Phaeton :: Driver Side Heated Seats Don't Work Anymore?
Nov 7, 2014
My driver side heated seats don't work anymore. Passengers work fine just figuring out what could be the issue.
View 5 RepliesMy driver side heated seats don't work anymore. Passengers work fine just figuring out what could be the issue.
View 5 RepliesI am having a problem with my driver's side heated seats on my 2011 Elantra. When I press the button to turn on the heated seats, the lights on the button turn on for about 1 second, and then turn off. The passenger side and back seats are all heating properly...just for some reason my driver's heated seats don't turn on. I stuck my hand under the seat and it feels like everything is connected. Any reason why the lights on the heated seat button turn on for about 1 second, and then turn off?
View 12 RepliesPrius four with heated leather seats noticed especially on the drivers side seat bottom on the side bolster just as you slide in not the center section. I noticed it when new, it looks like a maybe wire between the leather and seat foam.
View 4 RepliesThe 'issue' is that for the driver's seat (18-way seat), position 1.5 is slightly too hot and position 1.0 is slightly too cool. The adjustment is only in 0.5 increments so I have a problem - so far the only solution has been to keep changing the setting between 1.0 and 1.5 every few minutes.
On the passenger side the ratio of heat to settings is slightly different and 1.5 is about right. Is there any adjustment / calibration possible between adjustment setting and actual seat temperature?
The heated seat on the driver side does not work. I replaced the switch (near the center console) and checked the fuse, but it still doesn't work. The light on the switch comes on, but no heat.
View 4 RepliesI noticed if it's around -30c heated seats won't work until car has been driven for a bit. Sometimes only 1 seat can be heated at a time. Usually lights in buttons flicker. Other owners in cold weather want to add to this?
View 15 RepliesI have a 2011 lariat with the heated leather seats, out of a sudden the passenger side stopped working. Light comes on but no heat. We did notice leading up to this it was getting extremely hot to the point it was too much heat. Fuse is good?
View 10 RepliesMy driver side does not fold in anymore. I can hear the motor but it doesn't fold.
View 2 RepliesI have a 2003 base toyota prius. You can lock all the car doors from the drivers side or from the passenger's side. I did that today and left then had to get something from my car about 15minutes later. When I pushed the lock to open the other 3 locks for the other 3 doors they won't open. Only the driver;s side will open. When I pushed the lock to open/close all the car doors on the passengers side only the driver's side would open/close. I thought maybe I hit the child safety lock so I pushed it but it still wouldn't open the other doors even though all the windows roll up and down from the drivers side and from the actual doors they are on. What is wrong with my locks? Did I accidentally push teething and how can I get it fixed??!!
View 2 RepliesWhy my fuse for heated seats keeps burning out??? It works for a day then next day heated seats don't work.. Changed 3 fuses in last week!
View 3 RepliesMy wife has a 2012 Camry with cloth seats and integrated air bags.
I'd like to install aftermarket heat elements. I'm worried that I'll damage something with the airbags as I pull the covers.
I plan on disconnecting the battery, and then removing the seat from the vehicle however the built in airbag has me worried.
I want to mount the switch in the empty panel next to the traction control button.
Where is the closest fuse box on this vehicle?
I got a 2010 Prius with factory heated leather seats and problem is that they are always powered on, driver and passenger side, both of them.
When I press switch under the bar it makes click sound but does not make any difference, the light on the buttons are steady ON no mater you press it, hold it or anything.
I have a 2016 Hyundai Elantra with the Value Pack that I bought just a few weeks ago. The car has heated seats that work great, but the heated seats always seem hot. They are certainly not as warm as when you have them turned on, but they always feel very warm.
View 5 RepliesWe havent use our heated/AC seats for awhile. Now we noticed that the heated/AC seats will goes lower after awhile.
I asked the dealer and they're told me is normal. Lexus designed that way. wtpho!
I'm currently using a 2016 NX200t loaner and both heated/ac seats stayed on at the same fan speed.
Is it normal or dealer just playing with me?
Both seats stopped heating at the same time. The lights on the switches don't light up anymore either. Winter is coming to Colorado- where do I start to try to figure out the problem?
View 2 RepliesSo I picked up an 06 passat this weekend. Everything is great except that my heated seats aren't working. I'm sure a few of you are experiencing this cold snap. I checked the obvious being the fuse(es). I noticed on the right panel it doesn't accept a fuse. I assume this would be for rear heated seats? The one on the left seems to be unblown. Where to check? Or my next step?
View 3 RepliesFor some reason my heated seats arnt working in the front, why?
View 4 RepliesI have a 2014 IS350 F sport and I don't like how the heated seats when turned on max heat, it automatically decrease in heat level over time. Is there anyway you can set it to stay max hot? I don't like how it goes to Min setting after 10-15 mins or so.
View 2 RepliesI noticed the heated seats won't turn off. Is that normal? If it's turned on and shows 3 bars it won't slowly go down to off.
View 11 RepliesAlthough the manual is silent on the topic, I can swear that the font seats in my new PriusC warm up on cold mornings. There is no on/off switch for this to happens...
View 2 RepliesMy friend is not able to get the heated seats to turn off.
I found the fuse for the a/c and seat heaters combined, but no separate fuse.
Both seats are on. Pressing the button shuts them off, but releasing the button powers them back on.
I need a wiring diagram or how-to ???