What the random sound is when turning off the car? It almost sounds like a pump is running or a motor for something. Doesn't happen every time, so I can't get anyone else to listen to it. Wonder if it has something to do with the turbo?
View 8 RepliesIt's an odd small electric motor sound. It happens when I get into the car and tonight I heard it when I turned off the car (had radio off) which that one was longer and had different pitches. It sounds like the power seat is adjusting but it's not. It's driving me nuts that I don't know what it is!
View 2 RepliesI am a proud new owner of a 2000 X 6.8l 2wd with the 4.3 rear end .
I have had the truck for 2 weeks now . When I bought her , she ran a little rough but I expected as much after sitting for 6 months ... After driving her home I began to start a massive tune up , because she was acting like there was a miss ... The miss only started after she was at normal operating temp and at first only when at cruising speeds in overdrive on the freeway , it progressively got worse ... The miss became all the time once up to normal operating temp but will do it wether she is in any gear or even park .... Oh and the miss is NEVER at the same time it is always completely random ...
I have changed all 10 coils , all 10 plugs , the PVC valve , and I am changing the fuel filter this afternoon ... Other then that I think I can hear a vacuum leak , but I have tried spraying carburetor cleaner around the engine bay as instructed by a " ford expert " at the local auto parts store and I did not notice any change ... After I install the new fuel filter I am going to fill her full of 93 octane and add a bottle or 2 for Lucas octane boost as well as the Lucas injector cleaner ...
Other then these things I am at a complete loss ! This is my first v10 ford so I am a little at a loss ... Now if this was my wife's BMW 760 or my Lexus IS 300 I would not be having this problem.
This has happens twice so far then the sound slowly goes away why does it do this? Yes my car has oil and i always use mobile1 15w50...
View 4 RepliesHave a 06 2.0T Passat that decided to start making some kind of god awful squeling noise today.. Sounds like it is come from the drivers side underneath possibly.. Funny thing is when you turn the car off it stays on for a few seconds till it runs out of pressure or something..
Car does have 103k on it if that matters..
After parking the car in the garage this afternoon I heard this motor like noise cycling on and off from the rear of the car. It was real faint but definitely noticeable. It lasted perhaps 10 - 15 minutes before quitting. What it could be?
View 3 RepliesI am new to VW. I just purchased 2 new cars on Monday of this week. A 2012 Jetta SE for my wife and a 2012 Passat SE for me. We are loving both of these cars. I have a question though. If my car has been locked for a little while, I unlock the car, open the door, I hear a noise inside the car as if an electronic motor is running. It only last for a second or 2 and I can't pinpoint the noise. It almost sounds like the power seat is moving but I don't think that is it. Hear that noise when are entering your car?
View 6 RepliesThere is a fan noise every 30 seconds in the engine compartment behind the passengers headlight area. Is there a fan motor there? Could it be disconnected without hurting anything? I can't determine if there is a fuse related to this or not.
View 3 RepliesI started hearing loud fan like noise today. It stayed on for a bit after the car was turned off. I usually wouldn't mind lil bit of fan noise.. but this was horrific loud.. I'm guessing I just need to replace the fan.
View 11 RepliesHave a pulsing noise when the HVAC is turned on (see other post about HVAC pulsing noise etc). I've traced the sound to behind the glove box, I suspect near where the cabin air filter is. I believe the blower motor is back there too? How to remove glove box to get to blower assembly...
View 1 RepliesI have a 2000 VW Passat 1.8T Automatic. During a cold start, I notice a rather loud noise like a motor whirring that lasts for approximately 30 seconds. My RPMs also run about 200 higher than idle during this time. After the 30 secs the noise goes away (sounds like this motor powers down) and the RPMs return to normal.
It doesn't happen every time I start the car, just when it has been sitting for more than 4-5 hours or overnight. What this is and what if anything I should do?
Just got back from the supermarket. Unloaded groceries and my Passat wouldn't start when I went to park it. Turned the key and it just makes a clicking noise - clock and trip odometer reset themselves also. If I turn the key the car just makes a clicking noise and the lights on the dash all flash on and off.
I am going to see if it starts after being jumped in a few minutes.
Other potentially useful info - I was testing a radar detector for work the other day and it has a battery voltage meter. It was reading in the 11.0 - 11.6 volt range. Is this too low - just wondering if the alternator was not supplying a sufficient charge. Not sure how accurate these are. The battery was changed around a year ago so I'm sure it's not the battery. I am assuming starter or alternator.
