have access to the vcds or vagcom so can't turn it off that way..
View 2 RepliesSo a few days ago the warning light that my break pads are getting low came on. My friend needs a ride this weekend that would bring the round trip to about 300 miles. How soon are my break pads on my 20th going to be shot? I don't know if this is an early warning to let you plan to get break pads in the near future, or if it's the same thing as seeing the gas light(Oh crap, gotta head to the gas station and fix this NOW).
View 7 RepliesI have a 1999 Jeep Cherokee Sport with 140K + and recently had an oil change. I went on a 8 hr road trip split up between 2 days (there and back). On the way home I noticed my oil pressure gauge acting funny, going up and down but not past 40. Today, I drove home from work (10 miles or so) and the check engine light came on and the oil pressure gauge was very low, almost 0. I made it home but was very nervous and noticed both today and this weekend there was smell, burning or burned type smell. What should I do? I don't really trust the garage that changed the oil and was skeptical taking it there but was in a pinch.
View 12 RepliesI just changed brake pads front and rear. My light was on indicating need for such. After changing i figured light would reset and turn off. Not the case. How do i reset the light? Was there something i needed to do to sensor when pads changed?
View 5 RepliesI have a 2004 vw toureg 3.2l v6 and i have two questions. first is where are the brake pad sensors located in the pad or outside of the break pad? Second question is TPMS light is on due to a dead battery in one of the tires how do i kill the whole system?
View 1 RepliesOK, I just got back from having pads and rotors install on my '99 Passat. I was expecting this to clear up the brake and abs light problem but it did not. The brakes still feel mushy and the ABS light still comes on.What should I check? In the brake forum people suggested bleading the brakes, is this the next step? Any quick how to?
View 3 RepliesPut new pads on by 2006 Passat tonight. Disconnected the battery removed the calipers and used a 12 volt battery to retract the pbrake then pushed back the pistons. Buttoned everything up but when I started the car had the park brake fault light and car is now in limp mode (3rd gear only with harsh engagements.
Disconnected the battery again and will let it sit.
I was driving when the truck made a terrible noise and while pulling over the check engine light went on as well as low oil pressure. I turned off truck and checked but no evidence of any leakage at all. Checked oil stick and was dry. Let sit for an hour and checked oil stick to find about 1/2" showing. Added oil to find that now it was overfull, drained oil back and stick showed proper level. Attempted to drive and it was fine until I came to a stop wherein it would stall with "low oil pressure" showing and check engine light on. Brought to shop and they said engine is very gunked up, they said they could try oil flush but probably will not work. They most likely will have to remove the valve cover and such to physically look at engine and take it from there... (I have always used type of oil stated on the cap, used synthetic and changed every 5-7k miles - showed diagnostic codes p0011, p0340, p0345 and p0021).
View 14 RepliesI replace the frond brake pads. Press the piston caliper using a c- clamp. When my brake job is done, start the engine, pump the brake now the yellow light come on.
View 4 RepliesI have about 50,000 miles on my pads, they look 50% gone, but couple days ago I've got short "beep" and light yellow came on(circle with several small parts of larger circle). What and why? Rotors, pads, other?
View 4 RepliesI have a 2001 Chevrolet Prizm with check engine light showing PO420 and PO446 codes, what could be the problem?
View 1 Replies