Passat (B6) :: 2006 - Car Started Jerking / Misfiring
Apr 9, 2007
I've been out of town a bunch and my car has been sitting out at the airport. I picked it up last friday, drove it home. Today on my way to work the car started jerking - like the engine was trying to rev slightly. When I put it in park, and listened, the engine was jerking or misfiring maybe. The exhaust was a bit louder than normal as well and i could hear the stress in it. I also smelt a strange burning smell. I've called and had roadside assistance pick it up and take it to the dealer.
View 7 Replies
Advertisement
I have a 2011 Hyundai Accent 1.6L. A few weeks after I bought it w 38,000 miles, it started misfiring so I replaced the spark plugs. It ran great for about another 6 months and started misfiring again. I took it to Hyundai to have it fixed and of course it wouldn't do it for them. I told them what it was doing and they said that there was no code so it was probably my spark plugs. I replaced my plugs with the OE plugs and got the same trouble about 4 months later. Now it has 60,000 miles and my warranty is done. I put in new plugs yesterday and it only ran well until it warmed up and it did the same thing. I ordered new, better than OE Delphi coils yesterday and I'll get them today. I feel like there's a bigger problem with the system that's causing the problem with the coils.
View 7 Replies
About a week ago, my wife's Malibu (~130,000 mi) started exhibiting symptoms I would associate with a problem with the ignition system. It was idling rough, it felt like it was misfiring, and the check engine light started blinking when I was accelerating from stop up to 30-40 mph.
The timing was all weird because of the holiday, and so I didn't take it to get the engine codes pulled right away because I figured Id take care of it this week (we were traveling over the weekend).
My wife just called and said her car won't start at all. The car will try to turn over and she didn't describe anything consistent with a dead battery.
If I can't get it somewhere to get the codes pulled, what might be wrong? To summarize, it started idling roughly and maybe misfiring about a week ago, it sat for four or five days, and now it won't start.
View 3 Replies
Our Accent has just about 86k on it now, back in November it suddenly started running real jerky/rough, misfiring kinda thing. So I was able to drive it to my local repair shop and they found a bad coil pack on #3, so they replaced that and put in new plugs while they were doing it.
Just Saturday we were shopping about 20 miles from home and cranked it up to go home and started doing it again, pretty much identical symptoms, runs out normal at certain RPMs so I knew it was probably same thing...I was able to get it home and then took it in this morning and sure enough now #1 is shot. So they are replacing that. They want about 30$ more per coil then I can order them for myself online so I didn't want to scarf up the money for the other 2 that are still original.
View 29 Replies
My 06 2.0t has 73k on it. but i noticed at around 60k that when I brake, almost to the point where I'm stopping (like at a light) the car jerks or grabs...kinda like the tranny is catching or the brakes are grabbing. Twice I've asked vw to check and twice they've said they can't find anything wrong.
Warranty runs out at 75k, so I think I'm going to take it to AAMCO to have them check the tranny and see what they say.
View 5 Replies
The car is a 2002 VW Jetta, automatic 1.8t GLS. 146k miles on it. Has an external amp/sub wired up by my brother who is an MECP certified tech and has been doing car audio and overall Audi/VW for years.
I was driving, nothing out of the usual, this car is my daily. Stopped because of traffic and my car died in the middle of traffic, the gauges (tach, speedo, gas, etc) spiked immediately, which I assumed meant loss of electricity, but my radio, headlights and everything else stayed on. The oil and Battery lights came on as well. Tried to start it, it was trying to start, and was cranking quickly, but wouldn't turn over. I got it out of traffic. I pulled my amp power and the car turned over and started driving like normal, so i figured there had been a short in the wire and that was what caused my issue. Drove about a half mile down the road, car shut off again, car said it needed oil this time. checked the oil, there was plenty, but i put more in to be safe, and it turned right over and i managed to drive it about 30 minutes and got it back to my house.
So, my brother and i look the car over, couldn't find anything really wrong with it, so we took it out for a drive, no problem at all for the first few minutes of driving. Car shuts off again, doing the same thing, but just the battery light came on. My brother jumped my car, it turned over, but as i started to drive it, it was a lot more rough with shifting (possibly tied to electrical problems because i know there is a solenoid cluster for automatic transmissions), i mean you could actually hear the gears shifting and the car was kicking through each gear, as well as my driver side headlight not turning on (just installed brand new xantec 6k 55w HIDs, but i dont think those are the problem because the problem started before i installed the HIDs) and died 3 more times before i got it home, having to jump the car every single time with symptoms the same as the first time it died without the oil light. Another thing i noticed is that the car seemed to only die when i hit the brakes and the car went to low RPMs, which lead me to believe a major vacuum leak. At idle the car also seemed like it was misfiring even though the CEL was not flashing, it just had the jerking feeling and sound of misfiring.
