My W8 has a noise problem that's getting worse. I've had the tires replaced and had the dealer look at it. My dealer thought the rear rims were bent, but the noise definitely comes from the front end - I'm pretty sure the passenger side. What this could be? I'm thinking bearings but when I jacked the car up there was no play in either front wheel. Had the tires rotated and the noise didn't move.
View 5 RepliesFeel there is excessive road noise on the highway? (not wind noise)
Seems as though it can be worse depending on the surface. Comparing the B7 to the wife's Q5 is painful. Heck, even my MKVI GTI was silent compared to this. What do you all is a good fix?
Tires? If so, what would be a good upgrade? The P Zero Neros on the GTI seemed pretty good. I'm new to car tires. Long time Jeeper. Dynamite under all carpet?
2007 3.6 Wagon Sport. My wife has the 18" Samarklan wheels and automatic transmission. We have complained to the dealer since the beginning with only the "you need new tires" response. Well we got new tires last year and the noise was the same. I've had 18" on my old '00 S4 and current '00 A8 with nothing near this amount of noise.
The sound is most like a groan and doesn't seem to be coming from the engine. It's seem most noticeable at lower speeds coming/coasting to a stop, but does not seem to vary with or without braking. It doesn't seem to vary based on turning either.
I don't ride in her car much, but am always shocked how loud it is when I do, as it's so dramatically louder. Also the HVAC 'percolates' constantly which is generally only noticeable at idle. This is a small, secondary concern. I everyone's Passat really this loud?
First off let me say I love my TDi for everything I bought it for...fuel economy, space, ride comfort.
I've noticed the wind noise before but had never taken a drive more than 30 minutes.I just took my first 300 mile road trip and REALLY noticed the EXCESSIVE wind noise.
I traded a 2010 GTI and its weather stripping was more full and produced a much better closed door seal and I never once had problems with wind noise in the 2 years that I owned.
About 5K miles after putting on 18x8.5 rims with 235-40 tires noted bad reverberating droning tire noise and noticed stairstep pattern of excessive wear on inside tread blocks, equal on all 4 wheels. Is this just from going from OEM ET47 to ET35? Is camber adjustment indicated and is camber adjustable also on the rear wheels? (Of course, noise and reverberation gone when OEM wheels put back on)
View 5 RepliesReplacing front wheel bearings on my 99 Passat? There is a gentle 'wahwahwah' grumble at speeds over 40mph. The car has done 130,000 miles and is otherwise in nice condition.
View 3 RepliesAfter my Chevy Prizm took its rightful place at the junkyard two months ago (transmission failure on a car with a bad engine and suspension problems is, and should be, fatal), I got a 2008 Honda Civic to replace it. I had it checked out before buying by my mechanic, and I've driven it a few thousand miles without many issues. It had just under 42K on it when I bought it (former lease bought at new car dealer sale by the local place I bought it from), has just over 46K now, and has new Bridgestone tires on it that my mechanic says are worth $700-800. (I don't know exactly what kind they are, which is why I include that bit of pricing info.)
Last week I noticed that a sound I'd been hearing intermittently (to the point where I wondered if I was imagining it) became steady and consistent at 60mph. It's a "hooooooooo" sound, very resonant, and it's driving me crazy. It's gotten louder and louder, and it's now happening around 30 mph and above. It's been consistent since last Friday and getting worse every day.
Underneath that sound is the soft drone of what I assume is a wheel bearing going bad, which is still intermittent and has only started in the last few days. This is what causes me to believe what my mechanic said yesterday, which is that one of the front wheel bearings needs replacing. He also said I could wait until the sound "gets louder" before replacing the bearing -- I assume he means only the droning sound, not the resonant hooting that I hear every time I get onto a main road now. Because I believe the resonant sound COULD get louder, but I don't see how a person could keep driving under those conditions without actually going insane.
I scheduled the car to go in tomorrow to have that bearing fixed (for between $300-500, he said, which seems really pricey to me). But I'd like to know whether this is likely to solve the resonant "hoooooo" sound as well as the "wow wow wow" sounds that I associate specifically with a bad wheel bearing. My mechanics checked the suspension and rotated the tires yesterday while doing an oil change, too, and said everything looks tight and good, and the tire rotation had no effect on the sound I'm hearing, which is strongest from the driver's side front and is, again, louder every day.
(I know Civics aren't supposed to be great on road noise, but the fact that this has clearly gotten measurably worse over only a few days makes me feel its definitely mechanical and not just the usual ambient highway noise.)
As the weather got hotter, I have started to drive with my windows half-down when driving through city for short distances, otherwise I use AC. What I noticed about one month ago was the noise coming from the wheels when going over bumps. It is really annoying and sounds like when you shake metal balls in a pocket.
Firstly I thought that it was coming from the brake calipers, so I replaced all the shims (actually, I have replaced rotors and pads also as they were pretty rusty and I got a good price on them). However, the noise is still there. Yesterday I got my tires replaced for the summer ones and as I was checking afterwards if the bolts are tightened correctly, I noticed that if I shake the wheel (really hard) then I can replicate the noise. To have it summarized.
What I have tried already: Replaced rotors, pads and shims on every wheel and ensured that all of the bolts are tightened correctly. And I have also googled about this problem but every finding was about the shims not fitted correctly.
