I know that the rear emblem is two pieces, I want to color match the black to silver then black out the VW. Is there a way to just take off the silver VW without removing the whole thing off the back?? If so, how?
View 2 RepliesSo I went and bought a flat black rear VW emblem. Of course the new one isn't shaped the same as stock, and the adhesive gave out. What adhesive I should use? Tape, liquid...
View 2 RepliesWant to paint color of car black stealth look! Painting everything black door & rear bumper trim black.
View 2 RepliesI was at Home Depot and came across a can of Plasti-Dip so I figured I will get it and try blacking out my rear emblem. I remember recently seeing someone discuss how to remove this so it could be painted. I used to search using like 10 dif keyword combo's and found nothing.
View 5 RepliesI am installing the wiring for trailer lights in my 2007 B6 wagon. I need to remove the interior trim panels for this, but I can't find any diagrams or DIYs on where the screws or clips are. I don't want to just go at it and end up putting pressure in the wrong places and breaking clips.
View 1 RepliesI thought i would waste my weekend trying to put my katzkin interior in, its proving to be a lot harder than i thought. I've been searching this but haven't been able to find the details on how to take the bottom of the backseat out. its hinged and folds forward, but i don't see any screws to take it out. this is obviously different from a sedan. there is a plaistic cover over the hinge and there are no screws under there either. this is a 1999 wagon. also where do I get this 12 point torx to dismantle the front seats? i just took the front seat out and took it half apart only to put it all back together again.....
View 1 RepliesI tried searching and I was not able to find how to remove the rear emblem.
View 9 RepliesI got the grille emblem off my CC in minutes. I'v've got the grille off and have spent literally hours trying to remove the badge with no results. The basketweave backer came off easily, but the badge won't budge!
View 4 RepliesI just bought this grill [URL].... and it fits great. However, the grill does not come with a emblem so I was just going to put mine from my 06 Passat on but it is a lot smaller than the opening on the new one. Am I just missing something here, or are there different size grill emblems on some cars? Or is my new grill just messed up?
View 3 RepliesI am looking to black out my front and rear Toyota emblem/badges. I would like to get matte black. I've seen a few 2012 Camry's with it, but am not having any luck finding them online.
View 14 RepliesI'm trying to take out the rear center headrest and I can't for the life of me work out how. Holding the button on the leg collar down only lets me raise it by about half an inch.
View 10 Repliesinstalled some st coils in my mk6 and I want to get the back a bit lower. I know Ican take the rear perch out but should I use that rubber insulator that came on the stock springs or just the the coil sit right against the top mounting point?
View 10 RepliesHow to remove the rear air vents in the center console? The black directional piece that adjusts the air left-right, has fallen into the vent so I need to remove the outer vent to put it back in place.
View 3 RepliesHow to remove the rear wing on the hatch so I can mount my sirius antenna underneath it? I searched wing with no results...
View 8 RepliesDo you need to take off the bumper?
View 2 RepliesI have just installed the V2's on my R - amazing! however the rears are a bit soft for my taste. I am wondering can the damping be adjusted without removing the rear shocks? Can I access the damping adjusted from the trunk?
View 9 RepliesHow to remove the rear tail lights on a Jetta city. The ones on the trunk lid.
I have switched out all the bulbs for led and can't find how to get to the reverse lights bang head.
just got back into a .:R 6/18/13 and took it to a nearby jiffy lube to get an oil change not 100% sure if they're responsible or not but i noticed the belly pan was hanging rather low and broke not too long after. ordered a replacement from ecs w/ the 3 M6x20 pan->subframe bolts since they were missing. got under the car today to replace/install new pan and noticed that 2 of the missing bolts were broken in the frame. tried searching but found nothing?
View 4 RepliesMy passenger side rear vent window is leaking and I was gonna redo the weather stripping but I can't figure how to release the latch from the motor. It looks like a ball and socket type connection with a little wire clip in it, but I tried pulling it out and it wouldn't come out very far, and tried pushing in in more but no luck. I don't want to break the darn thing for sure.
View 9 RepliesPulling the pan off a 1.8 B5 while still in the car? Book says it can be done, but can't quite get enough clearance. Any secrets?
View 10 RepliesRemove rear bumper on IS? Wanting to install a rear diffuser myself but don't know where to start in removing the bumper.
View 5 Replies