Passat (B6) :: Installing Foglights Using VAGCOM?
Sep 17, 2007
I know how to install everything and which pins to connect and all that, but do I really need to use VAGCOM to let my car know it now has foglights?? Can I just use a relay light I did on my 03 Jetta??
View 5 Replies
Advertisement
I want to make a few changes to my Prius. I would like to change out the stock headlights for the OEM LED headlights and add the OEM foglights.
I have some part numbers for the foglights and would get them through the dealer. What about the LED headlights? Is there an improvement over the standard headlights? I have read about the "auto leveling" sensor that is mounted on the back bumper, is that something that can be done?
View 3 Replies
Okay, this is my problem. I bought a HID kit for my 08 Passat and did a little searching and found that I need to get into the computer and change the settings to where it thinks I have the Xenon lights already. If I didn't do it, that it would burn my ballast So I spoke to someone who knows about Vw's. Was told to download the software from Ross-tech and instead of paying the $300 for the VAG-COM, that I could get one off Ebay and I would be good to go. But to my surprise, I downloaded everything, got my OBD-II wire but I keep on getting error codes and cant get into the computer to change anything. I have installed and deleted the program, spent hours trying to fix.
View 5 Replies
Need to know if this is a bolt on affair or what possible fabrication may be needed?
View 3 Replies
Putting factory bi xenon lights in new 2.0? Is it something that can be done?
View 11 Replies
I just bought this grill [URL].... and it fits great. However, the grill does not come with a emblem so I was just going to put mine from my 06 Passat on but it is a lot smaller than the opening on the new one. Am I just missing something here, or are there different size grill emblems on some cars? Or is my new grill just messed up?
View 3 Replies
Seems too coincidental to be unrelated. I installed a new K&N filter into my '04 GLX Wagon and 2 days later my MIL light came on. No blinking just always on. Is there a connection between the two? If I swap out the filters will the light go out on it's own or does it need to be reset? If it's not the filter what's the most common cause of the light coming on? Assuming is doesn't start blinking I have read it's OK to drive until fixed.
View 2 Replies
What were the stock radio options for the Passat?
My 98 came with a JVC aftermarket; don't like the look. I consider putting a stock radio back in.
View 1 Replies
I picked up some Megan coil overs with plans to install them today, but can't figure out where one part goes. It looks like a spring spacer. The instructions are terrible and make no mention of what it is. My guess is it goes with the rear springs but...? [URL]....
View 24 Replies
I'm trying to install my leds on the dome lights. The back one was quick and everything but the front dome light cover doesn't want to come off. Only the passenger side one wants to pop out. While the driver side of the dome doesnt wanna budge. It seems like ts actually stuck to the inside of the compartment. It just doesn't wanna pop off all that i getting is scratches.
View 5 Replies
Installed the factory antenna on a car without one from the factory?Is the wire already in place?
View 8 Replies
I'm looking to install an auxiliary port into my 2006 Passat 3.6L 4motion and I was wondering what plug in converter would be best to get, what other cables I would need, and where I can buy a flush 3.5mm aux cord for installing in a blank plastic piece next to the gear lever. I'm not looking to buy a converter that charges an iPod.
View 3 Replies
After installing my Rosen system hours later my battery was completely dead. Nothing unusual about the install. Used factory harness with rosen harness.
View 19 Replies
So I'm about to install an RNS-510 and I can't figure out where the Sirius module location is so I can install the extension that you need.
It's 2007 with 6 discs in dash changer with Sirius.
View 4 Replies
My DDM HIDs came in the mail today and fellow vortexer D.Passat00 was kind enough to meet up with me and do the needed vag-com adjustments. So firstly a shout out to him, he's a solid dude and really nice
Now: Is there a DIY for headlight removal? I can't seem to find one, and without removing the headlights I'm afraid there just isn't enough room to install the new HID bulbs without dinging/touching them.
I have a 2010 2.0t Passat and I got the 35w 6000k DDM HID kit
View 6 Replies
well installed my new in dash dvd player...everything went smooth...turned the car on....AIRBAG LIGHT IS ON...WHAT DID I DO?!?!?!? WHAT DO I DO?!?!?!?
View 21 Replies
Just installed a euro wood/leather wheel in my wife's 03 Passat wagon. It had the MFD wheel previously.I've done the install numerous times as far as going from MFD wheels to GTI or R32 wheels and never had this problem.
Ran a jumper from pin 9 to 18 and modified the plug to the clockspring....I got the cruise working no problem and that's the toughest... I've double checked everything and think it has to be with the wheel itself. I see the wheel has TWO tabs for the horn ground. I'm only using one right now as that's how my R wheel is in my 03 Jetta (just pulled the bad and checked it). What could be causing the horn not to work?
View 3 Replies
After installing the new head unit in my 06 Passat 2.0T, the "Airbag Fault" error appears on the MFD upon startup and the airbag light on the gauge stays on.
View 5 Replies
We have spread it as much as we can and it's come up about 2 inches - then stops,
View 8 Replies
I recently installed replacement speakers in the two rear passenger doors in my 2014 Passat. During the installation the power window switches broke. How difficult is the replacement. I have been looking for a video or tutorial on how to potentially fix this myself. The dealership wants 165.00 a door to fix.
View 1 Replies
Check brakes light came on at 46000 miles the other day. Not really sure what replacement brake rotors and pads to put on? Should I go with OEM or aftermarket? put on rotors and pads from Hawk? and how do you like them? Are aftermarket better than OEM parts?(longer lasting, less dust, ect..)
View 12 Replies