Phaeton :: How To Engage Gear Lever Into N Position With No Power
Dec 30, 2009
Left the car for a couple of days outside... and tried to start it latter at -38 C. No matter how convincing I was - the engine wouldn't run. Well, now both batteries are dead... I have no luck in engaging the gear lever into N position so we can tow it into a flatbad truck... any one knows how to do it with no power? Also is there a way to manually open up a trunk of the car?
There is seems to be some weird electrical issue... while car just sits in a parking lot - batteries are drained out of juice... if its driven even for a small period of time - everything seems to be ok. Thats a first real let down from this car.
View 3 Replies
Advertisement
I am Having a problem on my 2005 Phaeton which has a 3.2 engine. Last time I drove it was yesterday and had no problems. This morning, I'd turn the key and it give me various error message."Move selector lever to position P/N" ...
I tried to move it but with no luck , the message is still there and I also noticed that the light on the shift that indicates that I need to press on the break to start is not glowing. This is not the 1st time I had this error but before I had to leave it for a while and it will start ...
I really love my Phaeton and it has only 75,774 kilometres on , so it is quite new ...
You can see the error message and the light indication below in the pictures ....
View 4 Replies
I have a European Phaeton 3.2 litre V6 (gasoline) from 2003 that is giving me some problems. When I am finished driving I put the gear lever to parking position and turn off the ignition. I then get a message "Move selector lever to position p" and the key is stuck in the ignition.
So far, I have been able to get the error message away (and with that also been able to get the key out) by starting the car and move the gear lever around. Some times I have managed by only starting the system (by not holding my foot on the brake pedal). But tonight I couldn't get it fixed after numerous tries. I then simply waited in the car, because I didn't really know what to do, and after maybe five minutes the system shut down (energy saving mode?) and I could finally get the key out.
When I tried google the error message I found some topics about it on the Touareg forums, but they got the error message while driving and it had to do with the keyless system (which my car doesn't have).
What might be causing this problem? My local VW dealer is not very used to Phaetons (I am the only on in my town with one).
View 9 Replies
Today when I head home I was getting the message "Move Selector Lever to Position P." It would come and go. No other lights or warning what so ever were lit. What this message was for and why it was displaying??
View 6 Replies
OK, this happened again. Driving along, try to change from drive to sport, gear lever button (silver on side of gear lever) remains in the depressed position. Can't get our of Drive or Neutral. If you switch the car off it will never start again!! I call McDonald Automotive in Denver and then drive all the way from Breckenridge with the car stuck in Drive making sure I would never get into a position where I would have to reverse. Also the key is locked into the ignition. McDonald has a loaner waiting for me. However, this seems like it could potentially be a dangerous flaw in the gear lever mechanism. It is very unnerving, almost like you cannot stop the car under certain circumstances (even though you can put your brakes on and stop and you can put it in Neutral, but you cannot switch the car off).
View 5 Replies
I have 2004 V8 Phaeton when i press the brake the transmission lever stays in park after a few tries it goes into gear.. does this car have a neutral safety switch or what could be the possible problem.
View 10 Replies
Got the following problem with my 2004:
1. Unlocked ny car this morning by use of my remote key and the alarm went off.
2. Got the alarm turned off by locking and unlocking my car several times by use of my remote keys
3. Put the car in reverse and took out of the garage. Parked the car and put the gear stick in P position. The knob on the left side of the gear stick remained in the "in" position where one usually can move the gear stick up and down between the gears.
4. However, I was not able to move the gear stick, and the main display said something in German like "Call the workshop".
5. Locked the car bye use of one of my three remote keys.
6. Later, after trying to solve the gear stick problem by moving the knob and the gear stick in several ways I was not able to lock the car with any of my remote keys. No messages were displayed.
7. I was only able to manually lock the door where I used my key.
The knob on the gear stick is showing scratch marks so someone has tried to do something to it earlier. I have owned the car since easter this year and has not experienced this problem earlier.
The battery on the left side of the car is new, and the batteries were charged for 12 hours two weeks ago. The car has not been driven much since easter, and has only been taken in and out of the garage four times during the last three weeks without being driven.
View 13 Replies
What are the positives/negatives to driving in the "S" position on the shift lever? What situations to do so/not do so?
View 5 Replies
So my parking brake doesn't engage when the lever is pulled. The light lights up on the dash saying the parking brake is engaged but the brake I not engaged. It hasn't been a huge problem for me since my Jetta is a 6-speed but I would like to fix it some time soon. Looking for a DIY? I did a quick search and didn't find anything really.
View 3 Replies
4x4 wont work, when I shift the lever on the floor it doesn't engage so i bought two new solenoids.. didn't work, have power on both solenoid connections. If I unhook my vacuum lines from the solenoid, I can push the Actuator rod in making my 4x4 work. I've gone threw everything.. have vacuum, have power on my solenoids. Just nothing works when I shift into 4x4 on the floor.
