Noise from the rear heard at low speeds. Worse in reverse. Sounds similar to the post from AMI for the front suspension because it can also be heard pushing car up and down, jacking it up, and rocking back and forth while tightening lug bolts. Installed ST Coils in April. 64,000 miles on my 06 2.0t....
View 8 RepliesOK here's a new one (for me anyway). My Reg started to produce a squeaking noise from the chassis. I can't tell exactly where its coming from (yet) but it seems to occur mostly at slow speeds. I can reproduce the noise by driving over a speed bump or making a slow speed turn. I suspect an exhaust hanger as it seems to happen front and rear. I cannot reproduce it by bouncing on the corners of car though.
View 3 RepliesI'm having horrible squeaking/creaking noises coming from the front drivers side area of my car. I can hear it inside the car with windows up or down. Not sure if you can hear it from the outside or not. It is only when going over bumps or uneven road surfaces at low speeds. If I'm even going like 40mph and there is uneven surface I don't hear anything. It's 85 degrees today, and I notice it has gotten worse with the hotter temps. I just purchased the car a few months ago when it was still winter, and only recall it gradually doing this as the weather has warmed up.
The weirdest thing is that my previous sunfire (also a 2002), made the same exact noise, but never did get it checked out because the head gasket blew and I got rid of it. I tried pushing on the front end while it's parked to see if it makes the noise, but I didn't hear the slightest chirp, unless I'm just not strong enough to give a good enough push. What could be wrong? I don't wanna throw a whole lot of money into it not being sure what it is, and I have read a lot of horror stories of mechanics trying to pinpoint noises and still not being able to find the culprit thousands of dollars later. 2002 Sunfire GT....
Rear end Suspension noise, '13 Santa Fe Sport 2.0T? I purchased a new '13 Santa Fe Sport 2.0T in Sept. 2013. Shortly after I noticed the rear end of the car creaks/squeaks when the suspension compresses thru it's travel. This happens when driving over tall speed bumps at 2-3mph or into/out of steep driveways at 2-3mph. Rear end noise/squeak at anytime?
View 49 RepliesHaving issue with body squeaking ? . I am getting a squeaking sound coming from around the passenger rear door /body area of my 2010 Passat. Car has 10K miles and has been doing this since around 6K miles. Not noticeable unless going over uneven pavement or railroad tracks but it is annoying. Never had any body squeaks from a new car lite this. Have not been to the dealer with this issue yet.
View 6 RepliesStarted up my car this morning and drove to the gas station. I had the car on low fuel, got the low fuel light last night but didn't have time to stop by a gas station to fill up. Anyways after I did finally fueled up this morning, I pulled out of the gas station and a very loud squeaking noise which sounds like metal on metal occurred. The noise is coming from the rear, but it's really loud, nothing I have ever heard before.
I will mention that I have Koni coilovers installed, tried to peak under the car and see if something broke or came loose but I was unable to see anything since I am sitting pretty low.
I live in Chicago and this morning was very cold. I am trying to figure out what my issue could be. I called up the dealer and he told me to drive it around for a bit and see if it goes away. Another guess would be that something got stuck between the rotor and the break pad. I have the stock break pads. What could it be?
We have an 07 Jeep Compass, 2.4L, 4WD. About 3 months ago we started to get a creaking/squeaking noise out of the rear suspension. First time I looked at it I found a lot of rust on the calipers and rotors, so new calipers, rotors and pads. Got quieter for a week or so, then it started again. Put the rear up on jack stands and pulled the wheels again. Used a 4' pipe to move the suspension up and done. Had a little bit of noise, but I could not pinpoint the source. Soaked all the bushings with light weight oil and put it back on the road.
A little better for a day or so, but still creaking. Had a problem with one of the new pads (the latest friction material, no abestos, no copper), so back on the stands and change the brakes again. Same thing, quieter for a day or so, then back to creaking. It does this at slow speeds in parking lots. Don't really hear it on the highway. Took it to a dealer for state inspection and told them find the squeak. Claimed they could not hear it.
My daughter drove the mechanic around, no noise. 5 miles after it left the dealer it is back. There is a TSB for parking brake cables with a boot failure. Checked our over the weekend and boots are good, cables are not rubbing. It seems if you fully extend the suspension by jacking it up, that makes it better for a day or so, then its back. Sprayed every joint with Lithium grease last time.
Installed a set of ultimos about 2 weeks ago. Replaced everything. Control arms, ball joints, mounts, bushings, pinch bolts. And I'm hearing a squeaking noise in the rear. Just started noticing it Saturday after we had a very hard rain.. Could it be from them being wet?
View 4 RepliesJust came back from waterfest did about 200 miles since I changed my timing belt I did the complete package tensioner roller etc got home and I have this squeaking noise like crazy stops and goes stops and goes in and out every 20 sec look at the video what is this what should I do can I drive it like this.
View 3 RepliesI have a 1998 passat 1.8t it has 160k on it. But recently I noticed that when i sit down in my drivers seat it sound liek there is a loud squeak coming from the back of my car. Whats going on.
View 4 RepliesI am hearing a squeaking noise by my right rear quarter panel inside the cabin. How to safely remove the panel. I tried searching but the instructions were vague.
