The instrument cluster screen in my 2004 phaeton suddenly stopped displaying anything today, I've tried removing and replacing fuses but still nothing, not even the backlight for the display is on, everything else is working fine its just the display. I need the car for a 600mi trip in 2 days.
View 3 RepliesI have a 2004 F150 (New Body Style) with 5.4L 3v and about 266k miles. My Alternator finally bit the dust and my instrument cluster went from reading speed, temp level, odometer, RPMs to being blank and all needle gauges bottoming out on the "0" side. Removed Alternator and had it tested, found Alternator Failed tests. Ordered and Installed New aftermarket 110a Alternator. Battery was fully charged (13v) and passed load test out of the truck. After installation, started the truck with no problem, instrument cluster gauges all read normal when turning key to on position, after starting and let run, instruments and gauges blacked out and returned to "0". Battery was reading 13v and with truck running read about 17v. What could be causing this?
View 3 RepliesThe information screen is out on my '04 instrument cluster, and I hear that I have to replace the whole cluster. Can I replace it with a used cluster, or does it have to be new. The dealer is telling me that it needs to be new in order to do the reprogramming of the keys, etc.
View 5 RepliesWhile traveling speedometer and fuel level indicated blanked out. No other problems--I could see our speed by using GPS.
Toyota service said a circuit board was burned out. I searched and found numerous such problems with 04 up to 09 and eventually (in 2012) Toyota initiated an extended warranty to cover replacement of the board.
I have very recently purchased a 2011 GX. Everything seems to be in working order, aside from the "multi-information display" in the gauge cluster. While the electronics options screen functions as described in the manual, pressing the menu button results in a blank screen instead of switching to the customization and/or driver information screens.
View 3 RepliesThe instrument panel on my Prius (speedometer, fuel gauge, etc. on the dash) keeps going out intermittently. Took it to the Toyota place and of course the lights were back on.
View 4 RepliesRNS810 ... My display went blank even though all the touch screen features are available (but hidden from view). Phoned VW who say there is a software update to address the blank screen issue - will try and get it done tomorrow.
View 1 RepliesStarted my 2013 RX this afternoon and it indicates these two alarms on the instrument cluster, Engine Check Light & Track Off. Found out that my gas cap was not tightened (let my son fill the tank when he borrowed it the night before). Hooked up my OBD II scanner to clear and it shows two codes P0441 & P0445. They reset but my scanner says they are permanent. What does that mean? Will stay as an error until the ECU says otherwise?
View 13 RepliesNoticed a digital "shadow" to the electronic speedometer display? Below is a picture of what I'm seeing. It's not a viewpoint or reflection that goes away from a different angle. It's like there is an alignment issue or something.. I know the display image is a projection from below, to create a distant focal point. But I see this image shadow.
The one in my 07 Prius doesn't do this. Click on the pic below...
When I choose the screen on my instrument cluster that is suppose to show speed I do not get a reading. It shows 0 mph. The average speed shows correctly, but nothing else. The correct readings are displayed on the center console unit including speed and average speed so I think the sensors are good. Is this something that can be corrected using VAGcom.
View 4 RepliesJust wanted to check my memory / mode of operation of instrument cluster illumination... I seem to recall that the main instrument cluster dials were illuminated at all times, ie full brightness during the day with the headlights off and with variable brightness at night with the headlights on - is this correct?
Reason for asking is that the main dials, speedo / rev counter are now dark when the headlights are off - this does not seem right as, in other than bright sunlight, the dials are very hard to read - centre LCD display remains back lit OK.
With headlights on, illumination works as expected - when headlights go off, the main dials stay illuminated for a fraction of a second and then dim to off.
In the past few days, I've noticed that when my headlights are on the white backlighting of the speedometer, tachometer, and other gauges in the instrument cluster fail to illuminate, however the red needles within each gauge do illuminate properly. Furthermore, the rheostat adjustment does successfully brighten and dim the red needles, but the faces of the gauges remain dark. I checked fuses 23 and 27 and both are fine.
