Passat (B5) :: How To Take Off Driver Side Back Door Panel
Jun 2, 2010
My back door has pretty much lost all power, so how to take off the panel.
View 1 RepliesMy back door has pretty much lost all power, so how to take off the panel.
View 1 RepliesHere's a video of how to remove the interior drivers' side door panel.
You'll need a t30 torx driver, trim/pry tools and a pair of needle nose pliers. It's really easy and the parts are pretty durable.
As I pull off the panel you can see that something falls out of the bottom. It's one of the t30 torx screws that gets rotated 90 degrees. It simply pops back into the hole.
I had to wrap it up quickly at the end...a bee flew in the shot and I'm allergic. I think you can see the panic in me even though I'm not actually facing the camera.
How to remove the rear door panels I made a thread for that awhile ago. Here's the link to that one: [URL] .....
I have a 2008 passat and i want to remove the driver door panel. Well I did the search found what I need to do it, but every search result says to pry off the window controls. I was tugging and pulling all this morning and never could get it off.
View 4 RepliesHow do I remove the drivers door exterior pillar panel from a 2007 vw passat. I have a dent in the panel and want to replace it..........
View 3 RepliesEvery time I open my passat driver side door it closes back on me as I get out.. How to tighten the hinge so the door will stay open..
View 13 RepliesI'm at a complete loss, My drivers side back door has stopped working, Alarm, window and lock, I've checked my fuses, and it seems i only have 3 doors in the fuse box, what are the numbers to the door fuses in the box.
View 9 RepliesI need to know how to remove the driver-side door panel on an 87 DeVille Sedan. My son just bought his first car and none of the windows work, checked the breaker, it is good. Our next plan of action is to remove the panel and see if anything looks 'off'.
View 3 RepliesI guess it's more of an annoyance thing than anything else. When I drive I like to rest my knee on the this area where the window switch is. If I drive over a bump etc...this area squeaks. Is it worth having the dealer fix or will it just return.
View 8 Replies2012 Golf TDI. I'm trying to find the actual part number for the rear, driver's side door panel (door card). I've found some listings for the actual panel but none that provide the part number. It's the one that has the aluminum insert w/o premium audio.
#1 in this diagram.
My automatic door lock is making a buzzing noise when it locks the door. It does not make any noise when unlocking. I need to remove the door panel to take a look. How to remove the panel on the drivers door of a 2000 Dodge Grand Caravan?
View 4 RepliesI can't figure out how to open the door panel driver side.
View 6 RepliesI've taken the driver's door panel off, and unpeeled the liner. Now that the door is naked and exposed, I'd like to fix several things at once, rather than wearing the adhesive liner out by sticking and unsticking several cycles.
Here's a short list of some potential fixes I foresee taking care of while in there, how to :
1. The door ajar light. Mine went out over a decade ago, and the gallon of WD40 I sprayed into the latch did NOT fix it. In fact, it turned it from an intermittent issue into a permanent problem. I'd like to fix it now, as I miss having a light at night when the door is open. How do I fix it? Links, part numbers, tips, pictures, videos, search terms... all info welcome.
2. Bottom door rust. I don't really have much, but I see very faint hints of paint bubbling under the lower door weatherstrip barrier, which I have also removed. I've read about two schools of thought on preventative maintenance.
A. Pour oil or grease into the bottom of the door.
B. POR15 paint in the bottom of the door.
So basically, oil or paint? Obviously, one can't paint if one does oil, but on the other hand, some say that paint... especially thick paint like POR15, can actually do more harm than good by trapping moisture in the bottom pinch flange, or by creating craters or tunnels where water can burrow and then get trapped, rotting the metal away. What are your thoughts and experiences on this? I'd prefer a solution that minimizes the number of times I have to unstick the interior liner from the door.
3. I'm doubling the lower door weatherstrip with a combination of the older and newer designs. Ford sells the weatherstrip with clips attached, but neither those clips, nor the original clips, are really effective for what I'm trying to do. I've already done the rear doors, and made it work with the original clips, but they are brittle, and I lost a couple to breakage. Today, I broke three clips pulling the old weatherstrip off of the door.
