Passat (B6) :: Instrument Cluster Coding Causing ABS Module To Throw Codes
Jan 4, 2014
I'm set on having the European parking light feature (when the car is parked and you walk away from it). For those of you not familiar with it, by changing the Instrument Cluster coding from a 2 (USA) to either a 1 or 4 (UK or Great Britain), you can turn the car off, hit the left turn signal assuming you are parked on the right side of the street, and after getting out and locking it the 194 amber front bulb and the LED red rear ring stays on. This aids in traffic seeing your car parked on the side of the road.
Problem is that once you change the country, you get this in the ABS Module:
Address 03: ABS Brakes Labels: 3C0-614-095-C2.clb
Control Module Part Number: 3C0 614 095 S HW: 3C0 614 095 S
Component and/or Version: ESP 440 C2 H015 0004
Software Coding: 0013752
[Code] ....
What changes need to be made in this module to avoid this? The pop-up window in the coding section doesn't say anything about different countries so I'm not sure which numbers need changed.
View 7 Replies
Advertisement
I am looking for the part number for the ABS speed sensor mounted on the rear differential for my 2000 Ranger XL 4x4 3.0 flex fuel model. I am also looking for the name of the part so I can look it up on the ford parts site. while looking I have found these names ABS speed sensor
Powertrain Control Module Speed Control Sensor
I had my truck in the shop and they did a health check, they found these codes po500 - cluster fault and the abs module fault
View 5 Replies
I own a VW GTI 2010. I replaced my abs module from 1K0 907 379 AM to 1K0 907 379 BE which is compatible with Park assist 2.0. I tried to code it with the previous coding with 00 added at the end but it got rejected. Since, then I've been trying very hard to code it.
I've tried at least 20 different coding some on which were provided by "16 D", a member friend in the forum, but they were all rejected. I still don't understand why other people were able to recode their module with the same previous code with 00 added at the end but I cannot. Is there any chart for generating such long coding?
View 2 Replies
Need coding info for 2010 Jetta sedan 2.5 Air bag control module. The part # is 1K0 909 605 AD/004, Component # Airbag VW8R 036 8900. I am using a Vag-Com version 10.6 ....
View 1 Replies
Turned my lights on in my 2001 VW Passat and my instrument cluster lights are no longer working. The area showing MPG and Outside temp is functional but nothing else is. The lights for the radio, fan hazard sign etc are all fine.
View 1 Replies
I have a '13 TDI SE with about 27,000 miles. For the last three months (and especially when it's cold) there is a pronounced rattle coming from somewhere behind the instrument cluster. I left it with the dealer this week, but they couldn't seem to locate the problem. The service writer told me they had to order some foam backed adhesive tape from VW to fix it, but they neither seemed to really know the source or if the tape would correct it. What this might be? The sound is more toward a repeated clicking, but I can't for the life of me find the exact location.
View 11 Replies
I have a 2001 1.8t Passat that won't start. The story starts about 6 months ago with occasionally (maybe once a week) finding the clock and trip odometer reset. Figured It would eventually get better or worse. Then once last week I lost power to the instruments completely when driving, The tach and speedometer dropped to zero and returned to normal in a second. Yesterday on the way to work that happened again several times, but it never effected the drive-ability at all. After work , went to leave and the dash doesn't light up and is dead silent when turning the key even the clock and odometer are blank ,the Traction control light is the only response on the cluser. It won't crank, the power windows and sunroof also won't work. Most everything else is normal, blower motor, headlights and interior lights, blinkers, door locks, all work, radio powers on.
Here's what I've done so far. Removed the negative battery cable to see if a reset would work. No change. Checked every fuse I could find, no bad fuses. Replaced the Ignition switch, no change. Have 12.05 V on the red starter wire in the crank position. After replacing the ignition switch, the radio now displays SAFE --- 0001 and doesn't do anything else (not sure if that means anything). I have reseated all the relays under the hood, and under the dash. No change. Wiggled every part of the wiring harness I could get access to to see if that changed anything. No change.
I'm now expecting the solution to be the wiring to the CCM, the instrument cluster, or the CCM itself. Going to try push starting it tomorrow, If that fails I'll have it towed home and get back to taking things apart Friday night.
View 1 Replies
These last few days I've been having issues at startup. Ill put the key into the ignition and it will just click once or twice without anything happening. Power to the radio and instrument cluster will get distributed but the engine wont turn. Then the other day the engine would turn on for a brief moment but turn off within ten seconds. Whats going on?
View 2 Replies
I have a 2012 F350 XLT that came out of Canada. So of course the speedometer is in KM. (Large numbers are km and smaller numbers are mph). I am trying to find out if I can simply change out my cluster with a mph cluster???
View 4 Replies
I have just replaced the abs ecu and have cleared the codes, thought all was gonna be good but now two code are still coming up they are:
01044 Transmission control module - incorrectly coded
00778 Steering angle sensor-G85
View 2 Replies
Need to know if the little icons on your interior 'dome' lights illuminate red when your instrument cluster lights are on? (Just like the power window and dash vent icons..) Audis do, but I've never seen a W8 Passat at night to be able to tell.
Looking for a pic of your interior roof lighting? (Not the center console one near the sunroof control...that of course lights up and shows icons.) I'm looking for the ones towards the rear of the car.
View 9 Replies
I occasionally drill-down to check on pending codes, and my 2007 Prius likes to generate a LOT of them. Maybe pending codes don't count unless they escalate to an active code that triggers the check engine light.
View 3 Replies
I bought a fob from eBay.. but I couldn't find anywhere the coding procedure.
View 4 Replies
Alright i have a 05 1.8t GLI I just installed a 42 draft designs full 3inch turboback, and a eurojet turbo inlet hose, after I put the stuff on my check engine light came on which I thought was gonna happen and is normal but my traction control light came on as well, the cars running better then ever and pulling harder then ever, but when i hooked it up to the computer I'm throwing 18 codes? Ive triple check to make sure everythings tight and in the right spot? What could be wrong?
View 5 Replies
I just had my car coded for aftermarket HIDs and i have no high beams and a bulb out indicator on. did i miss a step in the VAG coding or will the high beams work when i put the HIDs in?
View 6 Replies
With DRLs enabled and a Euro switch in Auto, I get HIDs, city lights and side markers during the day - no DRL indicator on instrument cluster.. With switch in Off, I get only HIDs, but with DRL indicator lit. In Auto I expected only HIDs as DRL and DRL indicator lit. No city lights or sides.
View 2 Replies
The speedometer, tachometer, fuel gauge, battery meter, temp gauge and idiot lights went out. The car works fine. Dash is just dead. I did a quick look at the fuses in the glove box but it doesn't have the little card to tell fuse locations. So, I can't narrow it down but I don't see any blown fuses.
View 4 Replies
Just wondering how to remove instrument cluster?
View 8 Replies
This has been a wonderful car to say the least. Has about 150K on it and it drives like a champ. Recently the instrument cluster went out, sometimes it will randomly work but 9/10 times it's off. When I used it to jump start another car the instrument cluster began working almost instantly, although this was only temporary. When the temperatures are low as they are on the northern east-coast right now around 30ยบ and lower (shivers) it will work. Why is this? does anything to do with the battery having to work harder?
View 5 Replies
My instrument cluster panel went out. I bought one on ebay and I would like to replace it myself. Is there a step by step video or a diagram that will show me how to take the dashboard off?
View 1 Replies
The instrument panel on my Prius (speedometer, fuel gauge, etc. on the dash) keeps going out intermittently. Took it to the Toyota place and of course the lights were back on.
View 4 Replies