View 3 Replies
2005 V8, 25k miles. This morning I started the car and heard a clicking noise in the dash right behind the keyhole. It was intermittent and sounded like a cricket as I was driving. It was not too loud, a few db less than a turn signal click. Every few seconds, the MFI message said "Place lever in P position" ... Nothing else doing anything abnormal. Car otherwise sounds and drives fine. The 4WD knob was in high for normal driving.
View 4 Replies
Just started today my turn signal is acting weired. No matter which side I signal, it will, once in a while that does not have the "tick-tick-tick" sound and the signal light not function while the lever is still in the "turning" position.
View 9 Replies
I have 2013 elentra just about a year old, (Took delivery june/2012). Recently some thing happen on the Shift lever, can't shift to "R" for back in parking, Shift to "N" is OK.
Some time it can't shift out from PARK to "R" or "N" or "D" ... Under any of this situation,car engine would not start.
Sound like the SHIFT LOCK did not release properly, or the Brake paddle position switch input did not send to Computer for engine Start.
View 14 Replies
I recently bought my first EX and I finally had enough of looking at this
The transmission shift lever indicator not being in the proper position needed to be fixed!
After some searching, I realized what the issue was and was quite surprised that the "fix" is replacing the entire shift lever indicator assembly. Seems overkill but right on par of with the way the world works nowadays.
The other solution I found was by a company called Dorman. They make a Shift Indicator Cable Bracket, which is the only part that was damaged in my case as you can see here. The white part pointed at by the arrow is supposed to be attached to the rest of the white plastic.
I looked around the garage thinking I need some glue. And something to reinforce the freshly glued parts. That should have been much more difficult as I don't regularly fix tiny plastic parts BUT I quickly came across this old external hard drive cover.
Broke some tabs off, trimmed them to size and poured glue all over the place.
This is what I ended up with.
Now my OCD can focus on something else
View 2 Replies
I am having a problem with my rental passat, its a 2013 with 860miles and the seat lever that makes the seat recline broke and now the seat wont return to normal sitting position, its laid out almost flat. How to fix this? I am guessing there is a wire in there somewhere that will release it ...
View 1 Replies
Well I read most of the 2011 manual last night to find out why I have "M" on my gearshift, & found it near the end...so we can manually shift our gears. So I normally drive in D, and I use the tow/haul switch when trailing...so under what circumstances does the normal person need to manually shift through 5 gear positions using M, and the 5-position switch?
View 7 Replies
I searched for a prior post on this without success. I have a serious problem with my '04 V-8 transmission shift lever being stuck in Park in cooler weather. Ny wife is the primary driver, and on some cooler mornings it is almost impossible for her to move the shift lever out of park. She has to let the car warm up a bit, and then move the lever around a bit with all her might before it will finally move out of park. The dealer can't figure out what is wrong. It only appens when the temperature is below about 50 degrees, and with winter approaching, frequent problems lie ahead.
View 24 Replies
I searched for a prior post on this without success. I have a serious problem with my '04 V-8 transmission shift lever being stuck in Park in cooler weather. Ny wife is the primary driver, and on some cooler mornings it is almost impossible for her to move the shift lever out of park. She has to let the car warm up a bit, and then move the lever around a bit with all her might before it will finally move out of park. The dealer can't figure out what is wrong. It only appens when the temperature is below about 50 degrees, and with winter approaching, frequent problems lie ahead.
View 24 Replies
Not sure if this is normal. Only noticed it recently but my HI-LO gear lever vibrates. The faster I go the worse it gets. Why?
I spoke to a friend who's a mechanic. He reckons everything's fine. We just put some new grease into the transmission, etc.
View 1 Replies
I have a 2012 Elantra Limited with about 36000 Miles. I purchased this car used with 12000 miles. I commute to work about 90 miles round trip a day mostly highway. I usually average about 33 or 34mpg. Recently, my mileage has fallen to 22 or 23 mpg and I have noticed my car having problems shifting. When accelerating normally, 1st - 3rd shift normally. Once I get into 4th, the car won't shift into 5th unless I manually do it with the gear lever or play with the throttle. If I just accelerate it will go all the way up to over 6000 rpm before it will shift. There are no problems with down shifting. Once it gets into 5th it will shift into 6th normally. There are not warning lights on and it doesn't always do it so of course when I need to recreate it I can't.
View 26 Replies
I have a 99' GMC 1500 Sierra SLT w/5.3 Vortec V-8 w/460,000 miles (yup !!) I bought the p/u w/59,000 miles, and the gear-selection lever on the column has always been hard to move when selecting gears. My daughter drives the p/u, and is hard for her to select gears.
View 1 Replies
