I have a 2008 passat komfort with 53K miles on it (TSI engine). I had the water pump replaced two weeks ago at the local dealer. After this procedure I am getting all gear shift lights on at the same time on the dashboard, after I drive the car roughly 8 miles. I would like to avoid going back to the dealer since I don't trust them.
View 6 RepliesFeb. 2, 2010, I had my '04 Phaeton in for service (88,997 mi) because it would not start. After diagnosis, found faulty brake switch and shifter mechanism. Removed and replaced brake switch, shifter assy, and PRNDL sensor. On Feb. 17, '10, after I started car, it sounded like it was in wrong gear and all drives were lit on dash. Turned off, started again and everything was OK. Called service tech to let him know; he said he would notify mechanic.
On Fri., 19 Mar. '10 at around 2:15 p.m., was driving and noticed again that all drive lights were lit on dash. Pulled off road, turned off motor, started again, and everything seemed OK. Went farther down road, entered super highway, pressed accel. to pass tractor-trailer, only to notice all gears were again lit, as well as a new engine outline (in orange). As I was passing the truck, car surged forward and then made a loud clunk, I drove at 60 on the 70 mph rd. to get to rest area. Turned off motor, looked in manual and it stated car should be taken to dealer. Since it was still "drivable" and I didn't need a tow, I tried calling the dealer 4 times, but only got through to an answering machine. I decided to take car to dealer.
When I arrived, I spoke to the only service writer at the desk, and he was new. Told me they were too busy to take my car that day. I asked to speak to VW service manager, and he said I should not drive car. Car now has 91,509 mi.
I was wondering, why all gear lights keep coming on at the same time, and why the car feels like it has to shift to the next gear. I am thinking the repairs on Feb.2 were not complete.
I have a 1998 Passat 4cyl turbo. Recently the ICM module on the air box went out when I had No Fire on 2nd cyl from the front. Replaced it with a MPGauto part for $63. It fixed the problem but, I noticed that now the PRND321 lights are luminated all the time and downshifts hard into 1st gear. Also should I be concerned that I need another catalytic converter b/c I drove another 40 miles with it missing and it (CC) was very hot. Do they break down inside? The car runs great. Is my problem related to this china part not having a special VW code or can the car be reset?
View 1 RepliesI have a Passat 2.0 TSI 2008. Today after having lunch I tried to start the car to return to my office, but it didn't start. The lights dimmed like the power was draining. I tried again and no sign of a start and no lights this time. Called my insurance 24h assistance. They brought a spare battery and we connected it so as I could start the car. The started this time. Disconnected the spare battery, and left the motor running for 10 minutes. Instead of turning off the car, I decided to drive it a while to feel if everything was fine.
Well, the A/C turns on, but automatically turns off in a few seconds. The cruise control shows an exclamation sign and the horn is faint. When I stopped the car I noticed that the lights on the dash were kind of faint. Now, I am not sure I will manage to turn it on again. The battery seems to be on good shape. It has about 1,5 yr now and I could see that the indicator is green.
This morning the Shift Knob made a click every time I selected a gear, for about an hour, then it went away.
It was colder than almost ever here (Berkeley, CA) last nite, 30F. But there was no click back in '05 at 10F (in Prudhoe Bay, AK).
Mechanics (even the dealership!) say not to worry--probably a plastic part--just advised me to shift gently.
Today, without explanation the shift indicator on the dash on my 98 Passat Wagon highlights all gears. When you shift to any gear. . . . the display does not change. Further, shifting is rough from 'park.'
I noticed this problem after looking at all the fuses to see why the radio was not powering up. I have checked fuses. . . . and unplugged the battery and plugged it back in.
So my wife says she hit a curb last nite on her way to work, now this morning the car lost power several dash lights are on and the lcd display says problem on start up, and has a orange icon at the top left. It will only shift between park and neutral. The light on the power button wont turn green either. Currently I'm waiting on a tow truck.
View 6 RepliesI painted the senser on the dash black on the inside so the headlights stay on all the time. My question is the dash lights don't stay on all the time, I assumed they would with the headlights on and senser cover painted, drives me nuts with the dash lights coming on and off. How to make dash lights stay on.
View 14 Replies2009 Touring Dead at 55000... All lights on dash light up and won't shift to reverse or drive only neutral. Towed to dealer and they said it threw several codes and are replacing the tranny.
View 18 Replies2011 Sonata- Both the gear indicator light on the dashboard and the gear indicator lights at the gear shift suddently stopped working. No way to tell what gear without any lights. Is this a fuse type problem perhaps?
View 10 RepliesI have a 1981 F100, lately when I've been driving at night I notice my headlights, dash lights, and charging light will flicker at the same time, and even sometimes my headlights will flash on and off by themselves.
