Passat (B6) :: When First Take Off Car Feels Like It Is In High Gear Then Transmission Will Slip
Apr 7, 2007
I have a 2005 Passat TDI with 2500 miles & this car was wrecked and I recently got it back from the body shop. Well I now have a transmission problem. When I first take off the car feels like it is in a high gear. Then the transmission will slip. I have taken the car to the local VW dealer and they have given me the following information.
-Incorrect Ratio 4th gear #Code P0736 & 17110
-Incorrect Ratio 5th gear #Code P0735 & 17118
This leaves me with two options according to VW.
1. Replace the transmission
2. Replace the computer
2005 Passat TDI? Which would be more obvious as a problem?
View 1 Replies
Advertisement
I have a 2005 Passat TDI with 2500 miles & this car was wrecked and I recently got it back from the body shop. Well I now have a transmission problem. When I first take off the car feels like it is in a high gear. Then the transmission will slip.
I have taken the car to the local VW dealer and they have given me the following information.
-Incorrect Ratio 4th gear #Code P0736 & 17110
-Incorrect Ratio 5th gear #Code P0735 & 17118
This leaves me with two options according to VW.
1. Replace the transmission
2. Replace the computer
View 8 Replies
On my V6 tdi , the converter bypass coupling is closed very late : generally in the third gear arround 2200rpm. In second gear i found that the transmission slip a lot.
View 1 Replies
RX 350 (mine is 2013) produce a slight bump in revs as you decelerate moderately going from 2nd gear to 1st? It goes away after the tranny is warmed up. Wondering if it's just a result of the cold weather.
View 5 Replies
Recently upgraded to a 2015 DSG PP pearl white 2-door GTI. I'm really enjoying the car. It is my third GTI (MK IV, MK VI) but the first automatic. On the morning commute to work today my DSG straight up stopped working. While trying to accelerate from completely stopped at a stop light my transmission seemed to slip out of gear followed by the engine reving freely... A message appeared to "Press Brake". I had to stop my car in the middle of an intersection and then magically the transmission stuck in gear and i made it to the next stop light. Unfortunately at this light I was never able to get my car back in gear... I tried reverse as well as S mode shifting into 2nd or 3rd.
Had to get towed to the nearest dealership... at least I got to try out the carnet feature . Basically it is a glorified operator who will request a local tow truck for you. FYI.. I thought that the service would at least notify the service dept at the dealer it was being towed to (nope!). 5 hours later they gave me my car back saying that the cable between the ECU and DSG had come loose and that was the only problem.
So far the car seems to be driving like a champ again... I'm just a bit concerned as to how a cable can magically come loose and cause my car to be inoperable. The main reason I upgraded from my 2010 gti was the peace of mind that the car was going to be dependable...
A few questions... Is it feasible that a loose cable was the only issue? If so... how can a cable magically come loose after 2200 miles of driving? I could see this being an issue from the manufacturer but would think it would happen much sooner during the break in process.
View 1 Replies
I have 142k miles on my 2005 RX330 AWD. This week I can feel the transmission slip/shudder when shifting from 2nd to 3rd gear.
My local transmission guy is pretty reasonable but like most salesmen he's going to say rebuild it the entire transmission in lou of something less invasive.
View 6 Replies
Recently I purchased a 05 solara v6.
The car did not come with a remote and i feel archaic without it. I have ordered the remote from amazon but the car fails to go into programming mode. One thing i noticed while watching a video was as soon as the key was in the slot (not turned) the car started beeping. Mine doesn't do that.
Also the transmission seems to slip during 3rd and 4th. The car has only 65k and has not been used much by the previous owner. I have read about an issue that is 3rd and 4th flare?? is this a very common issue? I am thinking of doing the transmission fluid change..Will this cure it or is it a mechanical issue or software?
The issue isn't present during all 3rd and 4th shifts just happens every now and then.
View 3 Replies
My '05 Highlander transmission seems to be geared wrong. When I slow down the car seems to slip into a higher gear and speed up. It is worse when the air conditioning is on.
View 30 Replies
Seems lately when driving up a long incline the Trans seems to slip back to third gear from overdrive. I watched the tach and it jumps up like it's went to another gear. But goes right back into overdrive. It will keep doing this as long as we're under load, like going up an incline. If I put it manually into 3rd and keep it there it won't do it.
