Passat (B6) :: Rotational Shusshhh Sound When Doing A Sharp Turn Left Or Right
Oct 14, 2009
We have an '07 wagon that recently started exhibiting the following: When doing a sharp turn left or right you can hear a rotational shhhhusshhhing sound... shussshhh *pause* shusshhh *pause*.. etc. Its obviously linked to the front wheels since going straight does not produce the sound. Brakes and rotors have 13k on them; dealer has checked out the car and says everything looks good and the bearings are fine.
Could this be CV joints or something similar? Where to look? This is not a thud thud thud (which I have heard before when another car of ours needed new cv joints). Safety is main concern, don't want bearings freezing while driving..
View 4 Replies
Advertisement
I've had my R since late mid-summer, and one of the first things I noticed was this clunk sound when reversing into my parking spot and when making an aggressive sharp turn. Usually Left.
After reading multiple threads on this topic, I came to the conclusion that it was my sub-frame and the bolts need replacing. I got in a GB for the tyrol subframe stiffening kit after reading some good reviews/responses.
Today, on my day off, I finally went to a mechanic to get this installed. I just changed my mechanic, and this was my first visit to the guy hes had over 10 years experience at vw and just opened up his own shop. He did a great job, torqued the bolts to spec, made me drive around, do some pulls in 2nd and 3rd gear, reverse forward etc.
So hes about to pull the car back in to retorque and.... CLUNK...
Get in the car, reproduce the sound, get the car back up on the hoist... and at this point I'm expecting the worse. He takes my control arms off, checks the end links...
Brings the car down, and the clunking sound is louder than ever. It was the weathergaurd. When I turned on the wheel it was pulling it out and when I straightened the wheel it was popping it back into place, making a big clunk sound.
This was the exact sound that I was hearing, thinking it was my subframe. The bolts that came out were not stretched or bent out of shape like the ones you see in other reviews. They're actually in great shape. I'm glad I did the Tyrol kit and do not regret it, and I definitely feel a difference when I went into some aggressive turns.
View 9 Replies
2004 PSD 4x4 72k. I thought I would be proactive so I bought the front ball joints and have plans to install them but recently I starting hearing (and feeling) a clicking sound in the front LEFT when I make sharp turns to the left and hit small bumps now and again. I jacked up the front end and am able to get 1/4" of movement front to back (top to bottom so not steering) in the wheel.
I narrowed it down to the hub. I took it apart and it is most likely a sealed unit so no adjustment is possible....that I can see.I pulled out the locking hub and got as far as I can to know there is not an adjustment. Need to confirm that it indeed is a sealed bearing and if so what are the part number(s) I may need to repair it.
View 14 Replies
Just had a new issue pop up - sometimes, when making a sharp left turn when the engine RPM is low (going into driveway, turning at a stop sign), the engine will suddenly die. It seems to be running fine otherwise, it does not idle rough, and the idle RPM is around 600-700. It never dies on the highway or higher speeds, yet anyway.
I do notice that my power steering pump is making a little noise. It is an aftermarket pump. The steering assist seems to work fine though.
I recently had the spark plugs, valve cover gasket, and a fuel pressure sensor replaced. As I understand it, the mechanics checked the fuel pump and it was working fine.
View 3 Replies
I have 35k on my 2009 camry, (past warranty). All of a sudden in the last few days when I make a sharp left turn (like into a parking spot) I hear a grinding noise from my car. Not really a full on grinding, but like a quiet fart can muffler noise. No issues with alignment, driving straight, or sharp right turns.
View 5 Replies
I have a 2013 Santa Fe with a 2.0T. A couple of days ago, I heard a squealing noise when I make a sharp turn to the left, like maybe a power steering belt would do. This has continued and I have also noticed that the AC fan almost completely dies at the same time. Car has 6,000 miles.
View 3 Replies
When I turn left sharply i hear a rubbing sound. I thought it was just tire rubbing but I am not sure. What else could it be? The car is stock height stock everything. It just got new brakes and tires recently. it looks like something is rubbing the cv boot....
View 5 Replies
So four lanes, divided, with a left turn lane, five lanes at the intersection. I'm down ~15 mph, maximum turn speed and one car is just clearing intersection and and +100 yards from next approaching slug of traffic. Keeping the speed, I make the left turn confident no problem then halfway through turn:
feels like a soft tuck
traction light flashes
already to straighten out
everything normal
This is the second time I've seen this in a year. Pavement dry, 48 hours since last rain; ~8:00 AM so rush hour is on. Before doing some parking lot tests, any clue about how to replicate?
My dashcam SD card did not play.
View 14 Replies
Every time we make a sharp right or left turn the engine on my van stalls. It has to be completely restarted. In the last year we replaced the trans and steering column and had a major tune-up. So far, no one has been able to diagnose the problem.