View 2 RepliesMy airbag light won't go away, and everytime i pass 25mph my dash says airbag fault. Is this another sensor that went out?
View 4 RepliesWe have a 04 Town and County with about 97,000 miles on it. If we are sitting still for a period of time, it will drop into limp mode. You actually hear a clunk, then the shift indicator lights up ever gear PRND, they all appear with a box around them as indicated. It happens more often if the AC is running. Actually at stop lights we turn the AC off. It happened in line at a drive in movie once. After it sits for a bit it is fine. No issues going down the road. But it seems to happen if there is not movement.
View 1 RepliesIn my 2004 Camry the lights for the gear shift selector and fan speed and temperature dial are out. Is this a common light source or fuse that controls these lights?
View 1 RepliesI'm new to this and not really sure if I'm doing it right. I need to know how to take the gear shift knob off my 2008 santa fe.
View 3 RepliesI got new brakes put on a few months ago month (semi-metalic)... Any way anytime I drive and it is raining, when my car comes to a to a complete stop, and I hit the gas to shift into second gear my car sort of stutters like it doesn't want to shift but then it does.
I took it to two mechanics MULTIPLE times who even drove it in the rain and they couldn't find a single thing wrong. they hooked the transmission up to the computer and noticed nothing.
It has happened multiple times and its both been raining. Could it be the tires aren't gripping the road and that's why my cars shifting funny, like the tires aren't caught up?
had issue/backed into garage door with rear of car---car will now not go into gear--gear shift will not engage. can manually engage with button, but, will not do normally. abs break system light now on. what do I do?
View 2 RepliesI purchased a 2004 Chrysler Town & Country Dec 2003. I noticed an intermittent problem with my gear shift indicator lights PDRNL were all lighting up when I would start the vehicle in February 2004. I would have to play with the shift lever a few times to get it into gear.
On Feb 26, 2004 the vehicle would not start at all, would not even turn over. The vehicle had to be towed to the dealership. It had 3500 miles at the time. The error code was PO706 check shifter signal. They said it was the transmission range sensor and replaced it. I had no problems for 2000 miles until I was in northern Michigan and the gear shift indicator lights started doing the same thing.
I brought it to a local Chrysler dealership the next morning and they scanned the following codes PO1791 loss of prime PO705 check shifter signal BCM stored TCM message not received FCM stored TCM communication fault DSD stored incomplete power voltage. This dealership checked connections and wiring harness which were okay so advised me to take it back to my dealership at home since they would have to tear the whole van down to figure out what was wrong and any parts they would need would not get there before I left for home.
Luckily, I made it home with only one incident with these lights coming on. My dealership had the same error code PO706 and also PO444. Here is what their repair order states "DTC PO706 shift signal fault. Front pump allowing torque convertor to bleed down IPM internally shorted causing intermittent shift signal errors and PO444 and PO706. Scan and perform trans diag and fluid level full R & I the transmission R & I the pan and valve body replace the filter R & I the front pump and replace the front pump and torque convertor called STAR about intermittent loss of shift signal was told to replace the IPM. Replace the IPM (power distribution center) retest ok at this time."
So here is my question....I am very worried with all that I am reading about transmission problems and this van has only 6500 miles and all these parts that they have had to replace already is really scaring me!
We just got a 2008 4Cyl with the 5spd auto. Only had it two weeks. When driving 35-45mph, the tranny will shift up into 5th gear and then basically STAY there. As we approach a slight upward grade, the tachometer is stuck at 1200 RPM and the whole car shudders and vibrates as the engine "lugs" down. We find ourselves constantly playing with the gas pedal in order to FORCE the tranny to downshift.
Took it to dealer. They experienced same thing. They said it was "Normal for this model - at this time". They quietly told me they are getting other complaints and look forward to Toyota releasing new programming for the ECU. Three different drivers and rear passengers have quickly remarked about this "sensation" when going up any grade.
We experience this constantly driving here in Maine. Interstate and inner city driving is fine. If we move the gated shifter to "4" - it resolves this problem. Dealer said this is normal. So I actually purchased a "manual" automatic transmission?? Do we just stop whining and retrain ourselves or do you folks think we can look forward to a solution?Our 2004 Camry, 2002 Tundra and our 1999 Solara had wonderful transmissions.
I am now getting a grinding noise when I shift from first to second gear. It sounds like the two metals rubbing each other. Its not happening all the time, but for the past two days a bit frequently
I had reported this grinding noise when I turn left a month back. Was thinking because of my worn out tyres, but apparently not.
I have a 07 f150 getting 17 mpg in town, I would like to get 20 MPG in town, this is a 5 speed, i do not shift into 5th gear. Max in town in 40 MPH. I have 3.55... I was wondering would 3.27 getting me to that 20 MPG?
View 14 Replies