I can not start the car by pressing the Start / Stop button. The display shows the message "Key Non found". Remote control key with normally opens and closes the car but the car itself does not open the approach to it. I have two keys and the two are the same.
View 7 RepliesSanta Fe 2013. I bought it a few months ago and soon after a strange issue appeared from time to time. When I push the start/stop button it spins the engine but it wont start no matter how much I wait. Usually it start fine for the second time. This happens sometimes and sometimes not. About 2 months ago it didn't want to start for about 5-10 minutes no matter what I tried (push the button with the tip of the key), so I decided to go to a service station.
There they connected the car to a computer to check if there were any error codes logged. But they haven't find anything, after the second time I visited the station they replaced the battery in the key, told that maybe that was the problem.
I really don't know much about cars but it was a strange idea as I would expect the same behaviour when the battery is low than when the key is not present: Car not doing anything but displaying a message that the key is not present.
Anyway, it kinda worked, or I was lucky. For more than a month everything was fine, not a single issue. And today morning it started again. I brought my car to a hand washing, and after they cleaned the outside with steam they wanted to park the car inside the building to clean the interior, and the same issue occurred. And after that it happened with me as well several times this day.
Lately I've been getting the Stop! Car too low! message when I start the car if it has been sitting more than 6 hours or so. the front appears to be too low. After 20-30 seconds, the front end raises up high enough and the message goes away. It didn't do this when I first got the car. I'm going in for my 80,000 mile service soon.
View 17 RepliesI did the installation of the start/stop button and it works. However, I have some unresolved issues. I have done a search in the FAQ thread but could not find anything referring to the following:
1- When I lock the car, either with the fob or with the door buttons, the alarm will sound when I enter the car if I unlock it using the door handle sensors. I can disarm the alarm with the fob, but it is not disarming with the door handles. How can I solve this issue so that the alarm is disarmed with the door handles? Can this be solved using a VAG-COM?
2- When I turn on the alarm, either with the fob or the door handle, the alarm indicating light blinks for a few seconds, then goes steady, and then blinks normally. I had not noticed this steady light state before. My alarm, I think, always went straight to blinking and stayed blinking
.
3- When they gave me the car back the adviser said that the seat would not move and the trunk would not open. However, I think they ran down the battery because the interior light was on. The dash displayed the "start the car now" message.
a) I had an almost two hour drive back home, do you think that the battery recharged in that time?
b) Was there any lasting damage done to the battery?
c) Is it safe to charge the battery with a trickle charger or do I need a special and specific charger?
The trunk now operates OK and the start/stop button also works. I wish the alarm also did.
My rotary push button, the big round button in the middle of the infotainment system stopped working a day ago. It was working one day and stopped working the next. If freely rotates without any resistance, but doesn't carry out any of the previous functions that it performed. All the other buttons on the infotainment system work perfectly.
I have a 2005 W12
About 2 months ago, I had the battery replaced in the key fob just because it was over 2 years old. Today my first messages I get is "key not found". Key is in my hand. Then the next message is press start button with key fob. Finally got the car started. Is this a sign of bad battery in fob or something else?
2013 Limited
I started the car with keyless push button and almost immediately moved the gearshift selector from Park P to Drive D. I drove like this for several miles on traffic-congested surface streets. The Phaeton felt as if I was on 2nd gear. Upon stopping, and moving gearshift selector to P, Phaeton would not turn off engine by hitting the keyless push button Start/Stop. I had to plug in the key (had not done that in a long time!) and twist it counterclockwise to kill the engine. Upon rebooting the car (used to be called re-starting the engine, I guess), everything went back to normal.
Photo of screwed-up transmission indicator : [URL] ....
I'm getting a service now message on my display but no other warnings. Why this would be coming on?
View 7 RepliesToday when I head home I was getting the message "Move Selector Lever to Position P." It would come and go. No other lights or warning what so ever were lit. What this message was for and why it was displaying??
View 6 RepliesI have a 2010 prius and I have to hold the key next to the push to start button. I took it to the dealer and they told me they had to change a smart key module and 2 new keys. I told them to do it. I picked it up and worked great, 2 days later the same thing happened.
View 11 RepliesCan install a push button start feature on lower models of the Prius C? Example: I've been looking at C's but cost is a big issue. I figure I should wait to get a higher model with push start to get the whole Prius experience. The PC 2 is more in my price range, though.