We went on a long trip last summer and it kept doing it and it threw a tourque converter code. I can't remember which one tho. I did a drain and fill and it made it better but it's doing it again. We have 167,500 miles on it. I was told by Hyundai that it would be around $2800 for a rebuilt tranny. If I was to need one. Don't think the TPS would cause the shudder right? Seeing it doesn't do it when I keep it out of overdrive.
View 4 Replies
Drove the wife to work this morning. The turn off into town there was a lady stuck so I pulled over in the drifts. After putting in back in gear I had to get on it to get out of the drifts. Snow was blowing over the windshield, and I imagine throughout the engine bay.
After that it felt like it stayed in 2/3rd gear. I'd hit the pedal and it would redline and sort of accelerate jumping in and out of gears. So i slowed down to a stop. Accelerated slow and it was ok but when I got more on the pedal it would feel like it was slipping. Once I got in the driveway, she idled for about 15 mins while I shoveled out my spot. Once putting in gear again I had to rev it up for it to move.
Also reverse, had to rev it up to move it.
View 2 Replies
I own a 2002 W8 passat b5.5 that had issues from the used car dealer i had bought it from. I had 2 new motors installed over the period of about 13 months . The first motor had a bad torque converter and seemed to also cause my trans to slip. I am not sure if that is the direct cause of the trans slip going from 2nd to 3rd gear. The second motor dropped 4 valves in the cylinder "3" and cracked the starter. I had all the work done by the VW dealer that i used to work at.
As of today i seem to hear a knocking from idle to 5,000rpms, which is the highest ill push it. Now I know that a lot of of the W8 had issues with the torque converters. my current engine has just about 4k miles on it and I know vw warranties this motor up to 12k miles. That is not my concern, my concern is why do these motors keep failing under normal every day use in my particular vehicle?
View 2 Replies
I just bought a 98 f150 about a month ago from someone. The guy i bought it from said the tranny had been rebuilt about 4 months prior and i have the invoice proving it. I have lately noticed a hard shift from first to second gear, all other gears shift perfectly, but on my way from work toady the tranny seemed to slightly slip out of gear(in other words the rpms didn't shoot up, just loss of power) when accelerating from a stop light, and then it seemed to catch and started shifting ok. my question is given these symptoms is it possible that i can make this tranny last a little while longer or is it about to quit? any possible causes?
View 4 Replies
Sooo. As I accelerate it feels like my rear gear box is slipping or grinding? idk but its getting progressively worse.
View 13 Replies
My passat transmission is really starting to slip now. I have found a used transmission at a reputable salvage yard with 84,000 on it and its the same trans code and was told it shifted fine before they pulled it. I was just wanting to know what seals i should replace in the new transmission if any. I presume that with it being at a salvage yard all the fluid was drained from it so another question I have is how much transmission fluid should i buy when i do the swap not sure if 5 quarts is enough.
View 1 Replies
Every once in a while (maybe once a week) I notice that my transmission will slip (fails to engage for about half a second after hitting the throttle). Usually this happens after I have slowed down to almost a stop and then accelerate. The last time this happened I was on a slight incline (maybe 4%).
Is this something to worry about? Any easy way to test if this is an indicator of a big problem coming up down the road? The car has about 130k miles on it now and the transmission fluid and filter was changed at about 90k, the fluid level was checked by a VW tech so I assume it is correct.
View 3 Replies
Could my brake issue be related to my transmission problem? Neither are constant. Brake problem= sometimes the brake pedal feels hard, like there's no power brakes (I drove a car once. ..looong time ago. .. that had no power brakes or steering) but it will kick in after a short distance. Transmission prob= seemingly unrelated, is a problem shifting from 1st to 2nd gear. This has happened maybe a 1/2 dozen times, the first time and mostly when in heavy commute traffic and when going between 1st and 2nd gear because of the slow commute speed, but also at other times when not in lengthy slow commutes. When it doesn't shift, the odometer doesn't work (shows only dashes) and an engine light comes on (the sprocket/gear looking one). Usually the transmission will eventually shift and the light goes off.
I read that the brake problem might be a vacuum hose problem? Something about a booster? Is this dangerous? or is it like having a car w/ no power brakes? Going to have my transmission looked at this week. Read on another site about dropping valve seats on this year car. If there's a major transmission problem, I'm wondering if it's worth fixing? I changed, timing belt, water pump, front and rears brakes, tires. 143,000 miles.
