Passat (B5) :: Timing Belt Replacement?
Sep 25, 2006
I am looking for a link or instructions on replacing the timing belt on a 2.8 30V. I attempted to search and mostly came up w/ the info relating to the turbo.
View 2 Replies
Sep 25, 2006
Advertisement
Passat (B5) :: Timing Belt Replacement After 105,000 Mile?
My 2004 Passat 1.8T GLS (station wagon) has 72,000 miles. I checked the manual which says that timing belt is to be replaced at 105,000 miles.
However, car is 8 years old - does the age matter or I should be fine until I get to 105,000 miles to replace the timing belt, tensioner, water pump etc.
Passat (B5) :: Timing Belt Replacement For 2.8 V6 Engine
I got 123000 km on my car. Manual says 144000 km is the right mileage to replace the belt, but I have heard opinions that it should be done earlier.
View 7 RepliesPassat (B5) :: Timing Belt Replacement Every 60,000 Miles?
I was told that I must replace the timing belt every sixty thousand miles. Is this true?
View 24 RepliesPassat (B6) :: 2006 2.0t - Timing Belt And Water Pump Replacement?
How to change the timing belt and water pump on a 2006 2.0t passat?
View 3 RepliesGolf VI R :: Timing Belt Replacement Interval?
Does VW have an official recommendation for replacing the timing belt?
None of the publications I've seen list the timing belt interval. My car is very close to 95k miles.
Celica :: 1995 GT - Timing Belt And Oil Seal Replacement
Looking for the proper instructions in replacing timing belt and oil seal I have done this on a Honda accord before but I need to know how to properly align everything so I can do it right the first time.
View 2 RepliesAccent LC (2000-05) :: Car Won't Start After Timing Belt Replacement
I just finished replacing my timing belt, water pump and all belts. I made sure to double check the timing marks lined up via this pic:
Timing belt diagram
I put everything back together and no go. I am not sure what to do now. Should the crank sprocket pulley be in a special starting position? I see is has a "1" engraved on it.
Accent MC (2006-11) :: 2008 - Won't Start Up After Replacement Of Timing Belt
The timing belt broke in my gf's '08 accent recently and I decided to have a crack at replacing the belt after getting a quote for $900 from the nearest mechanic (with no guarantee it would fix the problem).
When re-aligning the cam and crank to TDC, I wasn't sure if it mattered which revolution the crank was on (ie. 1st or 2nd revolution) when putting everything back together. I tested rotating the engine with the new belt on slowly to make sure there was no contact and everything seemed ok.
So basically now everything is back together, tried starting it up and it won't start and now i'm wondering if it would make a difference or not if the crank was rotated 1 additional revolution. Otherwise there is more significant damage.
Santa Fe (CM - 2007-12) :: Engine Vibration After Timing Belt Replacement
2007 Santa Fe GLS 2.7 V6. T belt replaced by dealer at 62K. Noticed engine vibration when picked up vehicle. RPM is steady, engine runs smooth, no error codes, no strange noises. Mechanic who did the work confirmed vibration problem and recommended bringing it back - had no answer on the cause but mentioned lose motor mounts which I doubt - the car ran perfect until the dealer did the work.
View 3 RepliesCivic - Honda :: 2001 - Timing Belt Replacement At 46,000 Miles?
My 2001Honda Civic EX (manual) has only about 46,000 miles on the clock and runs very well. My mechanic says I should consider replacing the timing belt (the manual suggests after seven years). I plan on keeping the car for many more years -- should I replace the belt now? How devastating is it if the belt breaks while driving?
View 5 RepliesHyundai - Accent :: 2008 - Timing Belt Replacement On Low Mileage Car?
Vehicle is an 08 Hyundai Accent 1.6L three door (hatchback) with 20,197 miles. This car was born on Oct. 16, 2007 and purchased in April of 2008. I told the owner to call the dealer and find out about when they should replace the timing belt as I had looked it up at the Gates site and found that it is an interference motor and also these Hyundai have some kind of lengthy warranty. When the tech or whoever she spoke to at the dealership asked about the mileage, they told her that she does not need to worry about the belt for about another five years, were rude and sounded inconvenienced by her calling. This leaves her with a bad taste in her mouth and more importantly, mis-informed.
I get the "Maintenance Log" out of the glove box and upon trying to decipher the timing belt interval, it states that the first course of action is an "inspection" at 30,000 miles or 24 months. How is a timing belt inspected? From what I have seen, a belt can look perfect today and snap tomorrow. But anyway, the next entry for severe service is replacement at 37,500 miles or 30 months which means this belt should have been replaced in October of 2010. Next entry is normal change at 60,000 miles or 48 months which puts us at April of 2012. After this it goes to 75,000 miles or 60 months.
I have already picked up the kit for changing the belt, tensioner, idler, and the two seals. How critical is it to change the spring as that was not included in the kit I got? I'm planning to do this job here in the next couple days as from what I can figure from the above log, It's way over due. I was reading some Hyundai forums and one stated that the 2011 model with the exact same engine calls for the first replacement due at 90,000 miles. How's this possible? Seems like these people (engineers) don't have all their stuff in one bag...
Golf IV / Jetta IV :: 2003 TDI Will Not Start After Timing Belt Replacement
I recently replaced a timing belt in a 2003 ALH TDI & since it will not start. When I took everything apart I found the belt extremely worn & the engine had actually slightly jumped timing. When I replaced the pulleys & belt & reset the timing to the way it would be from factory. When I tried to start the vehicle it turns over fine but will not catch. I double checked all the timing, fuel pump, everything - all okay. I can get it running with ether but will not start with diesel fuel. I also replaced the fuel filter, checked to make sure there was fuel at the injection pump but nothing works.
