Well I guess it's already happening. My low beams don't work. I've checked the fuses. My high beams, running lights, fogs work... but not my low beams. Seems weird that both my low beams would go out.
View 24 RepliesMy truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 RepliesI have checked fuse 46 and 47, and installed new headlight bulbs. I have high beams, but no low beams. I have searched this topic but no one has the same prob it seems. My headlight switch has broken. Could it be the headlight switch?
In my manual, it says the 2002 has a fuse panel behind the glove box. I took glove box out but it doesn't look like a fuse panel.
I want to replace my headlight bulbs; I want to install 8000K in my low beams, and maybe 3000K in my hi beams. But all of the bulbs that I ever installed either; A the burnt out within few weeks (lost color), or B they stopped working.
Now, regular WHITE bulbs seem to work forever; but the color ones, burn out/break. Low quality?? I need a pair of very good 9006 8000K, and 9005 3000K. Again, but I don't want to change them in a week or two. I want them to last!!
P.S. 2005 Toyota Camry
I recently installed new halo HID headlights in my 2003 f150 with HID bulbs and ballast the passenger side worked and the drivers side didn't nth lights wired exactly the same. I switched everything from the passenger to the drivers side still nothing I switched everything back to passenger side and they don't work now. I tired regular bulbs in the passenger side an it worked then on the drivers side and it worked for a split second and went out and then I retried t on the passenger side and it worked for a split second and went out a now neither are working. I checked all the fuses and their good. What the problem could be?
View 5 RepliesHave a 2003 Passat GLX wagon and the daytime run lights and low beams will not come on. High beams and fog lights work. Have changed fuses and bulbs with no result. Wire harnesses appear in good shape. 56,XXX miles. Still have a 2000 GLX with 165,XXX and never experienced this before.
View 5 RepliesI have a 2010 prius the basic model I turned the lights and both headlights went out they only worked on high beams.
I changed the bulbs no luck they still only work on high beams checked fuses they looked good is there anything else I can check?
After spending weeks ordering parts and doing research on this issue all my attempts have not solved the issue. To reiterate the issue, the high beams work, and the low beams do not. Thus far I have attempted the following without the desired result-
1. Changed the headlights out just in case both bulbs burnt at once.
2. Changed the blinker stalk in hopes of a faulty switch.
3. Changed the headlight switch to a brand new OEM Euro style switch.
4. Checked all fuses (did this first actually).
The other night on my way home, I flipped on the high beams and the low beams didn't shut off. Flash to pass still works, and pushing in on the end of the stem turns the low beams off as well.
Having the column switch apart, is it possible this could be fixed without having to pull the steering wheel? Or, am I better off just spending the hundred dollars of so and putting in a new part?
It ford related but I just bought a used car that has hid low beams and when you turn on high beams there is no light at all. The blue light on dash comes on and head lights go off. I just got this car 2 days ago and haven't really looked into it.
View 5 RepliesBoth low beams are not working. No DRL, but high beams and internal fogs work. Both low beam fuses are OK. I'm guessing the switch?
View 2 RepliesMy low beams are out of adjustment. just wondering where the screws to re-aim the projectors. its a Hella factory headlight housing if it matters.
View 4 RepliesInstalling hids in there low beams? i did a few hid kits on my other cars in the past no problem but i never did one like this were there's no wire going to the light bulb. where do you wire the ballast into to and how do you connect em?
View 14 RepliesJust purchased and installed a set of Chinese HID and LED DRL headlamps. What's the proper way to align the low beams? Feels like too much light hits the road right now. Also, any way to adjust the "step" in the beam pattern. ___/---- My other vehicle has factory HIDs, and the step is hardly noticeable - looks more like this: ----/---- .
View 24 RepliesI just purchased this car and the low beams do not turn on when you turn on the lights. Right now I am driving with te DRLs at night. The high beams works perfectly. The fog lights do not work but I have not checked the bulbs (although the indicator lights on the dash works.)
Also looking for diagram of relays. I looked at the fuse panel and see a lot of empty slots. I have relays numbered 18, 21, 99, 36, 110, 53, 167 on the fuse panel. Could I be missing any?
I just had my car coded for aftermarket HIDs and i have no high beams and a bulb out indicator on. did i miss a step in the VAG coding or will the high beams work when i put the HIDs in?
View 6 RepliesI have a b6 Passat and the high beams are not working. I am going to be installing HIDS in the next week or so so I located a vag com disabled the drls and enabled Xenon without the shutter. now no high beams. they will only work with the car off and pull back the switch instead of pushing it forward.. I'm sure there are ppl on here with HIDs and there high beams working on a b6.
View 9 RepliesMy regular beam light stopped working today. If i pull back on the high beams, both come on and work, however, if i push the lever forward to leave them on permanently, they don't come on at all. Is this because the regular bulb is out, or is something else wrong?
View 6 RepliesI just purchased this car and the low beams do not turn on when you turn on the lights. Right now I am drivig with te DRLs at night. The high beams works perfectly. The fog lights do not work but I have not checked the bulbs (althought the indicator lights on the dash works.) Also, any diagram of relays. I looked at the fuse panel and see a lot of empty slots. I have relays numbered 18, 21, 99, 36, 110, 53, 167 on the fuse panel. Could I be missing any?
View 1 RepliesI want my fog lights to turn on with my low beams when they are set to auto.
View 4 RepliesThe adjuster is located for the high beams, on the B6. Dealer adjusted the low beams, on the wagon yesterday, on third visit, and now the high beams are looking the space station. No light on the road. So, I thought I would lower them instead of going back to the dealer.
View 3 Replies