Passat (B7) :: No Power Steering - Complete Lack Of Stability And Traction Control
Apr 21, 2013
Associated symptoms include no power steering, complete lack/absence of stability and traction control. This has happened to me a few times in the past, but has never stayed in after multiple start ups (and other remedial action). 2-3 times it's happened on startup, and cleared after a restart, one time while driving, and cleared on its own. This is going on the list of issues with less than 7k on the car.... 2012 3.6 sel
View 17 Replies
Advertisement
I cant find any info on this for the B6..
Is it just a standard LSD?
View 4 Replies
Evertime I turn left the brake light, traction control and stability control lights come on and the car starts dinging. Mechanic says it could be front wheel bearings because they are tied to the ABS system??? But I have been seeing alot about wheel speed sensors?
Second, everytime I brake suddenly, a cloud of smoke comes from the front end and there is a burning oil smell. The oil is fine and no leaks. Again mechanic says it could be a cracked CV boot throwing grease?
Lastly everytime I put in reverse or when I lightly put pressure on the brakes when driving I get this noise like a humming (errrrrrr) noise. Its not the grinding/squealing noise you would get when brake pads needs replaced. I only have 60k miles on this.
View 30 Replies
Is there any way to completely disable traction and stability control. I know pushing the button is supposed to disable stability control but I was told that you can't actually completely disable it.
View 5 Replies
Ok well I am not much for roasting the tires anymore but like to wheel a little, but how in the heck do I turn off the traction and/or stability control? Never done it before.
View 4 Replies
I own a 2008 Suzuki XL7, purchased new from the dealership in 2008. Recently, the vehicle sounds a dinging alarm inside the cab of the vehicle & the dash lights up w/ "Service Traction Control" & "Service Stability Control" warnings. These warnings appear sporadically - not at startup - but sporadically while I am driving, and in no specific time pattern. We have had the brakes checked, diagnostics run at a mechanic shop, purchased new tires, and changed the fuses. We have googled Suzuki websites & found that other people are having this problem, but no one seems to have a solution.
View 1 Replies
I have a 2009 Pontiac Vibe with 43,000 miles. Recently the check engine light, the vehicle stability control light and the traction control system light all came on simultaneously. Since then they have all come on or all gone off several times. Usually once they come on, they stay on for the remainder of the trip. Sometimes they will still be on when I next start the car, sometimes they will be off. What might be causing this?
View 17 Replies
For the past week I have had the steering wheel and traction control warning lights come on after I start the car after sitting for a long period of time. Once I drive the car a few feet the warning lights disappear. The model is a 2007 2.0T with 72,000 miles. What are next steps or should I head to the dealership? I'm out of factory warranty but have a third party warranty that expires at 75,000 miles.
View 1 Replies
as the title indicates i had the pleasure () of changing out my leaking power steering rack - all seamed to go well but right after that i am now getting a constent traction control warning light on my dash - what should i check ?
View 3 Replies
I have question about power steering pressure switch in golf 4 1.8t
Idle go high to 2000 rpm .. when i plug-off the Power Steering Pressure Switch its go fine .. i want know is this " Power Steering Pressure Switch " effect stability in high ?
View 3 Replies
I have 2 messages showing up in the message center / control panel. I have taken the truck to the dealership and we cannot recreate them while the truck is at the dealership. How it can be resolved.
2013 Ford Superduty Platinum : 33,800 miles and the truck is stock
Messages : service traction control / Downhill decent control fault
This will happen just driving down the road or just after starting the truck and taking off.
It has happened towing my work trailer and also not having the trailer connected to the truck.
View 14 Replies
I installed momo steering wheel and went for a drive everything was fine horn worked, just the traction control light wont come off .
View 11 Replies
Recently I started to have my EPC and Traction Control Lights come on once in a while (no CEL). And when that happens, it looks like my Passat is going into limp mode, because it drives, but it hardly has any power.
VagCom confirmed that the problem was coming from Throttle Body (I don't remember the exact code), I replaced the throttle body, did Throttle Body Adaptation, but I still have the same problem.
Here is the most recent VagCom screenshot:
Address 01: Engine Labels: 03H-906-032-BLV.lbl
Control Module Part Number: 03H 906 032 C HW: Hardware No
Component and/or Version: P 3.6-FSI-LEV2 G00 8030
Software Coding: 0000075
Work Shop Code: WSC 00028 028 00001
1 Fault Found:
000290 - Throttle Position Sensor (G69): Signal too Low
[Code] .....
View 4 Replies
I'm looking into being able to turn off my traction control off as need be is their a fuse I can pull or a simply diy to turn it off by a switch in the cab...
View 5 Replies
I have just purchased a 2013 Passat, SEL Premium. In my GTI, I could disable traction control with the "ESR off" button. I do not see anything like that on the display. Is this a menu function somewhere? While I do not need it all the time, when we do get deep snow, the traction control needs to be disabled.
View 2 Replies
ok.. I have an 05 1.8t. I just got a Forge Diverter Valve to replace the stock one. Changing out the Valve was pretty easy however after i was all done I started the car up and my Traction Control is not working. I just got the car from a VW Dealership, its not dogged out or anything. Could I have unhooked or moved something without knowing it? or is it just a coincidence that this popped up at the same time?
View 2 Replies
I posted before that i my airbag light just popped on unexpectedly I didn't change the radio or anything now I have no paddle shifter control, no horn/ no lights absolutely no power on my steering wheel. Is something disconnected under the seat. How to solve this problem...
View 5 Replies
My friends has an 06 3.6 motion sedan and has a problem. His car went into limp mode with the ECM and traction control light as well as CEL. we took it to the local dealer (45 min away) they scanned it and said that the throttle pedal was the only code that wouldn't clear. He ordered a new pedal from ECS and installed it today. The cars still in limp mode we read about a potential throttle body adjustment procedure (not too sure of the validity) any how followed it open hood open door ignition in the "on" position for a few minutes. After that when he started it every warning light came on. Is there a step in pedal replacement we re missing? On a side note the connector on the pedal end was fairly damaged not sure what from maybe the po had a botched replacement attempt? Not too sure what to try next.
View 5 Replies
I read up in an article I searched that removing the ABS fuse disables the traction, ESC, ABS, all that stuff. Is there a way that I can disengage my traction control and ESC without taking a fuse out if that is even possible?
View 1 Replies
My '07 passat has recently been giving the same error sequence, I am driving and start to accelerate when a ding sounds and the traction control light on the right display lights up, as well as the EPC (or ECP) on the right display along with the ! on the MDF display which blocks the use of the cruise control.
Shortly after (30 sec.) I lose the turbo, and then the engine light comes on on the left display. The turbo resets after turning the car off, and the rest to the error lights reset in ~24 hrs.
It happens when I am driving on dry clean roads, so I have not been losing traction. Took it to the dealer and they said the battery was bad, replaced it under warranty and all seemed well, but 5 days later the problem re-occurred, everything reset, and then re-occurred again 2 days later.
View 2 Replies
Yesterday, my vehicle stability control light came on along with the ABS symbol. I stopped the car and turned it back on and the car would not come out of Park.
I restarted the car and was able to shift into drive but, both symbols remained and the MFD showed no regenerative braking and the brakes were clearly mechanical only by sound and feel.
I think I took a rather short trip with the parking brake partially engaged, I was talking to my son who was home for the weekend.
I set and released it several times with no results. I finally parked the car, set the brake and checked for codes in my Scangauge-none. But, I did a "clear codes" anyhow.
I've only driven home yesterday and this morning to work. So far, nothing unusual, I have my fingers and stubby little toes crossed.
View 7 Replies
