Passat (B5) :: Timing Chain Won't Working - Blown Engine?
Jun 30, 2008
I posted my passat to sell/part out last week. So I talked to the mechanic today and he hasn't looked in the engine. He just says that when the timing chain goes it wrecks the valves and pistons (needs rebuild). HE WAS TRYING TO SAVE ME MONEY THOUGH...FAMILY FRIEND. My sister got lucky on her passat and only messed up the valves. But she was sitting still....I was doing 80mph on 95 going to work. Should I have the engine looked at or sell it.....what are the odds I got lucky??? I found a lot of posts/blogs about how everyones engine blew, but no one said they got lucky.
View 9 Replies
Advertisement
I have a 2006 Honda CRV with 145,000 miles on it. It has been giving me warning lights for about 10 weeks. My mechanic discovered that it is burning oil, which he says all old cars do. But the lights continued. He put the computer on it and says that I need a new timing chain and it will cots $1,100.00. He also says he's not 100% sure that this will stop the lights. I don't want to sink that kind of money into the car if it won't correct the problem. The lights that come on are the check engine light, the VSA light and the triangle light. They do not come on all of the time. Maybe 3 time a week but they go off if I stop the car and re start it.
View 19 Replies
This is a 2000 Passat GLS 1.8 turbo that is in great shape and loaded. It recently had all new tires, brakes, belts, and tune up 98,000 miles. Now the not so good, after died while driving it was taken to the garage and the mechanic told us it needed a new camshaft and timing chain. I didn't have the money to start dumping into the car so I am stuck in limbo.
View 9 Replies
I was thinking about checking out the above vehicle at my local dealer (Chevrolet). They're asking 15.9k and it has 57k miles. I need to know if it has a timing belt or a timing chain and how reliable is the engine/transmission.
View 1 Replies
I have a quick question, when a timing chain breaks on a gli does it cause damage to the engine(like mess up the piston and valves) need to know ASAP.
View 1 Replies
is it possible for a loose timing chain to cause a engine miss.
View 1 Replies
I have a 2005 Ford Explorer with a 4.0 SOHC while the engine is running the left side timing chain rattles. I replaced the timing chain and guides and tensioner, the engine has good oil pressure but the noise is still there.
View 2 Replies
I've noticed a noise coming from the engine which sounds to me like the timing chain. Seems like the tensioner is keeping the chain a little loose while the RPM's are low. The rattle doesn't happen all the time; only when I let off the throttle or accelerate keeping the RPM's low.
This is just my guess that it's the timing chain. I had heard a similar rattle in my old I35 and I had to change the timing chain tensioner.
I'm going to check the engine oil level tomorrow morning. This 10,000 mile oil change is really starting to seem like a not so good idea! Right now I'm at 9950..
View 1 Replies
My 2003 Sante Fe has developed a rattling sound in the engine. The oil level has been good. I took it to a dealer for diagnoses and they told me that the engine was gunked up and the timing "chain" tensioner couldn't move to keep it tight and it was rattling. They put some engine cleaner in and changed the oil and wanted me back in 500 to clean it again. I did that again, but the rattle is still there. It gets a little quieter after I have driven it for a while.
My question is doesn't the Sante Fe have a timing belt? If that is the case what do you think the rattle is?
View 6 Replies
If the sensor starts to work loose the engine will keep advancing until valve loving embraces little piston then the party is over.
View 12 Replies
I brought my 2004 VW Touareg V6(83k miles) to the dealer for a recall on the ignition call and much to my surprise, was presented with a diagnosis of a $6,000 problem! The dealer told me that the computer read some codes which say that the timing chain is stretched and needs to be replaced. They said it will take 4-5 days and should be done asap so it doesn't "go out", because if it does, it's an even more expensive problem. I took the car to another VW repair shop and they asked me if I heard any noised when I start it cold (like pebbles in a bucket). I have not had any problems like that at all, so they said I shouldn't worry until I start getting symptoms. They also said there is no recommended point (like 90,000 miles) when VW recommends the change, so it really shouldn't be a common problem. I want to do the right thing, but I don't want to rush into an expensive repair if it isn't necessary.
