Passat (B7) :: Pedal Feels Almost Loose When Applying The Brakes
Jun 20, 2014
2014 Passat... I've got a little over 2,000 miles on mine now and I really do like the car. However, one thing that is really bothersome to me is----the brakes.
I'm not sure if it is specific to my car or to the passat in general. Here's the issue:
When applying the brakes, the pedal feels almost loose, as though the is no pressure on it, but once you push the pedal down far enough the brakes come on heavy, hard and fast. It's like turning on a light switch.
I am wondering if this is an adjustment that I can have done at the dealer to put more feel into the brakes or if this is just something that we all have to live with, of if maybe there could be something wrong with the brakes on my car.
View 4 Replies
Advertisement
I have a 92' Escort GT and the clutch started to act up, it's not burnt cause it is fairly new. The clutch pedal feels slightly looser when pushing it to the floor, the feeling like a cable snapped or something?
I'm pretty sure the clutch is a hydraulic one, not 100% .. Is there a hydraulic reservoir that somewhere that might be low?
View 4 Replies
I have a 2002 Honda Civic EX 1.7L. Recently the brake pedal would sometimes go to the floor when I'd apply the brakes. The car would still stop, but not as quickly as normally. If I apply the brake and it goes to the floor I would release the pedal and reapply the brake and it would stop at it's normal position and the brakes felt firm and the car would stop fine. I was told my problem was the master cylinder so I bought one on Sunday and replaced it. I bled the lines and it seemed like all the air was out. The brakes worked great and the pedal stopped in the same place and was firm.
Now today on my way to work the pedal went down a little farther than normal during one stop. On the way home it stopped in different places. The brakes would always grab and the pedal felt fairly firm wherever it stopped. I drove it this evening again and the pedal went to the floor like with the old master cylinder. One pump and they grabbed in the normal spot. What is going on? Did I not bleed the lines well enough? Is the new master cylinder just junk? I saw in the manual that air can get trapped in the ABS sensor, but an air bubble problem should just make the pedal squishy, not change where it grabs, right? I'm stumped and I really don't want to take my car in if I can fix it.
View 6 Replies
So I have a 2004 Jetta 1.8t. Recently I noticed an issue with the brakes. It is a rare occurrence that this issue happens. Maybe 1 out 6 times I slowly stop the brake pedal seems to put pressure back against me applying brake pressure and makes somewhat of a grinding noise and the brakes don't seem to grab as well. But a split second later the brakes return to normal and grab as expected. Could it possibly be air in the brake lines or something totally different?
- Front brakes are in excellent condition.
- Just replaced the driver side front abs sensor and put new rear brakes and rotors on.
View 1 Replies
I just joined as I bought my '97 F-150 5.4 4X4 about 3 months ago. The dealer gave me a 6 month warranty but hasn't honored it at all and I've had one problem after another. That's another story though but right now I'm just trying to fix the important issues. The problem at hand are my brakes.
I was noticing a couple days ago (maybe I never noticed it that much as it was a new vehicle to me) that when I apply the brakes it sounds like a bicycle pump and the pedal travels nearly all the way down. It doesn't hit the firewall but I'd probably guess it has 3 more inches or less until it bottoms out. The hissing only occurs as the pedal travels and stops when the brake pedal isn't moving.
Now I'm not sure if the hissing sound is normal as I replaced the brake booster (from the junkyard though) and the new one still hisses when I apply brakes. The brakes seem to work okay, could be more sensitive it's just the pedal feels soft until it almost bottoms out like I stated before and the the brakes grab a little bit harder. What could it be?
View 2 Replies
I took delivery last week of a new 2012 F250 with a 6.7 Power Stroke Diesel. This is my third F250 with a Power Stroke Diesel. My first one was a 1997 w/7.3 PSD and my last one was 2001 w/7.3 PSD which I traded in for the 2012.
Now for my problem. The brakes seem spongy to me. When I am applying the brakes I get what seems like a longer than normal pedal travel (to me anyway) and soft. The braking isn't as good as my last two F250's. If I pump the brakes, the brake pedal firms up and the braking really improves. I have not contacted my dealer yet.
View 14 Replies
I had been hearing bang noise from my front suspension at certain times like when reversing car and applying brakes. It was happening since I bought my car and every time I have complained about it to local VW service guys, I was told by them that they cannot replicate the noise so there is nothing wrong. I even told them to have a look at front suspension bushings but again they said everything is fine.
Last week I went for 45.000KM Service and I complained about the same issue again and luckily this time service advisor heard the noise himself. Next day, they called me to inform that my front lower arm bushings needs to be replaced, front brake pads and discs, and front wheel bearings as well. In my response I told them that bushings were bad for long time and no one figured it out earlier and due to this my front brake discs had abnormal wear along with the wheel bearings.
I am still trying to relate that it is technically possible for brake discs at least to wear off earlier if the suspension bushings are bad as when you apply brakes, the brake discs are stressed heavily as the bushing are not absorbing any stress.
I would like to have thoughts on this matter. Just let me know if my understanding is correct or it does not makes any sense and technically would not be proved.
Just to let you know that it is 3.2 4motion model. My driving is average within 120 KM speed and never hit any potholes etc. Plus my brake pads indicator never went on.
