Passat (B6) :: Hard Time Shifting Fast From 1st To 2nd When Accelerating
Sep 1, 2007
Was having a hard time shifting fast from 1st to 2nd when accelerating hard, it was like something was blocking the 2nd gear gate, same thing sometimes when downshifing fast from 6th to 5th.
After JT recommending it here, I installed the Neuspeed torque arm insert. Used a scissor jack on the left front side (it has a wide base), got under the car from the front bumper passenger side. 21mm bolt was tight, but got it out with a regular length 1/2 inch socket bar. Insert was hard to get in (even after spraying silicone on it), finally just sprayed silicone into the existing bushing and the insert slipped right in.
First test drive really made it easy to shift from 1st to 2nd under hard acceleration only a slight bump when entering the 2nd gear gate, downshifing was smooth too. Down side? none that I noticed, no vibration.
View 7 Replies
Advertisement
So I put in a Neuspeed torque arm insert, and that has worked with shifting from 1st to 2nd when accelerating hard. But in my '96 Jetta M5 speed I could throw the shifter around into any gear (except 1st if going fast) at any speed.
With the Passat what I find is that I while I can move quickly to a particular gate, I have to enter the gate slowly. I am thinking this is due to having 6 speeds (narrower gates to fit in same space so I have to be more precise), but then I wonder.
When shifting normally, it is very smooth, it is just when I try to shift fast that I notice this. And it happens even when I am shifing fast "but not" accelerating and the engine is not under load. So this happens when I try to downshift from 6th (at 2,000 rpm) to 5th/4th. Notice this when I am doing 50-60 in 6th and then try to quickly drop into a lower gear to get through a yellow light before it changes.
The solution has been to shift fast to the gate and then slowly push it in, but I still have the old reflexs from the Jetta were it was one fast movement.
View 7 Replies
My 94 Toyota Corolla has about 190,000 miles on it and lately it has had a hard time shifting between 20-30mph. It finally does reach it and does not have trouble shifting at any other speeds. This only happens in the heat of the afternoon (Never have this problem in the morning). Also, my O/D light has been flashing when this happens, or at least around the time it happens. Could these two problems be linked? I took it to my mechanic in the morning and he checked the transmission fluid and it seemed fine, he also had no problems driving around when he tested the car. He said my transmission is going and that I should make "long term" plans. Is there any hope?
View 1 Replies
I have a 2003 Accent and it has been over heating constantly for about 5 months. After it started, we replaced the main radiator hose, thermostat, radiator cap AND a head and head gasket. It worked for about 2 weeks and then over heated again. It seems like there is too much pressure somewhere because the lid for my reservoir shoots off and all the coolant comes out. I'm just not sure where to look for a clog since it is coming out of the reservoir. It also recently started having transmission problems(?) or that is what I think it is... It won't go in reverse and has a hard time shifting sometimes. I'm not sure if it could be related or if it is the tranny also.
View 4 Replies
I bought my 2003 Forester a year ago from a friend with 90,000. I love this car, I put a new timing belt on it and off we went. The car worked fantastically from January to August 2011. One night I was driving to watch a show and rather then shifting into gear, it jolted. Pulled over, checked fluids and so on, car worked normally for a while. It started doing this more frequently. It has a hard time shifting into 2nd and when it does, (at about 40MPH) it jolts and same thing for third and so on. I took it to my mechanic but it never misbehaved for him sop I took it back and drove some more and dropped it off at a transmission shops. They get it to do what it does, ran many tests, decided it was the throttle sensor, replaced it, car worked great for two weeks and then reverted back to this behavior. Took it in again three times but they can't seem to figure it out. Anyway, I have taken the car to five different mechanics and no one can quite figure it out. So my car, the Diva, as I like to refer to her, continues to jolt to shift gears. If I put it into reverse it will shift normally until I stop again or slow way down. I am stumped and sad because I love my car. It now has 101,000 and I want it to be kind to me.
View 5 Replies
[URL] .... My engine has been making this sound for a while now I am at 125000 miles, what it could be and if i need to be worried about it? also, possibly unrelated, it has a SUPER hard time shifting into reverse, it gets stuck and it feels just super sticky shifting in and out of reverse. Sometimes I can't even get it to go into reverse without letting the car roll a bit. Also, at around 3k rpm the engine sounds a little grinder in any gear. 2008 Honda Fit Sport ...
View 19 Replies
Sometimes it happens at slow speeds too but it's so random that I know it will never do it at the dealer. I can't say "When I take off fast or stop hard it makes a weird sound" it's a lease and they will probably blame me for whatever is wrong. Sometimes the tranny doesn't feel right either. I had a Jeep Grand Cherokee LTD that made a similar sound and it was bushings but this car has only 4,000 miles on it. What should I do?
View 2 Replies
Well shoot, not even 120k on the odo and I've had my first major problem with the truck, and the one thing I hoped wouldn't be an issue, especially since I don't work my truck hard and 95% is driving unloaded highway as a daily driver.
