Passat (B5) :: No Start - Shifting Gears Allow Starter To Engage
Dec 12, 2011
2003 Passat 1.8t FWD.
My buddy is having a wierd issue that just recently started after it's gotten cold out. The car would not start for him so he had me look at it. Attempting to start there's no sound from the starter at all. Battery is fine. When I shift in and out of a few gears, the starter engages and the car starts. Stop the car. Attempt to start it again and nothing. Shift through the gears some more and the car almost starts but quickly dies. Shift some more, start, running like a champ.
What is it about shifting through the gears that allows the starter to engage and the car to run again?
View 3 Replies
Advertisement
99 Passat1.8t auto, transmission doesn't engage into any gear ... Cluster shows that all gears selected ....
ATF level OK and VAGCOM doesn't show a ny codes/errors for trann When I put D or R - car revs up to 1200RPMs and thats it Checked ECU and TCU (tranny computer) no signs of water in them I don't really know history behind this vehicle but it had been sitting from 2009, had run before without problems (at least thats what previous owner told me) ...
View 7 Replies
My Nissan sentra will start on the coldest day, but now that it's getting warmer it sometimes won't start! Turn the key and I have power to everything, but engage the starter and nothing! Not even a click! Try and try and eventually it starts. What could cause this??
View 7 Replies
I have 2007 Santa Fe LTD which will intermittently not start. All electrical devices work fine but when you turn the key the starter will not engage. Keep trying the key and after 5-10-100 try's the car will start. The next time it may start on the first attempt or it might not. Sometimes it will go weeks without a problem then it will not start again. I have checked the starter relay, battery, and cables. It seems like the alarm is faulty and not letting the power get to the starter.
View 16 Replies
i have an 06 passat in manual, to put things short i was racing a friend last year on the highway and went from 5th to 4th at 120 thinking it was 6th and let the clutch grab ...needless to say i messed up the clutch and 2nd 4th and 6th gear felt like i was shifting into oatmeal if the RPMs were too high, BUT they would still grab.
thinking i only messed up the clutch setup, i went and got a clutch masters stage fx300 stage 3 kit with the steel flywheel (plan on going big turbo by summer)
after the shop installed the clutch, im getting the same results, better grabbing from the clutch in all gears EXCEPT FOR 6TH! 6th wont engage at all
so now im thinking i actually damaged the actual gears.
View 3 Replies
My 1994 Subaru Legacy has been running unbelievably smoothly for the 7 years that I have had it. It has just over 160,000 miles on it, and our mechanic suggested that we change the timing belt as preventative maintenance. Since that incredible investment (worth over 50% of the car's value), I have had one problem after another. Once running, the car runs very well, but getting it started is another story. It takes several tries to start, it shakes back and forth, it makes horrible noises, and once the engine finally turns over, it is hesitant to engage the gears. The mechanic thought it may be the cam sensors, so he replaced them. That made absolutely no difference. What could be wrong with this car that was perfectly find until the timing belt was changed?
View 4 Replies
This past monday morning I got in my 05 Legacy GT w/ 82,000 miles. When I turned the key it acted as if the starter engaged for a second then disengaged and made the typical motor winding sound. I tried it several more times with the same result. So I reluctantly called my local repair shop and had it hauled over for what I thought was possibly a bad starter. The mechanic went out to check it to see what it was doing and when he did, it started right up…..!! He said that when it started it ran as if it had been flooded for a minute or two then cleared up. Throughout the day he drove it around and started it about 20 times and said it “appears” to be ok. It’s a small shop that I trust with my other cars but they don’t have the tech to pull codes on a subaru. So my question is, what was the cause of this issue? Neutral Switch? Cam Sensor? or a Fluke?
View 1 Replies
It only happens sometimes, but definitely everyday. I have an 06 Passat 1.8T and when i'm accelerating and it shifts gears from 1 to 2 it sounds like i have a really bad blow off valve, yet i don't. I can't see anything noticeable under the hood. I am thinking its the turbo inlet pipe.
View 3 Replies
Hard shifting from the car. sort of a slam between gears and while in gear.
Possibly a mount?
View 7 Replies
My car is less than 2 months old and randomly in low gears the car will jerk or lurch when shifting gears. Is this common or does this need to be looked at?
View 18 Replies
When I used to change gears in my car it would feel smooth and precise, but just today when i was shifting in to 2nd, my gears started to feel clunky and like they were getting caught up on something. It feels like I'm not even engaging a gear when i put it into gear. Its so effortless and i don't get that secure feeling that i know i am in gear anymore.
View 4 Replies
I've been driving my daughter's Nissan for the past week, trying to figure out what's going on.