View 4 RepliesHonda - Odyssey :: 2002 - Oil Pump And Timing Belt Replacement
I think I made a bad decision. Almost a year ago, I purchased my used Odyssey. I cannot remember if the timing belt had been changed. My check engine light came on, and the mechanic I took it to indicated it was the seal on the gas cap. He proceeded to tell me that I have an oil leak coming from the oil pump and that I should replace it and while I'm in there, I should replace the timing belt. There were a myriad of other things wrong with it, including broken engine mounts (which I can get fixed elsewhere from the man I purchased the car from) and some other things he said I can spread out and are basic maintenance, but I said to go forward with the oil pump and timing belt.
View 6 RepliesPhaeton :: 2004 V8 Overheating Post Timing Belt Replacement
I just had the timing belt (water pump and thermostat) replaced in my 2004 V8. I drove it home from the dealer (75 miles or so) without incident. Drove it to and from work (4 miles) without incident for a few days.
Last night I drove ~5 miles, idled in a parking lot for ~10 min and then drove another 5 miles and it overheated. Once I shut off the car it would not come back on. I waited for it to drop below 200C and it still didn't start. Electric consumers would come on all was well....but no start.
Car was towed to the local VW dealer who do not have a phaeton tech. After the hour and half it took for the tow truck to arrive and half an hour to tow it....it started up.
I am now thinking about my next move. As I read through everyone's overheating experiences they are mostly
1. Failed thermostat (which one? does the bottom thermostat control water pump operation?)
2. Fan issues
3. Air in the coolant line following a flush (could be, but I drove it home in the cold on the first day with the heater on)
4. False readings due to a bum (upper?) thermostat.
I have a VCDS but have not been able to get out to the car to give it a shot.
Santa Fe (CM - 2007-12) :: 2009 - Check Engine After Timing Belt Replacement
I have a 2009 Sante Fe with 60,258 miles. I had the timing belt changed at 60,000 miles at the dealer. I now have a check engine light that shows the following two codes.
P0321
P0612
These codes are related to a timing belt change? Could a sensor have been removed for the work and not replaced correctly?
Acura - Integra :: 1999 - Timing Belt Replacement Affect Gas Mileage?
I recently had the timing belt replaced on my 1999 Acura Integra (which incidentally is a great car). Seems like my gas mileage has been down by a couple of miles per gallon ever since.
Is it possible that some normal aspect of replacing it would reduce gas mileage? This was a new shop to me--is it possible they did something to the engine that would reduce the gas mileage?
Mitsubishi - Montero :: 2002 - Code P0506 After Timing Belt And PCV Replacement
2002 Montero sport 3.5V6 , Miles: 130,000. Bought recently drove home over 2 hour drive no issues, Recent work: Timing belt (preemptive). All Serpentine belts, PCV valve (after timing belt job I noticed oil in exhaust)It gave a P0506 code and idling at 500 rpm after the timing belt job, found some oil in exhaust. Got the PCV valve replaced. That solved the oil in exhaust issue, but the code has come back. Drives ok, no issues, no smoke.I am going to clean the throttle body and install new air filter, today and take it on a highway drive (clean oil residue from cat). I had the timing belt work done at a very trusted place, but this time their game was not so good. Boss on vacation, new location and their work was somewhat careless not their usual style.
View 11 RepliesFord - Ranger :: 1999 - Broken Timing Belt / No Start After Replacement
2.5 Litre ... Okay, I've done this on other cars, both Fords without a problem but now I'm stuck on the no start situation. I have spark and my fuel pressure is 60 psi. About to do a compression test. Only issue with replacing the belt is that no matter how many times I try removing and installing it I'm always 1/2 tooth off after rotating the engine a couple of times but that shouldn't be enough for a complete no start. Tried starting fluid. Replaced cam sensor. new plugs. checked firing order. I have spark at #1 according to my test lamp which plugs inline.
View 6 RepliesPhaeton :: 2004 - Fault Codes 16405 And 16395 After V8 Timing Belt Replacement
We have an 04 v8 phaeton. Hubby just changed timing belt with the blauparts top kit. He rented their tools. When he went to attach the bar it didnt line up. He finally got it all back together and it runs fine. The vag com scares me, though.
Those codes say...
- 16405 bank 2 camshaft a (intake) p0021-002 retard setpoint not reached (over advanced) mil
on and the other
- 16395 Bank 1 p0011-002 retard setpoint not reached over advanced mil on.
He just ran the scan today and we are leaving on a 1500 mile trip tomorrow. He says he knows it lined up right...im doubting it. We have driven it about 500 miles since he changed it...no problem. I don't want to risk damaging something. Would you take it on a trip with that code?
Audi - A4 :: 2002 - Still Overheat After Replacement Of Water Pump / Thermostat And Timing Belt?
I have a 2002 Audi A4 1.8T with 85,000 miles. Recently my car started overheating, I replaced the water pump, thermostat, and timing belt. The mechanic also ran tests to make sure there were no issues with the head gasket, those tests came back saying the head gasket was a-ok. Yet, my car is still overheating but only on days when the outside temperature creeps above 90 and I am in stop and go traffic. I have to re-fill the coolant tank about once a week depending on how much I drive. I find no coolant puddles under my car when it is parked, so I do not believe it is leaking. What else could be causing my car to overheat?
View 2 Replies