View 3 RepliesI need to get the push start button out so I can clean the electrical contacts. I've seen a DIY elsewhere online but it was for a push start button located in the steering column.
Does this involve removing the entire center console, or possibly just the shift boot and ring? It's a Tiptronic 4motion.
I want to know which method is the more appropriate and safer option to start the engine with a push button. There are two ways:
Method 1) You get in the car, press the brake, push the button to START
Method 2) You get in the car, push the button till all the lights come on, wait for a few seconds, press the brake, and push the button to START
Which one is more recommended? Does either option have any affect on the mechanism and life of the Push Button function?
My 2014 Tiguan SEL has been giving me issues with the start button - hesitates at start, tries to start but doesn't and won't start at all. Took to dealership in March/April and they had it for 2 days. "Couldn't duplicate" so nothing was done.
I've read about this same issue in other VW forums and how cleaning the contact points on the start button has eliminated this problem. Unfortunately, the start button on the other VWs is on the steering column. How to remove the start button? Do I need to remove the entire center console? I've already tried by taking off the boot/trim and can't get to the button.
I have a 2006 Lexus GS 300 and about two weeks ago the key fob stopped working. I replaced two new batteries and nothing. I read up and found that if you place the fob over the start button and wait for the green light it would start. I have been starting the car like that ever since. Now here is the issue. Yesterday I went out to eat and when I was about to leave it would not start with the key over the button. I did not get a green light, nothing. after trying for about 10 minutes I got it to turn on the electrical system (basically it acted like it started but didn't) all the lights turned on and I saw the Check complete on the dash but the engine did not crank or start at all. Finally I disconnected the battery for 5 minutes and connected it again and was able to get it to start and drive home, now back to the same problem.
View 6 RepliesJust got the new 2013 elantra 4 door sedan limited w tech package a couple of days ago...
I have the push button start and it works well.. no problems there.. but I noticed there is a small light on the button and it never turns on.. even at night. The font itself which reads "Start/Stop the engine" does glow blue at night or when the lights are turned on..
2006 Passat 2.0T
- Three days ago, after a cold start, while driving to work "STOP! OIL PRESSURE ENGINE OFF" came on the display and disappeared right away.
- Drove the car to work and did not stop.
- Came back home and saw "Some" Fluid leak on my driveway. I touched it but did not seem like engine oil (I am making this assumption based on the fact that the fluid was not dark, but it was oily".
- I have not received that warning after that single incident.
- I have not seen any new leaks either.
- But, when I press the accelerator, there is a ticking noise.. something like - if you put a card in a bicycle wheel.
My car is due for service. So taking to the dealer day after tomorrow. Miles: 70870....
While working on diagnosing my center console issue last night, my engine refused to start & I am completely lost as to what the issue is.
I hear a buzzing sound when I hit the brakes and push the button to start.
But all my headlights lights & interior electronics work fine.
I am so irritated as this happens on the SATURDAY evening and everywhere is closed on Sunday; hence I can't get the car serviced.
This is a brand new car w/ less than 2600 miles on it.
YouTube ....
So the other day I was waiting on my friend outside her job, but the car was on off, I got bored and pushed the Push Start button twice without holding the brake so only the stereo will turn on. However when I turned on the car again to driver off the stereo shut off and wouldn't turn on. It's been three days now and I was hoping it was some sort of glitch that would fix itself out, but it hasn't. Its a 2011 Sonata without the Navigation, Just the simple bluetooth fm/am radio with CD.
View 4 RepliesI'd like to convert my 2005 GX to a push button start ignition.
View 10 RepliesI am very puzzled with my new 2015 Lexus RX 350 , I parked my car at the gas station and suddenly noticed that I dont have my key on me and couldnt find it inside the car anywhere. I thought I dropped it somewhere outside but to my surprise when I tried starting my car it started fine assuming the key was some where close by.
I tried stepping out and to lock the car and got a message the key is inside the vehicle so car wont lock. I was able to start the car and drive it home about an hour drive car never complained about key not detected message. I called the dealership and they told me car will keep running if you drop the key outside while the car is running but after 15 mins of driving it will give a message key not detected.
I am locking the car now using the second remote but its risky to have the car in such a condition as any one can drive it away if they open the lock somehow. I have looked every where under the seat, in between the centre console and seat, under the seats key no where to be found. Could it be possible that key was dropped outside and the car is malfunctioning that its allowing me to start it and drive it without complaining.