Car has about 124K miles. Automatic transmission. Two things happening, neither with total consistency:
(1) Sometimes, primarily from a cold start, car will not shift gears. You'll go past the speed and RPMs where you would have expected the gear to shift, but engine whines on. When you let off the gas, it then shifts. Same from 2nd to 3rd. While in this mode, would not seem to stay in 4th - would briefly shift in (for about a second) , then return to 3rd.
(2) Other item - more frequently, primarily from a warm start, but also from a cold start - car shifts gears at proper time, but there is a distinctive "jolt" as it shifts from 1st to 2nd; not really noticeable in higher gears and the "jolt" can vary in intensity. Almost feels like a broken motor mount, but don't think that's it.
Doesn't happen with scenario (1) described above. Also, while in this mode, I noticed, while highway driving, that if I was at the bottom of a long hill, going 60 and floored it, there would be no power surge. It was not downshifting into 3rd like it should. I would have a long and slow acceleration , with the tachometer holding steady at about 2700 RPMs, not climbing as you would expect.
But, if I was going about 50, then you would get normal hill climb acceleration.My mechanic - whom I've dealt with for a long time and trust - had wanted me to drive it awhile and see what was happening before bringing it in. When describing these symptoms to him, his reaction was "Hmmm - doesn't sound good" but without the quick diagnosis I'm accustomed to from him.
View 3 Replies
I've had 2 Elantra 2012 models 1 a gls the second a limited. As far as transmission issues both Elantra's from a cold start after allowing RPM's to idle down before taking off they both have started shifting hard going from 1st to second gear 1st car was around 8-9 k miles now 2nd started at 3 k miles. Since owning 2 cars same make same year same transmission and many times to dealer 1st car ended with Transmission replaced 2nd has now started doing the same thing they reset adaptive and next day did it again its now back at dealer waiting for them to diagnose again.
View 13 Replies
I own a 2005 f-250 superduty with the 6L diesel. Just recently when I leave to work in the morning I notice the trans shifts slow through the gears and when it does start to shift it will start slipping then kinda vibrate for a few seconds then finally shifts into the next gear. It will do this through all the gears until I get up to speed on the highway. After it warms up it shifts and drives great until I let it sit for around 8hrs or more. I really hope I don't need a new Transmission considering I bought this truck as is from the dealership just a little over a month ago. I have checked the trans fluid it is full, I even drained all the fluid and replace with new and it still does the same thing.
View 4 Replies
MKIV jetta GLI, first two gears just won't engages as if it's still in neutral. Have to start her moving from 3rd. What could be the issue?
View 14 Replies
I went to leave today and found the 2012 Accent (auto trans) won't start. The starter doesn't even try to engage.
Battery voltage was 11.5 both when turning the key to start, and when just in the accessory position.
I put jumper cables on it from my truck and left it for 5 minutes. Voltage was now 13.5 but it still wouldn't try to crank.
What to easily check? I plan to call the dealer in the morning and have them come get it since I only have 17,xxx miles on it.
View 21 Replies
So yesterday I drove to my friends house b4 work. My car started up just fine no problem. I was at his house for maybe an hour and as I was going to leave I tried to start my car and it was dead? All my lights work got a jump. Still nothing so today I took my starter off and had it tested( fail). Paid for a new one and put it back on. Hooked everything up. Went really smooth. But went to start it and it won't engage the flywheel? Am I missing something?
View 1 Replies
A few days ago when it was real cold my car would not shift into any gears. I shut it off and started it in neutral and was able to get it to shift, but after leaving it for a day or two it now will not go into gear. I have tried starting it in neutral and park, but it still will not let me push in the little thing to allow me to shift into reverse or drive. Why this might be happening or had this happen to them?? I'm thinking it might be related to the really cold weather. It's a 97 passat...Automatic....
View 1 Replies
my 91 525i wont engage 1st gear..fluids fine..nothing smoking...fluid levels great. color correct in fluid appearance..reverse works..no funny noises from rear end..car just will not shift above 1st. i have replaced transmission filter and fluid.
View 1 Replies
own a 2005 Hyundai accent 1.6L engine. I replace the engine today. The previous engine had internal damage. The transmission I left alone. I didn't disconnect the wiring. I only removed the engine. The transmission worked flawless. When I turned on the car the engine sounds great and the transmission sshifted gears and the wheels were moving. The speedometer worked so then I turned the engine off and lowered the car down from the Jack stands and tired it shine but this time the transmission did not shift gears. I lifted the car back up and did still did not shift gears. The transmission does nothing. The checked the guild level and it's full. What can cause a transmission to suddenly stopped engaging gear?
View 2 Replies
148,000 miles, and yesterday my R decided it would no longer allow me to use first gear. It sort of starts to go in gear, but feels kind of mushy, not positive, and if I let out the clutch, the gears grind, but will not engage. All other gears feel and perform normally.
View 7 Replies
