On my W8 sedan the passenger low beam is out and it looks like its an HID headlight... How do you change them in these cars? Also is it HID? It's odd sometimes it is on and sometimes it is not, but today I think its out completely...
View 4 RepliesMy passenger side headlight(low beam) isn't turning on. Replaced the bulb. The light flickers and dies out.
View 1 RepliesI am having an issue with the passenger side low beam headlight on a stock 02 Passat. Bulb is fine but after testing confirmed no juice to that side. Drivers side works fine as do the running lights on both sides. Fuse is fine and after an afternoon of looking at it I am about ready to beat my head up against the wall. Only other clue is the cig lighter went out about (not sure if the exact) same time.
View 2 RepliesI know that headlight lamps burning out is a common problem with the Passat. My passenger side low beam lamp will be replaced for the 4th time today! Checking my records I replaced this same lamp on my 2002 Passat in 6/04, 12/05, 2/08, and now 12/08. The driver's side lamp was only replaced once in 2/06.
Fortunately it is an easy job and I am always careful not to touch the lamp glass with my fingers. I am wondering why the passenger side would burn out much more often than the driver's side? Is there a better brand lamp to buy than the Sylvania Silverstar that I have been using??
I have an 07 Passat Wagon. The headlight malfunction indicator light came on for my passenger side low beam. I replaced the bulb, which was visibly burn out (broken filament), but with a new bulb in, the light still is not working and the malfunction indicator is still on. What is the cause of this? I have the regular headlamps, not the xenon lights.
View 2 RepliesThis morning a dash light informed me a headlight bulb was out. It was my DTR light on the passenger side.
I purchased Sylvania H7 high intensity, installed it and it failed to work properly. Daytime light on only drivers side works.
High Beam on , both lights works.
I checked my manual and it said to check fuse in the 5 slot on the driver side dash/door panel and there actually is no fuse in there. I checked the driver side and there was no fuse there either.
I replaced my driver side bulb last year and it took 5 mins....i am already 4 hours into this!
So today I got in my car and my mfd said dipped beam failure, so i checked and my passengers headlight was out. Is this a simple replacing the bulb job or something more serious?
View 8 RepliesLooking for detailed instructions on replacing the low beam passenger side headlight on a 2004 Phaeton...
View 1 RepliesSo I had an issue with my hid lights, I replaced one ballast and 2 new bulbs and they work fine now but the passenger side is stuck on high beam. When i turn on the brights only the driver side gets brighter, how to fix this? I only replaced the driver side ballast
View 3 RepliesMy friend with a 2007 SC430 is having a recurring problem with his passenger's side headlight. The HID low beam keeps periodically going out, then will start working again. When it isn't lighting up, it's doesn't work on either the low beam or the high beam settings, while the driver's side lamp is working fine (driver's side low beam lamp is on with high beam lamp when high beams are engaged, and driver's side lowbeam lamp on as normal with low beam engaged).
He has replaced the passenger's side bulb with a Lexus OEM purchased from a dealer back in November which seemed to fix things for a while but now the problem is back again.
What the cause(s) could be and how to troubleshoot? He previously owned a 2002 SC430 for 6 years and never once had any headlight issues or even had to replace any bulbs, and the 07 is giving him this grief now after barely 3 years of owning it.
I have a 2006 elantra. I just got it back from having a new clutch put in. My passenger side headlight, low beam, no longer works. I tried two different new bulbs and it still doesn't work. All the other lights on the car are working, including the high beam and running light on the passenger side. Is there something that would have been disconnected when they replaced the clutch? Is there something I should check?
View 1 RepliesLately I noticed that my headlight beams are crossed between passenger and driver side....
When I start up the car, the headlights move down and up for the initializing... all seems fine... While I backing my car out of the garage, I notice that my light beam start to drift closer to each other as I back out further and then finally crossed... the beam from my passenger headlight ended up on the driver side.... and the beam from my driver headlight ended up on the passenger side.