My brother and i take a better look into the bay area, and noticed that the top of my engine was covered in oil, from the intake manifold back. I know my car has been leaking oil, but not spraying it. We pulled everything apart, totally cleaned the engine bay area out including MAF, spark plugs, coil packs etc. The engine bay area looked practically brand new. Now i do know that my car has had a vacuum leak (no boost gauge to tell how bad, but the brakes were a little bit less responsive and the car was acting as though it was misfiring despite the fact that the coil packs and spark plugs are brand new) and we couldn't find where it was, and we thought that maybe that was the problem. A lot of the vacuum line was dry rotted and falling apart and some parts weren't even connected anymore from that, which we replaced all of the line we could find to eliminate the idea of a vacuum leak causing the car to die when i hit the brakes. We also tested the battery with a multi-meter which read variably between 13.8-14 V, which if i understand correctly is within normal range, but oddly enough we put the battery through a stress test including turning on defrosted, turning sound system back on, headlights on etc, and the voltage didn't read much different, still bouncing between 13.8-14.
When tearing things apart, we also found that the starter solenoid was unbelievably loose due to a bad transmission mount, and one bolt was missing, so we were thinking that could be arcing causing the problems, but when the solenoid was tightened down, the problems still persisted.
Started the car, let it warm up, and it seemed perfectly fine. I drove it into town without problems, but forgot my wallet at home, so i had to turn around and go back. Almost made it home, the car died while stopping at a stop sign. Tried turning it back over, nothing the first 3 times, let it sit for about 5 minutes and the car turned right over as if nothing was wrong. Died again when i made it into my driveway about 0.5 miles away and the symptoms repeated until the car finally just turns on like normal now, but the idle is at 1100 RPMS (not sure if related or not) even though the car is at the optimal temperature. I tried driving it again after the car starts normally like it does now, but it just repeats the symptoms that it has been, cutting off but leaving the stereo, headlights etc on. I managed to get it back in my driveway.
View 5 Replies
My dad has 2006 passat 2.0T. In December 2010 he went overseas. During his absence the car was parked in garage and not in use.
So one day I decided to start the car and as soon as I turned it on the car made this noise and check engine light came on. Took the car to a private repair shop and found out the cylinder #3 was misfiring. The tune up for this car was due so I had all four spark plugs changed and the car ran fine for few days. Then couple of days later it started making the same sound and this time around the coil for cylinder #3 was replaced.
A few days after that check engine light came back and this time it was blinking and the engine was struggling to run, took it again to the workshop yesterday and this time another coil not sure which cylinder was replaced. (all this is done at a private workshop). I have a hunch that the car is going to run fine for a day or so and the problem is going to come back
I never had any major issues with it up until now. Bought this car new in 2006 from dealer. I am afraid that this might be a start of a downhill roll from here on I will drive the car tomorrow and see how it reacts.
View 7 Replies
I accidentally left my sons 2002 Honda Accord EX engine running overnight for about 15 hours. He drove the car and said most of the gas was gone and that the car was jerking while he was driving. Will the car be fine?
View 9 Replies
I have an Hyundai Accent Petrol 1.6L ABS.
While driving the other day suddenly the car started sputtering or jerking while on low rpm and after changing gears
the exhaust is also making sputtering sounds when on idle.
when I press the accelerator the sputters/jerks and then picks up rpm. the performance of the car does not seem to be affected but petrol mileage has fallen.
when I accelerate slowly then the sputtering/jerking is reduced and sometimes not present much. There is also a deep and heavy sound of the engine running heard inside the car (which has been present before the timing belt change)
I took the car to the workshop and attached the OBD.
the codes P0340 P0112 were present. we now erased the codes and the mechanic checked the sensor wire plugs for the cam sensor and air sensor saying it looks fine. on attaching the OBD again the codes were not present. However the sputtering/jerking continues. (the fuel pump and filter were also checked to be ok)
My Timing belt has been changed approximately a month back. My car does not run much (Approx 40kms a day)
My questions are
1. can a bad timing of the timing belt have anything to do with this and thus giving these codes?
2. Can there be something wrong with the exhaust due to which this problem is taking place?
3. what could be possibly wrong with the car?
4. Can this result in any damage to the engine?
View 13 Replies
My 06 mazda has recently started blowing smoke from the exhaust and jerking it self when accelerating.i have changed the spark plugs and i found one soaked with motor oil. The car only has 75000 miles on it....
View 1 Replies
My transmission started jerking into 2nd and out of 2nd when it shifts. It only has 20k miles on it and has not been driven hard at all. I heard of some people doing resets on the transmission,.
