About half the engine is thin coated in oil, At least that's what it appears. It seems as though it it coming from the oil cap, and some long bar looking thing also on the top end of the motor. Is this a dealer visit about to happen? How bad is it at this point and should it even be driven??
View 21 RepliesAccidentally dropped a thin wire to the left bottom of the engine bay, Will this cause any harm to the engine?
View 1 RepliesOn my 2001 Passat the clear coat is peeling in the thin gutter area between the roof and area above the doors. Its only on the passenger side.
View 2 RepliesFirst off let me say I love my TDi for everything I bought it for...fuel economy, space, ride comfort.
I've noticed the wind noise before but had never taken a drive more than 30 minutes.I just took my first 300 mile road trip and REALLY noticed the EXCESSIVE wind noise.
I traded a 2010 GTI and its weather stripping was more full and produced a much better closed door seal and I never once had problems with wind noise in the 2 years that I owned.
So we were getting the annoying check engine light pretty religiously when we got to a half tank or less of fuel. In the trouble shooting I guess maybe there was a bad ground or something that required a little work then they told us the the intake flap motor was bad. Or at least was not returning the correct values.
So they ordered a new one and replaced it on Friday. I was looking at the paperwork, seemed like a fun job, pull the intake manifold, replace the part, put back together.
In the end, the experience with Emich VW in Denver was great. The service writer was awesome and you can even pick a tech to work on your car. I think that's a fine idea.
So I was washing my car today..... first wash since I got it.
Any ways so as I was drying it and finishing up ready to clean windows, i noticed my rear window is like half smooth (normal/perfect) and the other half is like kinda dusty/rough feeling look. I don't know how to explain it, i tried windex, rainx cleaner, bug and tar remover. nothing works....
What it is? and how to get rid of it?
I have a 2009 Hyundai Santa Fe, and I don't really know what the exact term for it is, but the plasticy/rubbery coating on on the window sill inside the cabin is rubbing off from what I assume to be my elbow sitting on it (seems strange).
View 1 RepliesNew owner for a 2002 SC, Made mistake when lowering top to hit trunk button, top has stopped half open half closed Light on lose button is solid red and if pushed blinks red but nothing happens.
View 14 RepliesWhen driving my car it will rattle and its been getting worse over time... it sounds like a thin metal such as tin. I've already been under my car a couple times and can't find anything.
View 24 Replies02 Camry with rear disc and drum in hat for the parking brake.
i removed the rotors when doing the pads and found the parking brake shoe to be pretty skinny. Unlike regular drum brake shoes...
Then checked some pictures in google, i appears that parking brake shoes are by design pretty thin?
Installed four Gruven rear adjustable control arms and during a visual inspection noticed thin oil film starting to run down both rear shocks. Doesn't surprise me as one of the previous owners installed them minus the rear perches. Anyway, suggestions on replacing just the rears? Cannot find KW replacements, if they even exist. They should but dealing with KW in the past it would not surprise me if they said I have to purchase an entire new set up. Koni Sports? No likey Bilstein.
View 7 RepliesNew to VW and to the Vortex. Last night I leased a 2012 Passat V6 SE, which is my first-ever DSG equipped vehicle. I am getting a significant hesitation on take off and also on rolling starts- almost like the power is being cut for half a second or so, accompanied by a little shudder. After that, it goes like gangbusters with fast and smooth shifts.
I understand the DSG functions differently than a conventional auto, but the delay is enough to affect my judgment in terms of pulling out into traffic. My salesperson told me that "they all do that" but I don't recall the issue in the others that I test-drove (may be due to limited driving time, last night was my first extended trip with the car). I also don't recall reading about this issue in any of the reviews of the V6 Passat.
My car has been acting up lately I don't know what's wrong with it but everytime I turn it on the sun roof will open half way I don't know y or sometimes interior lights wont work or ill have trouble opening the gas tank ... but the worse is that it just started raining a couple days ago and now my sun roof started doing, why?