What are the symptoms: Strange metallic noise coming from the wheel (every) when going over road surfaces that are not perfectly flat and with windows down (when they are all up, I cannot hear anything). I can replicate the noise if I shake the wheel (with car on the ground).
I have taken video of the noise and hope you car hear it, but I think it is pretty noticeable. It sounds like the bolts are really loose but I have ensured 10 times that they are tightened and also as I wrote previously the noise is coming from every wheel. You cannot see it on the video but I'm filming with one hand and shaking the wheel with another (pretty hard), that's why the whole video is shaking.
I just got a new Sonata and I find the car has a noise like bad wheel bearings in front, it sounds like driving on really rough pavement.. I have changed the tires and still get this..
View 1 RepliesI drive a 2006 Volvo V50 with 65k. Recently the car started making a noise and the dealership told me that I need new front wheel hubs because my bearings are shot. The car has always been well within the weight limit, has never been through deep water (we do line in the pac NW so there is a decent amount of rain), and has had complete service at all of the maintenance times. I think that under 125k bearings should not be giving out and that volvo should replace the bearings for free - the mechanic is telling me that there is no set time for bearings to wear out - it can happen at literally any time/mileage/age and it would not be the company's fault. Who is correct?
View 10 RepliesOur 2011 w/140,000 miles has a variable front end noise that I suspect from past experience with other vehicles is a bad wheel bearing. I've seen posts of the procedure for replacing the Gen 2 bearings that requires the hub and bearing be pressed out and new bearing back in which would limit the DIY'er, but looking at the replacement parts diagram for the Gen 3, it appears that the hub and bearing unit is bolted in with 4 bolts and may not need a hydraulic press to install.
View 4 RepliesFront wheel bearings making noise. Can I buy replacement bearings/races/seals, or must i buy a whole new hub front assembly?
View 3 RepliesMy 2008 Passat vibrates excessively anytime I am accelerating once above 40mph. Done balancing severally and bought new tyres yet problem is not abating. What else can I do?
View 4 RepliesI just heard a dyno operator explain a dip in torque from 1500-2500 rpm as being that the auto box disengages due to excessive torque to prevent damage.
this is for a chipped passat B6 1.8TSI (I know guys in the US dont have this engine) but hardware nonetheless should be similar is there such a feature for the B6 autobox to disengage or pull power in order to protect itseld due to excessive torque?
2ndly, does a dyno even read accurately WOT from 1500-2500 rpm?
I have been getting increased noise coming from the back of my car for the past month. So I jacked up the car and spun the tires and heard grinding noises in the rear right. I have a 2012 ToyotaPrius plug-in with 33,000 miles. When driving the car around 40 miles an hour there would be a howling sound coming from the back of the car regardless of the type of pavement I was driving on.
So I took it to the dealer today and they had it up on the rack in about an hour later they came to me and said it needed new tires and it would be about $700 and that this was likely causing the noise. I said that there was no way that it was the tires so I went and showed the mechanic how old the sound was coming out of the back right wheel. He listened with his stethoscope on the wheel bearings and said that he did hear some noise in there but still thought it was the tires.
I have an '06 F-250 that's making a quiet grinding/humming noise from what sounds like the front end. It doesn't seem to be coming from any side in particular, just an omnipresent noise whenever the truck is moving. It's constant with speed, and most noticable between 30-60 KPH.
Truck has about 268,000 KM on it right now, and has been worked pretty hard for whatever that's worth as well.
Last week when we were in the single digits outside my 3.6 SE took about 15-20 sec of cranking to start (garage kept). Then the check engine light came on (2nd time in 10 months). I drive a lot (80 miles a day), and have put 19,900 miles on since I purchased it in March of 2012. The light turned off after three cycles, but I just so happen to have my 20,000 mile service scheduled so I took the car in. The hard start still is happening every few start ups.
The dealer told me the hard start issues I have been experiencing was due to excessive carbon build up on the valves. The dealer said they haven't seen many "high mileage" 2012 3.6 come through, so they could not tell me if this is common.
I use Shell 93 octane for every fill up. Is there something else I should be doing to prevent this carbon build up? Any others seen this with their higher mileage 2012 3.6? BTW they also had to replace the right rear control arm due to one of the bushings being worn out!
Getting stupid amount of engine heat on legs? I feel like I'm straddling the manifold sometimes.
Only thing I can think of is that I've got a large hole in a grommet or something?
I have continous white noise when driving with the sunroof closed but the sunshade open. As soon as I close the sunshade the noise goes away. This noise is prevalent at 50 km/h and up.
Dealer said there were no leaks, and they claim to not hear the noise. I drove another MK6 today with my salesman and there was no noise difference between having the sunshade open or closed, even at 100 km/h.
I have a 2002 Prius. It hasn't been well maintained over the last year and a half, and I had been hearing more and more ambient noise while driving. I thought it was because the tires were wearing out. Well, in the last month I finally got caught up on maintenance (oil change, some new filters, etc.) and got a new set of tires; however, the excessive noise is still there. It becomes noticeable at about 25 mph, and gets louder and higher in pitch as speed increases; there's a noticeable vibration as well from about 45-50 mph.
I don't think it's engine related; the noise happens whether I'm accelerating or just coasting.
Experiencing excess wind noise at 60 mph and faster? You would think a vehicle that has a low drag coefficient would not have wind noise issues.
View 9 Replies