View 1 Replies
My 08 has been getting poor mileage for the past 3 weeks or so ..... I tried a "push the power button and trip reset shift to reverse to eliminate the backup beep" mod and it did not work. However I find now that I cannot get my MPG average above 42. When I tried the mod the odometer went immediately to all bars and then the bar indicators went out one by one until the regular odometer reading came on .... I'm wondering if doing that also set the car into another "mode" where the tranny will not shift to a higher gear???? So symptoms are constant engine running when cruising to a stop and after 20-30 seconds the motor will shut off .... and while driving on the highway the engine will pick up at least 1000 - 1500 rpms just by adjusting the accelerator a smudge .....
View 19 Replies
We currently have a 2003 Honda odyssey with about 119K miles. About once a month the transmission does not want to change between 2nd and 3rd gear causing it to rev very high. The only resolution is take your foot off the gas until its back to an idle state. Now I have read that these transmissions suck and have a bunch of problems. We are driving long this summer and we need a new trans. Last year when we drove to NC the car started to buck and rev really high when on cruise control for awhile. not sure if its connected but it was not fun.
View 19 Replies
79 F150 400/C6 2wd. Loss of reverse and it doesn't want to stay in high.
Strange thing happened today. I took my truck on it's longest test drive since rebuilding the transmission. It was about 25 miles. I got to the junk yard just fine and it was running just fine when I left. I went through a drive through to grab a burger and headed home. That's when it started acting funny. It shifted fine 1st to 2nd, then 2nd to 3rd, but it wouldn't stay in 3rd. It would shift into high, but the slightest bit of throttle and it would shift back into 2nd and eventually got so bad that it just stayed in 2nd, so I had to return to the town I was leaving.
I drove to an autoparts store nearby. I decided to move where I was parked and when I put it into reverse, nothing was there. It rolled back. I drove it to the new spot and called for a tow truck. Weird thing is that reverse worked just 10 minutes earlier when I left the junk yard. When I got it home 2 hours later, it backed up under it's own power. I let it cool down completely and took it for a test drive and it drove perfectly. I have a few theories or questions:
Kickdown rod: Can it be in such a position that it could take away reverse? I would assume that if the spring wasn't returning it all the way forward that it wouldn't have shifted from 1st to 2nd properly. I ask this because I am not using the Holley spring mount and I'm wondering if the wrong spring set up allows the kickdown to be partially activated.
Fluid: What fluid are you suppose to use after a rebuild and what fluid can't you use. Mercon V says it supercedes earlier fluids, but is that wrong?
Am I wrong to assume that if fluid was the problem that I would have had problems with 1st and 2nd?
Cooling: What are signs of hot fluid other than smelling it. Once again, assuming I would have problems with all gears if fluid was too hot.
My guess is that something is sticking in the valve body, but before I drop the pan and pull out the valve body, I want to make sure all other avenues are exhausted.
View 14 Replies
I recently purchased a 2004 Excursion Limited v10 with 129,000 miles.
It has developed a strange sound only when it is shifting to the high gear where the tach drops down to abour 1500 rpms.
It sounds like a 'whump' momentarily, but doesn't seem to be slipping after that. I don't know if the tranny fluid has been changed, although it looks clear on the dipstick.
One mechanic said they would not do a transmission flush on a vehicle with more than 75,000 miles because they didn't want to be responsible for tranny problems caused by doing that. What's going on?
View 9 Replies
I have a 99 F150 4x4 with the 4.6 Motor approx 150000miles. Transmission went out so I decided to try and replace it...
New/rebuilt tranny went in with no problem but something is not right. It will drive but seems like it is stuck in high gear and bogs the motor down. It is giving me error codes P1747, P0750, P0755, P0743, P0102. All the wiring harness is in good shape with no burns or other noticeable problems. Somehow the transmission isn't reading right?
When I bought this rebuilt transmission I was told it was set up for 2wd but he would convert it for 4wd. The only difference i noticed with the new tranny is the shaft coming out of the tranny, where the safety neutral switch is, has a diamond shape instead of the oval shape that connects the shifter cable. No big deal i think, just had to buy a new link for the shifter cable with the diamond.
Also on the passenger side of the tranny there is a nine pin plug. My wire harness from the truck has one pin hole that is opposite of the tranny. Not sure why. Do I need a new harness or wrong tranny?
View 1 Replies