View 5 Replies
I have a 2006 with 106K miles. Noticed after making a sharp left turn in a parking lot that the Red Triangle came on along with a beep and the message, "Problem" on the touch screen. Started happening more frequently either when the wheel is turning left or if I'm driving straight and the car drifts a little towards the left if I'm on the highway. Today it happened about 6 times. Warning goes off after a couple of seconds.
View 9 Replies
My steering pulls hard left or hard right, and also seems to have a mind of its own when it turns sharp right or left suddenly, as though someone else is driving. It's very disconcerting when you think you're making a left and the truck veers right.
Today I was making a left onto a bridge and truck kept going straight. I almost hit the bridge. I have an 06 Ford F250 Turbo Diesel. What this could be?
View 4 Replies
Took my 2010 Corolla in to have it looked at since it has recently developed a clicking/thumping sound when I make a sharp right turn (it's intermittent, but frequent enough to be noticed).
The shop I took it to said the source of the noise was the CV axle, but that after inspection, they didn't see anything really wrong with it, so they recommended simply putting up with the noise to save money, and to keep an eye on it and replace it if/when it actually begins showing signs of significant wear.
View 5 Replies
I have a 2003 Volkswagen Passat, and I'm having some trouble with it. When I turn the steering wheel, there is a groaning sound both to the left and right. the other problem is when I'm accelerating slowly up an incline and turning the steering wheel, there a type of clicking sound I hear and feel on my accelerator. By the way, it's a V6 engine, Front wheel drive.
View 2 Replies
Here is a video of a blow off valve which gives the sharp "whistle" sound of the 2.0t.. Right now I have the forge full atmospheric BOV...
[URL] .....
View 2 Replies
The other day i noticed that when i make a sharp turn left or right i hear a clicking noise. If the clutch is engaged it clicks and if its not then it does not click. It is also louder when i turn right... I am thinking CV axle!
View 4 Replies
My wife has a 2002 Hyundai Elantra that has a rotational noise coming from the left rear wheel. We just got it back from the shop where they replaced the left front wheel bearing and rear brakes/rotors, and the right/rear wheel bearing was replaced about a year ago. It's a thumping noise that speeds up proportionally to the speed of the car. Normally I'd expect a bad tire or warped rotor, but the tires are relatively new and we didn't notice the problem before we took it to the shop last week (though it's possible we weren't hearing it over the wheel bearing noise they fixed). Is it possible we got a bad rotor, or the shop did something wrong? Or could this be something new entirely (which would be entirely typical for this car).
View 1 Replies
I have a 2007 Sonata 3.3 V6 GLS (CDN model) with 102k km (63K miles). Recently, I am noticing a rotational metal-like grinding noise from the front left wheel / engine area when engaging in hard right and left turns - usually a long looped highway on-ramp or sharp 90 degree turns. The interesting thing is this only happens when I am accelerating through the turns - when I left off the gas and cruise I don't hear it anymore.
On the side, I am also getting a single clunk noise when shifting from Park to Drive and vice versa from the same area (front left wheel) - not sure if this is related (i.e. if this is all related to a failing CV joint or wheel bearing).
View 2 Replies
I have a 2006 Prius (150K miles) with a noise coming from the drivers left wheel. It is a hollow metallic squeak that only occurs while the vehicle is moving. It sounds like the wheel is making brief contact with something metallic at the same point on every rotation. The pitch of the squeak increases with the speed of wheel rotation. It does so while rolling, with breaks and without. The noise gets louder when turning right, and softer when turning left, though it begins to get louder again when the wheel is turned hard all the way left.
View 1 Replies
I have a 2007 Honda Pilot. 65K Miles.
Several months ago, when turning left, regardless of speed, my wife starting hearing a noise. It is not a knocking or harsh grinding noise, but a low grumble (I don't have a great word for it). It's definitely rotational, it doesn't get any louder as speed increases, but it obviously happens more often. It seems to come from the right side of the car, I originally thought it was from the wheel, but just now I had it jacked up and had a neighbor who works on cars look at it with me and now I'm not so sure.
When I described the problem to him, he first thought it was a CV joint, or possibly ball bearing. After a few minutes looking under the hood, he quickly ruled those out. Boots were in great condition, and he remarked that everything seems to be very solid around the wheel.
I thought that noise was a result of weight shift to the right side of the vehicle when making right-hand turns, but we had the car up on two jacks stands placed on the jack braces, turned the car on and gave it some gas with the wheels turned left, and you can definitely hear the noise with zero weight on the wheels or axles. When you straighten the wheel, the noise subsides.
View 12 Replies
Its a rotational squeak, that sounds like its under the cab or possibly left front tire. The truck only has around 25k miles on it. I recently had a 2" leveling kit installed, 35" tires, and rear airbags installed (within 5k miles). I checked the universals and they seem to ok and there is no noticeable clunk. I am hoping its something small.
View 7 Replies
I have a 2013 Avalon hybrid that is almost 1 yr old.
I have recently notice a single "pop" noise that seems to be coming from the rear when I turn right with a sharp turn.
I have looked in the trunk and under the vehicle but I cannot find where it is coming from.
View 10 Replies
