Passat (B6) :: Lumbar Support Can't Deflate?
Mar 27, 2012
I can move the lumbar support up or down, but I can't deflate it & it's quite the pain. First off, is it an air bladder or a cable? I could really care less if it ever works again as long as I could get it to relax/deflate, is there a cheap/easy way to do it?
View 5 Replies
Advertisement
I just picked up a 2011 Golf TDI a week ago and so far, I love it! I have about 600 miles on it now and I have noticed that the driver's side lumbar support is very stiff to turn compared to the passenger side. It is also making a creaking noise when it is adjusted and I can feel the seat compress slightly when I put pressure on it (say, when I shift gears or move positions) and it also makes noise when doing so.
Just wondering if this is a common problem, if there is an easy fix, or should the dealer take care of it. My thoughts right now are to take it right back to the dealer and let them deal with it.
View 6 Replies
I have a '98 F150 front 60/40 seat going into a '77 shortbox F100. I've searched and found a lot of info on repairing a lumbar support but nobody seems to mention how to get the stupid off. I don't want to break anything but I can't see any screws or clips. Does it just pull off with force?
View 1 Replies
The manual comes with R32 shows a seat lumbar control on the side but obviously not on R32. Is the lumbar support adjustable on R32? I remember when I first sit in the car I feel the seat is pretty tight (in a good way) but now not as tight, maybe I am too used to it now.
View 9 Replies
Do cold weathers cause tires to deflate? On my way to school today I noticed the tire pressure light. I've had the car only for 3-4 weeks. Never had any issues with it.
View 19 Replies
I was messing with the drivers seat trying to fine tune it for comfort when I noticed the power lumbar rocker switch doesn't do anything. I looked at the glovebox manual for seat fuses and came up confused - everything else but what I was looking for...where is the lumbar fuse, or any seat fuses for that matter?
View 14 Replies
My explorer 98 seat lumbar does not work. When i push the switch i only hear a motor noise and nothing happens. How to fix that?
View 6 Replies
When using the power lumbar adjustment in the seat back of my wifes 08 eddie bauer explorer, it stopped moving and I now hear a snapping / popping noise from the seat back. Is there any way to remove leather seat cover to check out what might have come loose or broke?
View 5 Replies
My ford car in not running properly. I have fix my broken cylinder from the car wholesale repair and dealer, but it is now completely broken down.
View 11 Replies
I need to change the all support mount motor of my Camry 2003 v2.4l. but I don't know where find the best model or manufacturer.
View 2 Replies
So I love the SEL on short trips, but I just took my new SEL on a 4-5 hour road trip, and my lower back was killing me an hour in each way, and I'm so surprised. Adjust the lower back support so that it wasn't giving any support seemed to work a little. I'm wondering if it's not the seat but rather the big wheel small tire on the SEL that's doing it? My beatup car was more comfortable on long trips!
View 16 Replies
I have a 2010 RX 350 and it seems like my support bars in the rear lift gate do not support the gate as it used to be. i have to push the gate up each time I open the gate in order for it to go up all the way. My motor is still working fine. How to change the support bars in the RX? I think those support bars are hydraulic.
View 11 Replies
So the story goes like this, my teacher was trying to scrap a truck that he had sitting on his farm so i got it. I've been using it for a DD for the past year and a half and not I'm starting to do rust repair starting with rocker panels. But, what i was really wondering is how involved would it be to replace the radiator core support? Main reason being last time i was under the hood replacing the pass side valve cover gasket i hit it and knocked a hole right through it so yeah I'm thinking is about time to replace it.
View 1 Replies
I'm wondering what the safe limit is for the amount of weight the tail gate can suppport ?
I need to get some 4x8 sheets of dry-wall and instead of leaving the tail gate down i'd rather have it up and support the pieces, but at 50-60 pounds a sheet I'm somewhat concerned about how many sheets the tail gate can support without causing issues.
View 10 Replies
I recently bought an 05 F250 CC SB. One or more of the bed support rails is rusted and the front one (right behind the cab) is bad enough that I can move the bed up and down with my hand. I've read several threads on a few forums about replacing them and I'm wanting to do it myself.
One other thread I read on this forum (link) gives a pretty straightforward outline of how he successfully did it and even gives dimensions for the rails he made. I'm thinking of doing pretty much the same thing, but he didn't mention the gauge/thickness of metal that he used. I read about the Dorman replacement kit, but they don't mention gauge either.
View 11 Replies
Rear lift gate refuses to stay up in cooler weather, cylinders must have leaked down.
View 14 Replies
I am fixing the front of my 2000 Ranger? I need to replace everything from the radiator support fwd. I need to know how to get the radiator support out.
View 2 Replies
Just started to get a vibration in the last couple days. When giving it fuel there is no problem. when i let off the fuel it begins to have a slight vibration as it slows. even does it if i pop it into neutral. took it for a ride last night when i noticed it. wife sayed been going on for a few days. after just a 6 mile ride i crawled under and tried to check the joint but when i stopped i was not on level ground so have tension on the shaft but did notice that the rear joint was warm after just that short of a drive. not hot just warm compared to the other 2. it is a 2004 F250 SD 6.0DSL 4X4
View 2 Replies
How can one tell? V6 heated seats, 16" wheels. Seams like its a glx? Are there more options between the 2?
View 7 Replies
My cel came on yesterday so I immediately took it to get scanned the problem is that my fuel air mixture is running to rich or I have a faulty cc will getting the code cleared solve my problems or what needs to be done to solve the problem....
View 5 Replies
I only get 265 miles each tank. I should get at least 300 miles. I have a clean air filter, new plugs, ran injector cleaner through, no check engine light.
View 24 Replies