View 10 Replies
My R is almost at 70k miles and the front end feels sloppy and loose. What is the best option to restore that new car feel or even get it handling better than stock? I already have United Motorsport strut mounts which definitely improved the handling. ECS has some suspension refresh kits (links below), but the question is which one should I go with? Would the Stage 1 kit with OEM replacements be enough? Or should I go with the Stage 3 with Powerflex bushings? I'm always down for upgrading rather than simply replacing. I'm sure that would get it handling real nice, but would definitely create a stiffer ride, right?
Stage 1 - [URL] ...
Stage 2 - [URL] ...
Stage 2+ - [URL] ...
Stage 3 - [URL] ...
View 3 Replies
I noticed today when I was washing the car that the rear bumper feels loose to me compared to other cars... If I grab the bottom the bumper, just aft of the rear wheel, there can be significant movements of the bumper, and its the same on both sides... I don't see any loose screws.
Tried it with other model cars, the movement range from very small to nonexistent...not sure if it's just my vehicle or if they are all like this by design(or the lack of). The top of the bumper feels rigid enough. Now I kinda want to know if this looseness is causing my bumper to be flapping in the wind at highway speed...
View 3 Replies
Having this issue? 2016 IS350 F-Sport. Car has 2700 Miles on it.
View 14 Replies
The steering in my '12 feels extremely loose, at highway speeds just a minor twitch on the steering wheel sends me right or left.
View 4 Replies
I drive a 96 honda accord and my dad just got a 2003 VW golf and when i drive it it feels weird. When i hit the gas on my accord its solid and hard but when i hit the gas on the VW golf it feels loose i can hit the bottom of the car in the gas and it wont make any reaction.
View 7 Replies
The steering on my Ex isn't working like it should. At times it feels loose when cruising then feels tight when straightening back out after a turn... the wander is really bad...
My PS fluid is also turning into a muddy brown goo every 5k... I changed the PS pump this summer with a supposedly good used one...
What should I be looking at/checking for?
View 4 Replies
Today when driving my 2003 Camry(148,000miles), I lost all throttle response. Car was driving normal, I stopped at stop sign, tried to go and got NO response when applying the gas pedal. car will idle fine at about 1000 RPM's. When pushing gas pedal car does nothing.
View 10 Replies
I recently noticed that my car wasn't performing the ABS self-test (that little brake pedal vibration and sound you hear when you reach 5 mph backing up on the first start-up of the day). Saturday I had to make a sort of emergency stop, and I didn't feel that ABS vibration in the pedal, and I even skidded slightly.
There's no message on the display about the ABS or anything else. I did recently have my front pads and rotors replaced with OEM parts, including pads w/sensors. Is there anything the mechanic could have done while replacing the brakes that might have messed up the ABS.
View 5 Replies
I have a 2003 Camry LE 4cly. Approx 150k miles. Car has been a good Camry. About 6 months ago it started to shudder when applying brakes. At first I thought rotors, but it seemed speed dependent. When over 40 it happens more often and more strongly. After the car gets below 10 to 20 the shudder ceases. Front pads are in reasonable shape. Rotating tires does not affect the shudder. Has never effected handling of vehicle. Brakes work without fail, just shudder in front end and steering wheel. I tried flushing the system, had not done that previously. Fluid was yellow, but not black. After the flush, the system seemed to shudder less, but still have the intermittent shudder. There are no error code for ABS, and the light is not on and does not come on.
View 5 Replies
So having done a single track day, I feel like my rotors must have warped, as there is now a slight vibration when applying the brakes. This is very surprising as I don't do anything out of the ordinary, and tried to use brakes intelligently, including a proper cool down lap and so on. Is this normal? What are my options for making life better? Is there some set of rotors I should get that wouldn't be prone to warping like this? Is it a question of pads?
View 18 Replies
Still chugging along!!
So, I haven't been the kindest car owner to my poor little hatchback. I do my best to get regular oil changes, but other than replacing the brakes last year, I have not kept up with most of the manufacturer's suggested regularly scheduled maintenance. The car has about 130,000 miles. Manual Transmission. My clutch feels a little loose, and I have been noticing a slight grinding sound when shifting (only from neutral to first gear).
View 5 Replies
I have a 2006 Toyota Highlander Hybrid 4WD. Whenever I apply the brake pedal past a certain point, I hear some sort of clunking type of noise from the front of the car. The noise can be done when braking hard, or even if I am at a stop and just press the pedal down hard. It sounds bad but I have not noticed any issues in braking performance. Everything is stock, brake pads have 60-70% as of my last serving. What this is and if I need to be concerned?
View 4 Replies
1998 base model, 3.1, about 232,000 miles on it.
purchased at about 45,000 miles and always had a slight "hissing " noise when I apply the brake.
Yesterday the car was parked on a very slight incline. Emergency brake was applied. a/c was on . I returned about 5 minutes later and heard a "hissing" type of sound. It seemed to be coming from under the dash on drivers side.
As I put my foot on the brake and shifted into reverse the noise stopped. Today at various times I have the same noise.
I've owned at least 40 cars in the last 50 years and this car has the very worse brakes of all . I've tried all types of pads, etc. The rear cylinders rebuilt about 150,000 miles ago. Master cylinder is original.
View 1 Replies
I haven't noticed it before but applying the brakes after driving thru snow I get an awful crunch sound. I have stopped the car a few times to look and it appears the wheel wells are clogged with slush but I don't know if that's whats causing it. After the crunching sound if I'm driving on a clear road there is no noise if I brake. Its much worse than say the crunch you get if the brakes are wet. Whats up with this?
View 3 Replies