Last time I drove it coming home from grocery store there was a big racket from down under (transmission area). It instantly didnt feel right - there was a slight drag even when the clutch was in, but rolled fine when I pulled it out of gear entirely. Was VERY difficult to go into first gear. Other gears shifted ok but some of them felt hard too. Would not go into reverse at all!. Slight bit of clinking noises every time I started from a stop, but made it home ok and things seemed to ease up as I went. Today, seems to be shifting fine, reverse works and everything.
Now for several years I've had a noise that I couldn't figure out. I am guessing it's related because it sounded like was coming from tranny area. Often, when starting out from a stop, there was a bit of clinking noise like a couple tin pie pans rattling together just as the clutch started to go. I kept thinking it was loose heat shield or something clanking just under the initial vibration of getting going. Never did find anything loose. I'm guessing it's internal.
I've called a couple local shops and so far no one wants to mess with it. Dam this sucks i hoped the MT would be more reliable, not the first thing to go. I myself have never messed with any aspect of a transmission, though I not opposed to learn however I was hoping to take this on an out of state trip end of May, and I'm not going to have much any free time between now and then.
View 9 Replies
I just picked up a 2000 v6 passat with an automatic trans. I am new to passats, esp with autos. The cars transmission is having problems shifting with the trans gets hot (25-30 min run time) and slips. What is the trans code for this car and is it FWD or AWD? It has 220k, and the engine runs great. It was sorta an impulse buy, I plan on flipping it so hopefully tis a good investment. Any common things I should be aware of so I can get it tip top shape to sell it?
View 3 Replies
Noticed the past weeks its hard shifting out of 1st and entering 2nd, not noticeable in 3-6. It clears up as the car warms and after cycling through the gears a few times at operating temp the problem goes away. Ive heard of the notchy shifting due to cable adjustment but thought it was strange its not continuous in my case. Cold weather maybe? Today it almost felt as it would not pull out of first and took way too much effort shifting to 2nd.
6sp manual.
View 6 Replies
I installed new plugs and ignition coils in my 2008 Passat 3.6L V6 and now I have a slight bog when accelerating hard. Engine runs good otherwise and no codes. I gapped new plugs @ 1.0mm per manual. The old plugs had smaller gap. Would larger plug gap cause the bog?
View 3 Replies
My 2006 FSi Passat is having problem starting every time I put gas in it. It starts fine at other times only hard after adding gas. What could be wrong?
View 4 Replies
Hard shifting from the car. sort of a slam between gears and while in gear.
Possibly a mount?
View 7 Replies
I have a 2000 passat 2.8 car been hard down shifting when slowing down under 20 mph on the road . shaking a bit and specially on high ac fan. Engine mounts are fine..
I looked if engine mounts if leaking but they were ok. I bought a snub rubber from the dealer and changed it. No deference!!
View 6 Replies
I've got 95k miles on my 2001.5 and have been noticing that the transmission seems to shift pretty hard. Today it seemed like it was hardest in the 3rd to 2nd downshift. I got it checked out a couple of months ago and the dealer said it was the throttle body (which I haven't cleaned yet).
View 5 Replies
When ever I "Brake boost" it kills the power when I hit the brake and gas hard at the same time.
View 3 Replies
I've been suffering for this issue for quite a while. My passat 06 is experience a hard time to start up after sitting over night. The first attempt in the morning is always shaky. Then, it starts up okay during the day. Even like after driving 5 mins and I can restart it without any problem. But it's the first time of the day that troubles me.
And some history, my battery died completely like 2 months ago, and I replaced it with a Duracell. At first, it has no problem start up at all. But there was one day I forgot to turn of the lights and leaved my car over night.
The next morning, I was able to start it but with some difficulty. Since then, I have been experiencing hard times in starting up. Need to point out the issue? I'm really afraid to have a dead battery in a parking lot 1 hour away from my apartment again ..
View 11 Replies
Had this warning on information screen? I had this show up, my car wouldn't start and i had a hard time getting the key out. After bringing it to the dealer they claimed they fixed it and now it happened again today... so its back at the dealership
View 2 Replies
Code P0322 Mod10 Ignition/Dist Engine Speed Input Circuit no signal. Car had a hard time starting, then stalling, now it has been fine since the weekend.
View 2 Replies
I have a 1998 Passat 4cyl turbo. Recently the ICM module on the air box went out when I had No Fire on 2nd cyl from the front. Replaced it with a MPGauto part for $63. It fixed the problem but, I noticed that now the PRND321 lights are luminated all the time and downshifts hard into 1st gear. Also should I be concerned that I need another catalytic converter b/c I drove another 40 miles with it missing and it (CC) was very hot. Do they break down inside? The car runs great. Is my problem related to this china part not having a special VW code or can the car be reset?
View 1 Replies
I just got a 2000 passat wagon with a 1.8t and tiptronic transmission. The questions is when it is cold the transmission has a hard time to start driving. But as soon as it is warm it drives great. It is throwing a check engine code havent checked it yet.
View 9 Replies