View 3 Replies2004 Ford Explorer4.0140k miles... For about 3 weeks or so i have been having this squeaking noise similar to the noise you hear when your breaks are worn out and you need to replace them. It sounds like it is coming from the right rear tire, i have changed all breaks all the way around and today i finally changed the rear passenger caliper thinking that it was causing the noise but it is still there. I am also driving on my spare which happens to be the same size as my regular tires it just does not have the rim on it.
I also found out that prior to changing the rear passenger tire it was wobbling and i did not know till a friend pointed it out, the rim does have a really minor dent but i am not sure if that was causing it to wobble or if the wobble is what caused the noises to appear. I have been driving the car for about 3 months and it started 3 weeks ago. There is also a clicking noise that i hear but i cant point out if it is coming from that side of the car, i can only hear it when i am driving slow.
Also the squeaking comes and goes, it is not always there and when it is there and i apply the breaks it is still there. I have done some research and a lot of people have a similar problem but the noise will go away when they finally apply the breaks, my noise still remains even when breaks are applied. What it can be, i did a little more research and now i am thinking it can be the ujoints on the driveshaft?
Here are a few pics of the dent i was talking about on the tire, could this minor dent cause the tire to wobble.....
Vehicle: 2011 Toyota Matrix XR 4-door hatchback ... A few days ago I noticed that my car started making an odd, very noticeable squeaking noise. The noise is coming from my rear left-hand wheel. It's audible from outside the car, and from inside with the windows down.
The wheel makes a squeak each time it turns, so the frequency increases with higher speed. It's audible from ~15km/h, below which the squeak is barely audible, up to ~70km/h, above which I can't hear it any more, maybe because of wind. It makes a slightly different kind of squeak from the same spot when I'm backing up. There is no other noise of any kind (nothing unusual is heard with the engine on, and the car stationary). There are no other problems at all with the vehicle. It's been about 4000km since my last oil change, I have that coming up soon, but I doubt that is the cause of this, since it's coming from the wheel.
What I can do is take off the wheel and take some pictures of the wheel and breaks to show ....
I have a squeaking noise coming from my rear driver side tire. I changed my brake pads and one was missing. All it had on there is what looks like a shim. ( pics below )
After finishing the job I drove my car and the noise continues. It's mainly when I'm in reverse. Has any one else had this problem? My car is at 50k miles.
This bad squeaking, loose rattling and (sometimes) banging noise from the left rear started happening about a couple weeks ago. I've removed all interior panels, even the exterior bumper thinking there was something loose and nothing. I suspect as a last resort it has to be the suspension despite the car having only 17k km.
What is strange is the rattle increases in sound volume and occurs more often the longer you drive and also if temperatures get colder.
In other words, if I have the car parked in my garage overnight (slightly above 0 C) and immediately drive next morning into sub-freezing temps and on bumpy roads, you don't hear it. But after 5-10 minutes of driving, you start to hear it and gets louder and more frequent.
Searched other threads and some have reported the shock as the problem for 2010/2011 models, but none had any sound or video to compare.
The video shows how bad it is : [URL] ....
My car's rear suspension bushes are getting torn and are making squeaking noise in bumps. I am able to get bush for trailing arm and stabiliser bar. My dealer says that i have to replace the whole knuckle assembly as the bush for that part are not available separately. Is this true or the dealer is trying to earn some quick bucks?
View 2 RepliesAbout a week ago I went over a dip in the road at about the speed limit and didn't realize how bad it was. Since then my rear end has been making a creaking/squeeking noise while driving or pushing on the car side to side. The struts seem to be ok, there is no bounce in the car. What this could be? I was thinking some sort of bushing somewhere?
View 16 RepliesI just got a 01 passat the new body style got 197k on it and the suspension at front is making a squeaking noise like an old mattress, what that could be?
View 1 RepliesI have a 98 passat sedan... I notice whenever I turn the wheel left I get a squeaking noise, like plastic against plastic. I saw somewhere else someone mentioned the power steering fluid, but I checked that and it was fine.
View 1 RepliesSo my saga continues with my rear brakes on my 99 Suburban - had a glazing problem that was eventually discovered, glaze knocked off old pads and then glaze came back again. So we replaced the rear drums and pads. A month and a half later I get an irritating squeaking noise.
Noise - when the tires are rotating they make a light squeaking noise, a rotating/pulsing squeak; when the brakes are applied they make a lower pitch squeak and if I apply just the right pressure on the brakes I can get the noise to go away (while also giving it gas to keep moving).
Last night I inspected the rear brakes and found an excessive amount of dust/grime on the pads. The drums we fairly clean. The pads had a heavy layer of rust/grime on them. When I ran my finger over them it left no mark on the pad because it was so heavy, but my finger had this sooty grime on it. The rust covered about a 1/3 to 1/2 of the pads (each pad had a different amount of coverage).
Everything is brand new and I'm not sure what is causing all the dust coverage.
I took my rear springs off for some cleaning and lubing because they were making squeaking noise on hard acceleration, but I forgot to note which direction the springs should point...
I kinda remember the top and bottom. If I got this right, the end with a smaller loop is on the bottom.
Is there any difference between left and right springs? Also, the spring mounting pads is not symmetrical. Which way are they suppose to face? Does it matter?