View 3 Replies
I have a '98 ZX2. Recently, my car started misfiring. I'm not sure of the cylinder number, but it's the one closest to the driver's side. Long story short, I found that the fuel injector is not firing, if that is the correct term. I used some trick I learned on youtube which involves using a screwdriver to listen for the fuel injector clicking. Anyway, I made a noid light out of an LED and a couple of resistors and found out that there is no injector pulse. I know the noid light works because I tested it on the other cylinders and it flashes. Anyway, I'm not sure where to go from here. I've read elsewhere it could be the PCM but if that were the case it would probably affect every cylinder and if it was a crankshaft position sensor the car wouldn't start.
View 5 Replies
I used fuel injector cleaner in two different gas tanks; the car started shaking and the check engine light came on. The mechanic changed a sensor but the car was doing the same; I was told that it will take 4 full gas tanks to clean the gas lines. I went to autozone and they told me that the car had a misfire on cylinder 5 and multiple misfire as well. I do not trust the mechanic any more since I had to take the car back to them several times and still is not fixed. They also did a full tune up and the check engine light still on and flashes when I am going about 55 mph.
View 3 Replies
How to repair a 2009 mini cooper that started misfiring? What is the most common cause for misfiring?
View 19 Replies
I have a 92 Celica ST 1.6L 5 speed with 175,000 miles on it. When should I consider getting the timing belt changed?
Also, several months ago the engine started acting up while I was on a long road trip, suddenly anytime I tried to accelerate the engine started sputtering / acting like is misfiring.. It got progressively worse during the trip, so I pulled over and to my surprise there was a significant amount of oil in one of the spark plug 'wells'. After soaking the oil up with a rag and cleaning the spark plug cable/connector the problem has only occurred one time since, and not nearly as much oil was present. It sound like I just need new spark plug cables.
View 6 Replies
I was driving my '98 Jeep Grand Cherokee Laredo (6cyl 4.0l 4 wheel drive) on the freeway when it, very suddenly, started shuddering badly. The check engine light came on and then started blinking. I pulled right over and shut it off. I stared it back up and the engine is misfiring badly. I had a code reader with me and it's showing three codes. A random misfire, a cyl #5 misfire, and a Cyl#6 misfire. It will sit and idle (very roughly obviously).
There was no drop in RPMs, oil pressure, voltage or anything when it happened.
I got it home and replaced the distributor cap/rotor, all six spark plugs, and the plug wires but there is no improvement. I cleared the Codes and re-read them and got the same errors again.
View 4 Replies
2014 Accent 14,000 miles
Filled the tank and shortly thereafter there CEL started flashing and the car sounded like it was missing. It was towed to the dealer, and they said they cleared the light and could not get it to happen again.
When I next drove the car it ran fine for 20 minutes, then it started misfiring and the CEL started to flash. Had it towed to a different dealer, and they said the same thing. Cleared the light, but couldn't get it to happen again.
On the way home form the dealer, after about 20 minutes of driving - the same thing. Today, I started the car in the AM no light and running fine, drove around and town and in exactly 20 minutes it was misfiring again.
First dealer said it was a P0302 code.
View 4 Replies
2007 GMC Sierra 1500 (MAX) ... This had happened before 3x, but was about to turn truck off and wait 10 second and turn back on. Then truck would run fine for months. I found this on my truck manual.
My truck is riding differently. Here's the story - I put new tires on Friday, an hour later, my truck started to ride rough. The light on dashboard is; Check engine, Engine power lost (truck would not get up when this was shown on dash. This error has not come up again), stibilitrac check. Truck's driving performance; Idle sputters (like RPM rising, but they are not, it’s just the engine shaking), once driving when it shifts hard at 3000 RPMs (only 2nd gear). I took my truck to Advance, and this was the error code I received; #6 Cylinder Misfiring and Actuator module.
I changed all spark plugs and number #6 was very dirty compared to the other and smelt very much so like gas. I have not driven this truck only cracked and it stayed in park. I had a person look at it, and he said that the #6 cylinder was the only problem he could find when he hooked up his code thingy. Now he played with everything and took out the #6 spark plug (this is now Tues) and said that it didn't smell of gas like it should have. At the end. he stated that we first should change the Injector for #6. and if that did not correct the problem, then he would recommend the lifters to be replaced. I asked how confident he was about "his" diagnosis. and he stated.... I am not a GM mechanic... wow. now I am confused as to what I should really do! BTW, he never cleared the error codes...
View 16 Replies
My wife was driving the car on the freeway and flames started coming out of the hood/vents/etc. We just picked the car up from service on Friday...Today is Monday. Whats the standard protocol for a car that's is still under warranty that goes up in flames?
View 24 Replies
My second car is a b5 passat, and i disconnected the battery to do some wiring, but now... it sounds like the car won't come out of first gear (it's an automatic) and won't go over 16 mph without jerking like crazy.. I thought of maybe limp mode because my GTI has done that but i don't know.
View 3 Replies
My car is jerking from 2-3...whether in auto or in tip.
View 3 Replies