View 5 RepliesI have a 2004 solara and I wanted to know what are some signs of a blown head gasket. My car doesn't overheat, there's no milky color in my oil and my coolant hasn't gone down or leaked. Reason why I think I have a blown head gasket is sometimes when I start my car (first start of the day) white thin smoke comes out of the tailpipe and then fades away. There's no smoke when I drive or rev the engine. I've had a few people tell me it's a blown gasket.
View 5 Replies2000 Passat windshield was replaced yesterday by an independent service station after being hit by a rock on Rt 22 in New Jersey. The new windshield is made by XYG (Made in China). The lower half of the windshield has incredible distortion -- looks like a fun house mirror. I've never had any kind of problem like this with any vehicle I've ever owned. I will, of course, call the repair shop tomorrow morning.
View 1 RepliesYesterday, I tried to use my rear window roll-up sun shade while parked in the hot sun, pulled gently up on the center bar, and the RHS clip ---which rides in the tracks along the C-pillars---cracked in half!
08 Passat Owners, the rear roll-up sun shade (NOT the rear door shades) on your car is very fragile! VW uses some kind of lexan plastic molded insert which fits into the tracks. Any out of plane stress on the fittings will damage them, rendering the entire shade useless. Luckily my dealer had a new fitting in stock and the repair was made in less than 10 minutes.
I was checking the oil this morning before getting ready to drive (for an hour) to the in-laws for Christmas, and the Effing orange plastic dipstick tube broke about halfway down. Now I'm afraid to drive for an hour at highway speeds, for fear that a lot of oil might come out of that compromised Effing orange plastic dipstick tube part -- would you all agree that I should not drive the car? Figures this would happen on Christmas Eve when nothing is open.
View 6 RepliesI was checking the oil this morning before getting ready to drive (for an hour) to the in-laws for Christmas, and the Effing orange plastic dipstick tube broke about halfway down. Now I'm afraid to drive for an hour at highway speeds, for fear that a lot of oil might come out of that compromised Effing orange plastic dipstick tube part -- would you all agree that I should not drive the car? Figures this would happen on Christmas Eve when nothing is open.
Effing orange plastic dipstick tube!
Maybe I am running out of my beginner's luck. Recently when I did the second oil change at 10K miles, I placed the drain pan without taking into account the fact that the oil drains partially sideways. The oil stream ended up splashing off the edge of the drain pan and made a mess. Then I did not withdraw my hand fast enough when unscrewing the oil filter and allowed a stream of oil running down my arm and staining my new shirt. The I filled the new oil filter too full and had one more spill when installing it.
About two weeks later I found there was a very thin coat of oil at the bottom of the oil filter but no drips either on the filter or on the ground. I checked the oil level and it was the same as before. I checked the filter tightness with a torque wrench and it was also as tight as before. I wiped the bottom of the filter clean with paper towel. Now about another two weeks passed and a corner of the bottom of the filter is coated with oil again.
I am thinking maybe it was just the spilled oil gradually making its way from the (outside) top of the filter to the bottom? If there is a leak then I should get at least some drips, not just a thin film every two weeks, right? I also thought about untightening the filter and then tighten it again but I was afraid of large amount of oil coming out, would it? Also I had carefully checked the o-ring and wiped the flange clean before installing the filter and there are so many threads to screw the filter on - it is hard to imaging the filter would not seat correctly.
98 AEB just rebuilt the engine completely, put a K04-15 turbo on it along with a FMIC and a forge diverter/BOV. Everything runs great idles great. when i try to get into it it bucks at 4500+ rpm. when i baby it she runs great smooth sailing. Is this a fuel issue?
View 16 RepliesI'm pretty new but we have an '02 Passat (68K miles) that has been pretty trouble free until lately. I'm losing about a 1/2 quart of coolant every week to 10 days; just enough for the coolant light to come on. The car never overheats and the oil looks clean (not milky). But I can't find the leak . I do see some dirt and grime build up on the front of the engine as well at the rear of the engine near the tranny, but nothing definite..
View 19 Replies