What does it mean when the PRND2 area all illuminated at the same time? Normally only the gear selected will be illuminated, but yesteday I got a solid bar illuminating all the gear selections. Couldn't find any reference to it in the manual. Shut the car off and restarted and the problem went away.
View 24 RepliesI am Having a problem on my 2005 Phaeton which has a 3.2 engine. Last time I drove it was yesterday and had no problems. This morning, I'd turn the key and it give me various error message."Move selector lever to position P/N" ...
I tried to move it but with no luck , the message is still there and I also noticed that the light on the shift that indicates that I need to press on the break to start is not glowing. This is not the 1st time I had this error but before I had to leave it for a while and it will start ...
I really love my Phaeton and it has only 75,774 kilometres on , so it is quite new ...
You can see the error message and the light indication below in the pictures ....
Today when I head home I was getting the message "Move Selector Lever to Position P." It would come and go. No other lights or warning what so ever were lit. What this message was for and why it was displaying??
View 6 RepliesWhen I park my car and shift the selector into "P" the car will not allow me to remove the key until I jiggle the selector. I get a "please shift the selector into P"
After it's jiggled it unlocks, and I can then remove the key. I would prefer to fix it myself, rather than take it to the dealership.
I have a European Phaeton 3.2 litre V6 (gasoline) from 2003 that is giving me some problems. When I am finished driving I put the gear lever to parking position and turn off the ignition. I then get a message "Move selector lever to position p" and the key is stuck in the ignition.
So far, I have been able to get the error message away (and with that also been able to get the key out) by starting the car and move the gear lever around. Some times I have managed by only starting the system (by not holding my foot on the brake pedal). But tonight I couldn't get it fixed after numerous tries. I then simply waited in the car, because I didn't really know what to do, and after maybe five minutes the system shut down (energy saving mode?) and I could finally get the key out.
When I tried google the error message I found some topics about it on the Touareg forums, but they got the error message while driving and it had to do with the keyless system (which my car doesn't have).
What might be causing this problem? My local VW dealer is not very used to Phaetons (I am the only on in my town with one).
Twice today I have gotten a message to the effect that I should check my lights. I have forgotten the exact words. I checked the lights and they all seem to be working properly. Is this what people mean when they write that their lights are flickering?
View 2 RepliesOn my dash the prnds lights flash constantly. The car shifts fine and the paddle shifters work too.
View 2 RepliesPast couple of days I've had a warning pop up for "Check lights" sometimes even before i have turned them on although I do have arrive depart set to activate. On looking around all seem to be OK apart from maybe 2 leds within the tail lights. It does seem to go out within a couple of mins of actually setting off as well so clearly somethings sorting itself out.... What to check next? they seem to be working fine, I can see them autolevel when I pull up behind a car and the car settles on its suspension etc.
View 6 RepliesOne of my taillights stopped functioning last night on my drive home. The "check lights" message came up on screen, accompanied by a loud warning chime. However, it wouldn't stop. It kept flashing "check lights" over and over, and kept repeating the chime every few seconds for my entire ride home.
This morning, everything seems to be OK. The taillight is still out, but it's not chiming repeatedly (at least for now). What caused my Phaeton to freak out like that?
I am looking at a used 2003 X with a 140k miles. The truck is very clean and seems mechanically sound. This will be my third X! The only problem I found is the trans selector is difficult to move. Once driving the trans seems fine. No leaks anywhere. I believe this is cable actuated? Is this something minor or should I run away?
View 14 RepliesParked truck, went to leave and truck starts and runs fine, says brake problem on message, wont let me move gear selector out of park, is there a way to do this manually and get it to neutral so it can be towed??
View 2 RepliesI am just about committed to purchasing a 1997 Ford E350 extended cargo van with the 5.4. The transmission shifts through all the gears nice and firm (reverse also works). The only issue with the van is the column selector lever is very hard to move between the entire range of PRND21. It also does not "click" into the selected positions, you have to just line up the pointer to the desired gear selection.
Is this a complete deal breaker (internal transmission issue/replacement necessary) or, is it something relatively simple (such as a worn selector cable). The owner did admit the van has been sitting for sometime. It has 134,000 miles on it.
I was working on my shifter interlock and got a text message that says " gear selector reduced function" fixed the problem but cannot clear the text tried to clear with my code scanner no avail....
View 1 RepliesI have a 2003 f250 and I am unable to rotate the hubs from automatic. I have removed them and while I had them apart, I was still unable to rotate the selector. It wouldn't turn even with a crescent wrench putting pressure on it. I repacked them with grease and reinstalled and they still work when in 4 wheel drive. I am just concerned that when the vacuum does go out, I will not get the hubs to manually lock in.
View 10 RepliesLast night I jumped into my Treg to move it into my garage. When I pushed the brake pedal to move the gear selector out of park, I heard a whooshing sound. Like the sound of a bellows-type foot pump I use to inflate my dinghy. I could also feel a slight amount of movement in the transmission lock button on the top left side of the shifter when doing this.
Now I'm noticing this noise whenever I apply the brakes. It doesn't appear to affect braking performance, but does have me wondering. I'll have the dealer check this out when I take the Treg in for the recent recall (got my notice yesterday).
I'm a complete novice having just bought my first Phaeton today. However I was somewhat surprised and dismayed when the gear selector handle came off in my hand. I'm not sure if something has dropped out, but now the locking button does not operate.
As the car is still under warranty presumably this will be an easy fix? Is this just a freak accident or is there a known weakness? By the way the gears operate perfectly without the handle but its not the look I'd opt for!
Got in the car today and moved the gear selector into the manual shift mode. Usually there is no play forwards or backwards. Today there was about 3/8 of an inch travel forward before the spring tension started. I'm taking the car in tomorrow to have the console latch replaced but was wondering why encountered this anomaly in the shift mechanism?
View 2 RepliesCan't start my Tiguan this morning. Getting the message "Move lever to P/N". The lever IS in park - moving to neutral doesn't work either.
Last night the girlfriend turned off the car while it was still in gear (she's used to manual). I've done that before though and never had any issues. You can't actually remove the key until it's in park anyway.
However now the computer seems to be stuck on the idea that the vehicle is still in gear. Not sure what to do. Guess I'm going to just keep trying it through out the day and hope it ends up correcting itself. I'll just work from home today/tomorrow. But I'm eventually going to have to get it towed to the VW dealership.
Does the shift selector on the 92 Celica ST, lit up when the other lights comes on, like when turning on the headlights, and if so, how to replace such light? like what I would need?
View 1 RepliesWith my '04 V8, recently on my dashboard the selector gears light-up entirely, where as typically just the selected gear is highlighted with the orange box when operating. Make sense? P, R, N & D all are highligthed in the orange color.
It does this inconsistently in both automatic and tiptronic. Just last year I started using the vehicle to pull our pop up camper. No problems last year and it pulls fine. Two weeks ago on our first weekend out camping, using the tiptronic I noticed that all speeds where highlighted.
Sound I be concerned about this? I called local dealer, they had no clue. I called VW and they said take it to a dealer. The vehicle seems to be operating just fine.
In my 2004 Camry the lights for the gear shift selector and fan speed and temperature dial are out. Is this a common light source or fuse that controls these lights?
View 1 Replies