My AFS lamps are working and initializing when the car turn on.
I have a 2006 Prius that I purchased with no upgrade on the headlights. There was an upgrade available for high intensity lights, but, I didn't get them. The low beam on the passenger side headlight just stopped working. Two questions:
1. I was just told by the Toyota dealership that to replace the headlight, the entire front end of the car would need to be dropped. They just told me that with them supplying the bulbs, the cost would be about $250 plus tax. If I supply the bulbs, only about $200 plus tax. My owners manual indicates that this is a do-it-yourself project. Is this true or is the dealership trying to make money off of me?
2. When I do replace the lights, I would like to put in something that would put out more light than what I have now. I have been told to be careful because many replacement lights throw off so much heat that the housing around the bulb could melt. Also, I have read that some of these replacement bulbs have a very short working lifetime of 1-2 years. Obviously, I would want to keep away from them.
I just had my pass side head lite burn out.....or at least I thought? I replaced the bulb twice......not touching either 1 with my fingures.......and I have no low beam on that side? Only hi beam on the pass side? All my fuses are good, and I even unhooked all my plow harness.
View 4 RepliesI have a 2006 VW Passat which has been eating low beam bulbs. I've probably replaced this one 4 times in the last 12 months. The last time I replaced was 2 days ago with a Sylvania bulb. Yesterday on my way to work it burnt out. Then on my way home last night I was pulled over by a cop for it. That really annoyed me.
Having issue with Passat burning through headlight bulbs? Do I need to have the wiring assembly checked or possibly replace the entire headlight assembly? I'm getting really tired of changing these bulbs so often.
My front low beam headlight is out and I only have 2,500 miles on the car. Was it replaced under warranty? If not how can I find out how to replace it myself?
View 8 RepliesReplaced both bulbs (left and right even though only left was out) with fresh H7s and my left headlight still doesn't work. so i thought, maybe fuses, but manual only references fuse #5 on both left and right fuse boxes as headlight control - but for XENONs only. Since i don't have HIDs, there is no fuse in spot #5 in either fuse box. Any other fuses i should check that i may be overlooking in the manual?
View 3 RepliesWhere can I buy the bulb and what is the model number/size of the bulb? My headlines aren't customized or fancy. It's regular. I need to replace the right/passenger side. And how do you replace it? I'd like to save money. I read somewhere that micro clamps are necessary (for 2003 model at least) because it's hard to get in or out? If there's a DIY tutorial with pictures, that'd be great... I drive a 99 1.8 Passat...
View 3 RepliesI bought a replacement bulb, swapped it out. No dice. I swapped over the passenger side low beam and still no dice. At this point I know its not the bulbs. I swapped in the original Driver's side light to the passenger side and it works. So now I have an extra bulb.
But the light is not working when I know the bulbs are good. Is this a fuse problem? It just happened one day while driving home from work the light shows up.
How should I go about fixing this and is it most likely a fuse that has gone out or something far worse?
I had a low beam bulb go out a month ago on the driver side. I bought some silvania silverstars to install on both sides. The drivers side went fine but as I installed the passenger side the inside reflector housing came loose, apparently popping off some spring clips inside the headlight housing. The passenger side headlight assembly now pointed towards the ground 10 feet in front of the car... I tried to adjust the screws to bring the light pattern back up. No joy.
Anyway I messed and messed trying to get the reflector housing to fit back on the spring clips. I ended up having to pull the bumper apart and the whole front side of the car to totally remove the headlight assembly. Once I got it out I found these little ball/socket spring clips and was able to put the assembly back together.
Now my issue is I have lost track of the adjustment screws and where the headlights should point. Any formula such as, "park your car 10ft from the garage door on the flat level. The low beam should be 30 inches off the ground on the bottom and the 40 inches at the top. The beam should be 50 inches from the center line of the car" Something like that so that I can get my headlights back to factory settings.
I need to replace the low beam headlight on the drivers side. Any quick way to do this, and how much and what type is the bulb?
View 3 Replies