View 24 RepliesMy car lives in a parking garage which by nature is well shaded. In the last few weeks, when I start the car, the orange hands on the instrument cluster come on at full brightness (which I think is normal), but the rest of the normally "on" panel fails to light up meaning, that the white digits on the speedometer range are dark, the ones in the tachometer, etc.
The dash looks like something from science fiction, which is cool, but is nearly useless when all you see is a bunch of glowing orange pointers! After a few minutes, the back light turns on through no action of mine and all is well in the analog instrument cluster area.
In the past few days, I've noticed that when my headlights are on the white backlighting of the speedometer, tachometer, and other gauges in the instrument cluster fail to illuminate, however the red needles within each gauge do illuminate properly. Furthermore, the rheostat adjustment does successfully brighten and dim the red needles, but the faces of the gauges remain dark. I checked fuses 23 and 27 and both are fine.
View 24 RepliesToday I had the joy of covering 200+ miles on my W12 today. While I was out and about there were 3-4 times I went around a right hand turn somewhat quickly and a "check please lights" warning appeared on the instrument cluster. At the end of the day I inspected the exterior lights with all working or so it seems. I found it odd that this only appeared during sharp turns to the right.
View 10 RepliesI've had a Phaeton since January and love it. I noticed yesterday that the "distance remaining" figure in the small nav screen in the instrument cluster has disappeared: it now shows "---" instead of, say, "150 mi." Refilling the gas tank hasn't made a difference. Why the car has started refusing to estimate? Since that's the display that shows all the time while driving, it's particularly noticeable.
View 4 RepliesThe small monitor between tac. and speedo. Everything is displayed except it is very dim.. How to correct this?
View 5 RepliesSomeone mentioned that the lighting on the speedo/revs came on after a delay instead of slowly getting brighter. Anyway mines now doing this, the needles light up red then maybe 15 seconds later the background lights come on.
View 24 RepliesThe lighting on the speedo/revs came on after a delay instead of slowly getting brighter. Any way mines now doing this, the needles light up red then maybe 15 seconds later the background lights come on.
View 24 RepliesMy 2004 Phaeton with a little over 100k miles on it has been giving me a problem with the air ride suspension. When starting the vehicle, a "Level Fault - Workshop" message is displayed on the instrument cluster, and the car has been slowly sinking as the air ride (I presume) slowly deflates. Around 10,000 miles ago, I had a problem with the suspension, but that time the car immediately and actively sank; this was solved by replacing the air ride computer (it is the B, not C-type). I've tried replacing the computer with another B-type computer, but to no avail. The local VW dealer and an independent import car garage have told me some things, and I would like to learn more about this problem and possible ways to try and solve it.
1. I have been told that no voltage is making it from the computer to the left front sensor. Dealer says its the computer, but could this possibly be the wiring harness or a bad connection? If so, how do I get into the wheel well in order to test this hypothesis? My best guess is it isn't the computer, as the car never actively sank (this happened when the original computer went bad).
2. I have also been told that the right rear sensor is bad. Is this a part I can replace with a modest amount of auto knowledge? I do my own oil, replace brake pads/rotors, etc. If so, any drawing/maintenance manual parts list available?
3. I have heard conflicting reports as to a freshly-ordered sensor being and not being compatible with the B-type computer. Dealer told me new sensors will only speak to a C-computer; independent garage told me new sensors will speak to my B computer. Who is correct?
From a few hours of internet browsing from the first instance and this second instance of failure, it seems this is a somewhat common issue with the 2004 Phaeton.
The other day I saw this message (or something similar) in the instrument cluster display for the first time. I was parked, car unladen, engine not running, parking brake on, facing somewhat uphill, when I attempted to change to the higher ride height.
The Handbook doesn't refer to conditions for ride height adjustments.
I'm pretty confident my batteries are fine. I attributed the reluctance to the fact that the car was pointing uphill, though on reflection may that not be exactly a time when you do need to change ride height?
A few minutes later, driving on the level, the ride height adjusted perfectly well, and it has done so since whether moving or at rest.