View 1 Replies
I've got my sister's 1995 Dodge Neon with the 2.0L SOHC. While driving it recently I heard a horrible squeaking noise then a ZZZZZZzzzzzz sound. I immediately pulled over. The check engine light came on, and I shut the car off. Coolant was all over the place leading me to believe the water pump failed. I had it towed to my house, and now I will have it towed to the shop to get fixed. I would like to have them repair the timing belt and water pump. However, I am afraid that the valves were beaten to a pulp and now I will need a new engine. I was only going 35 mph when it happened. What are the odds that my valves were smashed up, and is there anything I can do to check them before I pay for a timing belt/water pump repair?
View 19 Replies
On Feb 2015 I had this oil leak developing around the timing chain cover/ oil pressure plug and so i replaced the oil pressure sensor and clean the area and though problem solved...
Fast forward today and the weeping has redeveloped and has gotten larger than last time , its only a weeping issue no visible oil droplet leaks, anyways I took a mirror and when probing around and found the leak origin from the rusty looking timing chain tensioner...that what i think it is.
My question is should I just remove and replace the Rubber O-ring on it or should I just replace the entire timing tensioner unit with a new one, my original timing chain tensioner is sitting at 85k miles. The O-ring is free (i have a kit) and i can do it right now or a New Timing chain tensioner w/ new O-ring is around $20 bucks but i cannot verify the part number ...
View 3 Replies
I have an '09 Tiguan that recently began to start hard. Two days ago, it refused to start and hasn't started since. It cranks and cranks but to no avail. I disconnected the fuel line at the first hard piece on the front side of the head. The primer pump when activated pours gas out of the line for about 5-8 seconds.
I also pulled the coil packs off and verified there is spark on them. I scanned the car with vcds and came up with nothing other than a couple voltage codes (battery is low at this point from cranking and is bulged and showing yellow in the spot window).
Tonight I borrowed the perfectly fine battery from my B6 and attempted to start it. No codes whatsoever and yet it still refused to run.
View 5 Replies
I read for a few second at start up ok . Have it checked : [URL] ...
I will be opening up the case in next few days. Chain still on holding by a few teeth. Metal wedge between teeth and chain.
View 22 Replies
My neighbor have a neglected 1995 Dodge Ram with the 3.9L V6. This engine is called a "Magnum" but I have to say it is pretty gutless overall. Anyway, it has the famous clatter caused by the timing chain tapping against the timing cover. Every one of these from this time period sounds like this and I understand it is a common problem. Is this a critical problem or not? I understand it can be fixed by replacing it with a newer style timing set with a tensioner. If this won't cause damage, I say leave it alone as the noise is just a minor annoyance. I was just in as far as the water pump and was tempted to tackle it but figured it could wait.
View 10 Replies
my car timing chain jumps up and down wen i try to start it.befor that i hard alot of clinking sound coming from the motor now the car wont start
View 7 Replies
Just purchased a 2002 Camry for my son to drive to school. The car has 275,000 highway miles on it The car was well maintained by the previous owner. I have heard that the timing chain should last about 300,000 miles. However, the owner's manual does not mention any replacement interval. Since the cars mileage is approaching 300k, I'm wondering if the chain needs to be replaced. The engine runs great. However, I do hear a bit of a rattle from the timing chain pully area. I replaced the valve cover gasket and inspected the chain but didn't notice anything unusual. I have mainly driven import cars with timing belts and not sure if this rattling noise is normal for a Toyota with a chain or an early sign of needing replacement.
View 5 Replies
Experiencing a really bad rattle after changing the oil? It sounds like the chain tensioners are losing pressure during the oil change.
View 11 Replies
I just replaced the timing chain and water pump on my 1999 K1500 5.7L. After spending several evenings and a few early mornings working on it, I get everything back together and go to start it up. It starts then immediately dies. After double checking that the CKP sensor, two plugs on breather, and a/c and alternator wires (these are all that I unplugged) are connected I try in one more time before coming in to work today.
Timing chain was installed with No. 1 at TDC and mark on cam at 12 o'clock position as stated in the Haynes manual for the truck. I did not remove or even touch the distributor since replacing the intake gaskets ~3 years ago. Will check to see if any codes are showing in the morning when I have my laptop at home.
View 4 Replies
Changing timing chain tensioner? Mine is making the rattling noise on startup. Tried searching one internet for any DIY's out there. Haven't really found any good ones.
View 7 Replies