Every morning for the last 3 days I've gone to go warm up my car and each time i turn on the car only from a cold start up i hear this loud high pitch noise from the motor. If i turn the car off and restart it. It goes away and the car is at perfect idle. what is this and do i have some serious problems?
Is this true? If it's only on a cold start up, and then it goes away during normal driving, you have no need to fear....that's the Secondary Air Injection Pump that turns on during cold starts, and the plastic hose just needs to be replaced.. If so where is it located so i can replace this hose.
So now that it is winter, I have started to use the heater in the car. It works fine for about 10 minutes until a loud high pitched noise starts. Sounds like something is grinding. Any clue what it is? Is so, how to fix it?
View 2 RepliesSo the problem seems to be the climatronic system is constantly trying to adjust the temperature but the problem is that the motors or servos are making an annoying ticking noise as it adjusts. I already had the blend door assembly replaced but the noise is still there. My Touareg has climatronic and doesn't make any noise, so don't believe I should be getting this noise in my Passat. Service advisor claims its normal to make some noise since his Passat does the same thing, but I don't buy that. So who has had the same issue and got it fixed properly? What did they replace?
View 7 RepliesMy '91 240 races when turned on when motor cold, colder it is the moreso, especially in Park and Neutral till it calms down It's happening under 60 degrees Fahrenheit and big time under 32. Sometimes turning steering wheel sharply will stop this. Is this ECU? Transmission? Belts? There seems too show excess transmission fluid on the dipstick, by the way lately, which may have been that way from accidental overfill and may not be related t this insane racing issue.)
View 1 RepliesWhen I turn my headlights on idle the motor kills. At higher RPM engine still runs and lights will start to blink.
View 10 RepliesI have a 2000 chevy malibu that has not had a/c the past 2 summers. I'm trying to diagnose what the problem could be. When I start the car and then turn on the a/c by pressing the button in the car nothing seems to happen.
When I went to look at the compressor motor I could see that the clutch is not engage and the middle of the compressor is not turning. What to check without taking to a mechanic??
I have a 2002 Ford Ranger with a 3.0L engine that is having some issues with starting, here is what is happening.
Every so so often when the key is turned to start there is no movement from the starter motor. The battery is fine and all of the dash lights stay on while the engine is not starting. I have replaced the starter with a remanufactured model (possibly a mistake), and also replaced the clutch interlock switch.
I have attempted to change the ignition switch but the replacement I received did not even try to turn the starter (after many tries), like possibly it was faulty out of the box. I am currently using the OEM ignition switch as it will at least turn the starter eventually. I just worry that this problem will develop further at the wrong time.
It started with the blower motor that wouldn't turn off by itself when the truck was turned off. I forgot to turn the fan off one night and woke up to a dead battery. Got my dad to come give me a boost and it would turn but not start and the anti theft light in the dash was blinking fast.
Later in the day I got another boost and it started right up.
This was yesterday... after the last boost and startup I went and got a few things, stopped to get gas... started back up fine each time.
Last night I was greasing zerks and making sure everything in the front end was nice and tight when the abs module started clicking... and the anti theft started blinking and truck wouldn't start. Left it alone and went to bed.
This morning I boosted it and it started fine. Later in the day it wouldn't start again because of the anti theft. Gave it 5 minutes and it started. Stopped to get gas... wouldn't start (anti theft)... started after about 5 minutes.
On the way back home... it's been making this 5 beep, pause, 5 beeps, pause sequence so I pulled it into the garage and turned it off now the locks are locking/unlocking by themselves randomly, the beeping is on and off, anti theft light blinks for a few minutes then goes away only to come back...
I've been told to remove the fuse box under the hood and check to make sure all connections are clean... I've searched and seen possible solutions ranging from a dirty connection to needing a new GEM module and apparently sometimes just a low voltage situation will cause our trucks to act nuts...
I have a 2000 F350 with a 7.3 I have just set a brand new motor in this truck with everything in it new including the transmission injectors are 175/146 from Thoroughbred Diesel. The engine is Bored 40 over studded heads return regulator system as well as a pre pump filter and a javelin and Hutch mod on the tank. When we went to start this new motor the motor turned over and sounded like it was going to fire off pretty quick but instead I'm just getting white smoke and lots of it.
I failed to mention that the injectors are single shot vs. Split shot and then I did have the programmer Tuned to these injectors through thoroughbred there is no fuel in the oil no water in the oil no oil in the water everything seems to be good all the pressures seem to be good and at this point I am lost no one that I have found in the area, where to begin. Seems to me that this is a loading up issue and it seems to me that the only thing that could be causing this would be programming but I don't know.