No interior lights work, so I checked the fuse # 14 according to the manual. Fuse is good, and the hot side of the fuse socket has 12+ volts. I pulled down the main interior light switch that's housed with the sunroof switch, and there's no voltage there at all.
View 1 RepliesI recently tried to install some LED bulbs in my ride. And they all worked except the map lights in the front. I removed them all and now no lights work when I open my doors except my foot wells.. Any one know whats up?
View 7 RepliesCar is a 2000 Passat, 1.8t, APR, Forge Splitter, DV relocated, lowered.
Recently, the interior lights would randomly work and then not work when ANY door would open. Now all interior lights work at all, but the dash lights DO WORK as well as all the lights in the dash. It appears that the issue is isolated to just the map/reading lights. So no map and reading lights whether ANY door is open or if the switch is placed in the on position, this goes for the front, rear upper side lights, and the trunk light. The glove box and under door lights don't work as well. Consequently my drivers side window stopped working as well but I am thinking that may be a separate issue seeing as how the window kind of had a mind of its own before this all happened.
Things that I have checked:
1) I first thought that the microswitch in the drivers door was toast but the door alarm still works when the drivers door is open, the power locks still work, and the headlight alarm works when they are on and drivers door is open.
2) I checked the two main fuses for the 'Comfort Control' Systems. They were both fine.
3) I check for continuity across both of those circuits at the fuse block, the circuit is complete.
4) I checked the continuity of the fuses, they were fine.
The only thing I haven't physically checked is the CCM itself. I want to believe that this isn't the issue since I am religious about cleaning out my drains in the battery tray and door jambs.
I have a 2010 Accent GS. I was trying to change the bulb in the trunk light. I changed the bulb and now none of the lights inside the car work-- map lights, dome light, trunk light. I figured it was a blown fuse. I looked at the fuse box inside the car and I think I found the fuse I think it's the one in that yellow box that is in the right side center of the fuse box. How do you pull that thing out? Are you supposed to pull out the individual fuses. I pulled the yellow box. It only comes half-way out. How do I check that little 10 amp fuse inside that yellow box?
View 3 RepliesI tried installing my led interior lights and I got most of them in. I went to lock my car and the beeping noise didn't go off and my windows wont go up. My interior lights don't work and my hatch won't open.
View 3 Replies2005 Nissan Quest with 80k. No interior dome/map or door lights work. The instrument cluster and center column lights all work. Basically all the bright lights are gone but you can see speed, radio, etc. Have changed every fuse inside the van with no luck. Inspected the fuses in the engine compartment and none seem to be bad. This all happened after i some IKEA boxs, wonder if something got knocked loose that i cant find.
View 4 RepliesHave a 2012 350 cclb 4x4 6.7 lariat, interior lights don't work. Not with any door open, Not with switch. map lights work. We've checked every fuse in cab and under hood. What to check now ?
View 8 RepliesTrying to get my trunk light to work. I pulled the bulb and the filament is intact. I hooked a meter up to the connector and I'm getting 10 volts. The bulb is a 12v.
View 4 RepliesTook the stereo out and snipped a white/red wire abd connected them back together and now my interior lights, windows, wipers and trunk button wont work.
View 3 RepliesOn my passat, the right passenger door handle does not work from the inside. I recently had the window replaced on that door because window slipped.. But since i got the window fixed, the handle inside does not work properly. It opens the door, but you really have pull and push the door open. I only found one screw at the bottom of the panel inside to take it off, but the rest of the panel feels pretty tight, and i dont want to break anything either.
View 4 RepliesNeed to know if the little icons on your interior 'dome' lights illuminate red when your instrument cluster lights are on? (Just like the power window and dash vent icons..) Audis do, but I've never seen a W8 Passat at night to be able to tell.
Looking for a pic of your interior roof lighting? (Not the center console one near the sunroof control...that of course lights up and shows icons.) I'm looking for the ones towards the rear of the car.
I got Corolla 2012. Dome light fuse 10 amp is blowing off as soon as you put it in. Light bulbs checked seems it is not a problem. Maybe relay?
View 11 RepliesI have interior lights at my feet and the passengers that are on at night. Anyway to turn these off?
View 3 RepliesI went to a stereo shop to have all my doors covered with DynaMat. They did a great job there but now I have an airbag error. How do I reset this? I do have a VCDS cable. I know it was because the battery was not unplugged before the door trim was removed so I'm not that worried, just wondering if VCDS can take care of it or I MUST go to the dealer.
My other issue are the interior lights. I had them all replaced with LED bulbs and when I left the shop I turned the map lights on and all was good. I left the shop to put some fuel in and when I started the car again I had no lights. Now NONE of my interior lights go on. What Happened? I've seen plenty of people with LED bulbs in their cars so I didn't think anything could go wrong? Do I just go back to the stock bulbs?
I have a 2006 passat and today when i was switching the bulbs out with different colored ones and the lights just went out along with the visor lights. I have checked all the fuses and bulbs to make sure they just didnt blow. There isnt much on the internet about this topic. What i have found out on the net is it could maybe be the (CCM). But i am unable to find that also.
View 2 RepliesThe door latch is broken so i need to change it, but i am going on a day trip to Quebec. Now, when i drive with the lights on there is a buzz, the same buzz when your door is open when you drive. I looked at the fuse diagram on that little card but I could not Id which fuse to pull to stop that wretched noise.
View 3 RepliesThe last month or so, I have noticed that my dash board lights (red lights) and my actual interior lights that come on when you open the doors to vehicle will flicker sometimes...And it can get bad I guess and annoying. It's more of it pulsating really. I noticed today while driving home and I had the radio on loud it was doing it and I do not know if was just in my head that it was doing it more when the radio was loud or what, but this is ridiculous.
View 3 RepliesMy interior lights, including mirror lights and overhead interior light keep blowing my fuse. This is the 3rd fuse that's gone in a month. I am out of warranty finally. Would it be safe to upgrade the 5 amp to a 7 or 10 amp fuse. I am not about to chase down a possible short through my headliner/dash...
View 14 RepliesMusty odor TSB. I noticed today that when my car is parked and idling my interior lights and MFD "surge" when the seat heater is on, is there a TSB for this?
View 6 RepliesBasically I lost power to all interior dome lighting, front and rear, i only have power to the front footwells. it happened when i tried changing/replacing the rear map lights while the car was on, i know i know, the car was suppose to be turned off, should i take my car to the dealer or is it a fix i can do?
View 5 RepliesOkay so I was trying to change my rear reading lights, but the lights started to flicker on and off, I thought the connecter was loose.
Stupidly I took metal pliers and bent the connectors a little closer to each other. And now the interior lights don't work =.=
Could the metal pliers on the metal connectors have blown a fuse or something?