I can't find these clips anywhere locally... I've tried every variety the auto parts and auto body stores sell, and Ford doesn't sell these clips separately from the weatherstrip... and even if Ford did, they OEM clips are not long enough to hold the double deployment of old and new styles of weatherstripping.
In searching this issue, it appears that a lot of people have broken these clips, which stands to reason with plastic in baking inside a hot door for 15 years. I'm sure I'm not the only one who would benefit from finding a good source of automotive clips.
4. Mirrors. I'm finally getting around to this, and this is what motivated the door panel removal in the first place. I need the dog bone harness that converts from a round connector to the flat style connector. Specifically, I need part numbers 1C3Z-14A411-AA and 1C3Z-14A411-BA. Ford didn't originally sell these dogbone harnesses separately, but included with the purchase of newer style outside rear view mirrors in case the translation harness was needed. Sometimes it was, sometimes it wasn't, so there would often be these unused harnesses left over.
5. Jimmy Jammers. Will they cause more harm than good? Does a better alternative exist? Thinking of installing these while I"m in there, but worried the door will be damaged worse as the thief tries to fight their way in. And, with body on shell doors, there appears to be much easier ways to break into an SD anyway, so part of me thinks, why bother
I need to find a diagram of the door panel on the drivers front door. Need to see how to remove the switch bezel to check the power window switches.
View 2 RepliesI have a 2008 Toyota Yaris. A few weeks ago my driver's side rear door stopped unlocking with the button on the key and the button on the driver's side door panel. About 2 weeks ago it started to work again, but just for 1 day; then it went right back to not working. About a week ago my passenger side door did the exact same.
I looked up the issue online and found that people with 07 RAV4s. An owner a RAV4 took the actuator in the door apart and found that the copper contacts had charred. After scraping with extremely fine sand paper and steel wool, and then reassembly of the door, the lock worked.
i need to get my door panel off to try to pop out a dent.. are there any write ups on removing the panel..
View 1 RepliesHow to remove the drivers side kick panel? It has the hood release lever, which is holding me back from figuring out how to get it off. I don't want to keep experimenting because of the chance of breaking something. I'm trying to install some after market speakers and need to get behind it to run the speaker wire to the door.
View 3 RepliesI just got home from work, opened my door and went to close it, it bounced back and did not shut. Tried it again, it would not close. Tried pushing the key fob lock/unlock, did not work. I looked at the lock and its closed, any fix for this issue?
View 5 RepliesThe wife and I bought a 2014 Santa Fe 2.4 FWD back in August and so far we are pretty happy with it. A few issues have come up in the first couple months of ownership.
1) The dreaded squeak from the rear passenger side started a couple months ago. I’m going to try the easy fixes first (adjusting the tailgate stops, etc) then take it to the dealership if that doesn't work. I hope they don’t have to do the spot weld fix but if that’s what it is, oh well.
2) Another issue that just came up as of recently is that it’s leaking coolant out of some strange fitting on the front o
Among other issues that have been happening with our tig, the battery crapped out. Replaced the battery no problem. The drivers side auto up and down stopped working but that was an easy fix.
When the battery died we noticed the chirp wasn'tt happening when you lock the car. Back left door isn't locking or unlocking with either the fob or any buttons on doors. The lock buttons on the affected door either, but the window works fine.
This seems like the battery dying caused it, is there some way to reset it like the auto up?
I'm unable to open my trunk door with the remote, using the key, or with the switch on the drivers side door. I am also pretty sure it is not frozen shut. Will I need to switch out the complete latch assembly or just need to wd-40 something? This is for a 2000 Passat 1.8T Sedan.
View 4 RepliesMy driver side back suicide door won't open. It is the top latch that is not disengaging. I think I heard something loose in that door over the past month. Am I going to have to take off the inside panel to fix it?
View 14 Replies