Passat (B5) :: ST Coilovers Don't Go Low
Sep 26, 2011
So I just got new ST's last week. My rear drop ended up less than 2" at the lowest setting. I know KW's go low. Here are some pictures of the drop and coils. How to get lower?
View 12 RepliesSo I just got new ST's last week. My rear drop ended up less than 2" at the lowest setting. I know KW's go low. Here are some pictures of the drop and coils. How to get lower?
View 12 RepliesI picked up some Megan coil overs with plans to install them today, but can't figure out where one part goes. It looks like a spring spacer. The instructions are terrible and make no mention of what it is. My guess is it goes with the rear springs but...? [URL]....
View 24 RepliesHow do you adjust the rear height on coilovers? I have the ST coilovers which are comparable to the KW. Do I have to compress the spring and then adjust? I tried to do it with the wrenches given but the whole thing just turns with it. I'm going to lower the front some more and I want to do the rear as well. It is my first set of coilovers on a car and I had someone else do the install.
View 3 RepliesI just installed coilovers on my b6 passat(I will post pics when the problem is fixed)but back to where i started the ride is a big improvement then I thought. I was driving the other day and no problems until i hit a bump in the street/ not pothole. all the coilovers held up except the passenger side the bump dropped my suspension on the passenger side to where it now hits the inner linen in the wheel well it that low that I smell a burning smell when I drive.
View 7 RepliesI recently leased a 2013 Passat SE and I desperately need to eliminate the wheel gap. I know that SoloWerks has some coilovers available or our car, but I have a friend that has a CC on KSports and I absolutely love the way they ride. Ksport does not make a coilover for our cars, but I have heard that the CC suspension is the same. Looking for CC coilover setup on these cars yet? I'll be sure to post pictures once I get my wheels and eliminate the wheel gap!
View 3 Repliesi got my coilovers on and both the front and back are all the way down as far as they can go but they fronts are still about 1/4" higher. will the fronts take longer to settle in? ins been a few days.
View 11 RepliesSo, I am starting to look at coilover kits. I really want to have as close to stock ride height in the winter. Deep snow and chunks of snow/ice on the road are common here and I don't want to break bumpers. At least I don't want to break bumpers any more than a stock car would.
In the summer however, I want to lose the gap. Really given the last couple of winters, it would be really nice to be able to change the ride height in just a few minutes, without removing wheels or jacking the car up.
It seems that the coilover kits I have seen so far start at about 1" lower than stock. Are there any kits out there that start at, or close to, stock height? I know 1" isn't much lower than stock, but again I am trying to get as close to stock for winter driving. Is there something that can be added to these kits to push the max height up some?
Oh yeah, ride quality and cornering performance are important too!
So I've been searching and I could not find the answer to this. My car is sitting quite low on coil overs. I want to get this body kit but my question is:
How much lower does this body kit (more specifically the front lip) make the car? Does the kit go more outwards or downwards?
I'm reaching out to see if any other MQB platform owners who had DCC/Magride are experiencing suspension errors after upgrading to coilovers while employing a delete kit. Some of us S3 owners have been running into this issue after such an upgrade and using this kit by KW. I can throw a suspension error on demand in my S3 by taking a turn/curve at 40mph+ (highway on/off ramps work perfectly for this). A bumpy road or hard braking can also cause an error to be thrown.
Aside from the error being annoying sounding and looking it also re-enabled traction control. You cannot turn traction control back off until you've power cycled the car. This is a pretty annoying side effect that could also be pretty dangerous under the right circumstances. KW seems to think their kit is operating correctly and that the height sensors are out of range due to lowering the car. Currently there's no way to adjust where the height sensors sit so in my personal opinion this seems like a massive oversight on KWs part and their product is not working correctly.
I am adjusting my coilovers this weekend (Bilstein PSS10). Bringing them up a bit as the ride continues to be too rough for a daily driver. Would like to compare the height to stock.
Stock suspension height and wheels, looking for a quick measurement from the ground to the bottom of the fender edge (Across the center of the wheel) for front and rear?.
I have a 20th ae, and I figured how to lower the fronts a bit...but the backs, I tried searching but didn't find much......
View 3 RepliesInstalled the coilovers , took it for a drive , the rear end is just way to stiff. It seems like there was no rebound at all. We have the setting to softest. When installing the coilovers, the whole spring and shock assy was about 3 inches shorter than the OEM parts. We have to jack up the lower control arm to get it to mount. Is something adjusted wrong?
View 14 RepliesIs it necessary to get new shocks/coilovers when installing lowering springs? (and other concerns)
View 12 RepliesI just got 4 brand new tires put on balanced and aligned twice. Now when the wheel is straight i get minimal vibration. But if I turn left I get no vibration. When I turn right at all its a pretty medium loudness vibration. almost sounds like something rubbing. Now I just found out my coilovers are all messed up on height. If I level it do you think that will fix my vibration? the guy at tire plus said possible transmission causing vibration but the tranny seems fine to me. he also said if I raised it about a quarter inch it could stop it all together possibly. But I love being low....
View 16 RepliesLooking to upgrade my struts to a stiffer ride, without lowering it. I've heard that coilovers aren't that great as far as ride quality....
View 5 RepliesInstalled ST coilovers at 2200 miles, my only suspension mod. When I'm backing up or going at really slow speeds and turning there is a very annoying creaking/grinding noise. I've taken everything apart and looked at it again to no avail. Anything I should be looking for in specific?Could it be from over-tightening? Just thought I'd ask here before I take it to a shop.
View 3 RepliesSo let me start off with telling you I only ha email 6500 miles on my car now. At 800 miles I installed h&r sports springs on the stock shocks and struts. No noises what so ever. Now I've had PLENTY of time on the drive on them and just not happy with how low I am. I ordered a set of solo werks coil overs, to put on until I can afford a bag setup. My question is, should the bearings be changed now, or am I still good with them being low miles? What's the mileage, that most people are installing and getting this sound?
View 6 RepliesInstalled coilovers last weekend, and heard a clunking on the rear drivers side. I figured i'd let it settle a week before going back and double checking everything and setting the height i wanted, but everything seems tight and it still clunks when i go over bumps.
I realize I can speculate all i want online, but I'd like possible causes before I start digging.
- top strut mount gone bad (there a way to test this?)
- top strut loose (either to the car or to the strut itself)
- springs not seated perfectly
And I have searched, but i cant find any possible solutions.
I am installing my coilovers on my gli and I have everything installed but the passenger side coilover. I cant even remove the old strut because the damn lower strut mounting bolt is seized and I've been trying for hours to remove it at no avail. I have used pb blaster, my heat gun, and my sweat. I dont have impact tools, just my ratchet..
View 15 RepliesHow can one tell? V6 heated seats, 16" wheels. Seams like its a glx? Are there more options between the 2?
View 7 RepliesMy cel came on yesterday so I immediately took it to get scanned the problem is that my fuel air mixture is running to rich or I have a faulty cc will getting the code cleared solve my problems or what needs to be done to solve the problem....
View 5 Replies