Strangest thing! Yesterday on my way home was coming up to a stop on this back county hwy. My car started to buck or hesitate of some kind as i stopped. It was bucking while I sat at the stop sign. Then I released the brake a little to roll forward, and it stopped.
View 2 RepliesI just purchased a 2008 passat, 2.0T 6spd manual last night and I noticed today, when sitting at a stop sign it has slight idle issues, (goes up about 200-400rpms) then back down to normal idle. Doesn't seem to be causing any issues, its just pretty annoying, and everyone next to me thinks I'm trying to race them.
View 24 RepliesMy car sometimes at a stop sign may randomly shut off. I try to turn the car back on and it cranks longer than usual. Then it will turn on and my epc light will turn on. And my rpms would stay at about 10k to 11k. What's going on here? Only CEL light I have on is maf sensor and i have a bad abs module.
View 10 RepliesI have a 2007 Passat 2.0T wagon. I got gas this am, and on my 30 minute drive to work all was fine until I got into traffic or came to a stop sign. While at the stop sign the car started to lurch forward or even seemed to be up and down. The idle was fine, completely constant. It was like the car was hopping or wanting to push forward. It did not happen in reverse or neutral and the car was fine while driving. What this could be?
View 4 RepliesSo this morning on my way to work its pouring. Drive 30 min and while slowing down at the last stop sign the car stalls. Car wont start anymore. Not even trying to turnover. Damn TB must have snapped.
So I ended up pushing the car into my works parking lot. Luckily rain stopped by lunch time. I popped open the driver side TB cover just enough to see if the belt. The belt did not seem to have snapped. I was able to push down on it with some force. There was definitely tension on it. So I ask my buddy to try and start it. I could see the belt turning. Tried a second time to start and this time I would even hear the starter. all it would do is a clicking sound.
Is it possible the belt is really broken? I'm now thinking it might have jumped a tooth or something and now all my valves are bent. Car has 140k km. Previous owner said it was changed but could not provide any proof. I guess my question: is there anything else that would cause TB Failure symptoms. I mean the car stalled out. How could it not be the TB...
I have gotten a STOP Brake Fault Service Manual warning sign on my car for a couple days and now my car wont start... no ABS light is on...
View 5 RepliesI have a 04 lariat f150. Problem is every time I stop at a light or stop sign I hear and feel a bump. Coming from the rear I guess . Had my truck aligned asked the alignment person about the situation he said ford just do that. True or false ...
View 2 RepliesLast week I was changing the oil on my wife's 2004 Camry (130 000 kms). I noticed quite a LOT of corrosion around the positive and negative battery terminals.. so I decided to clean them.
I removed the negative without any problems but I could not get the positive off. I decided to use a hammer to move the connector back and forth. I was surprised with how much force I had to use to break the connector free.
Once I replaced the oil I tried to start the car but it would not start. I check the voltage and I was down to 10 volts. Obviously I had damaged the battery in getting the positive terminal off. A quick ride to the auto parts store and I had a new battery.
I installed the battery and took the car out for a spin. The car drives normally but it will NOT idle after it has been warmed up. If I come to a stop sign, the car will idle low and stall.
I have already verified that the battery is at full charge and the battery is being charged when the engine is running. No 'Check Engine' light has come on.
I just bought a 2000 Toyota Camry 4 cylinder with 150K miles. It drove great for a week. Now it wants to cut off when I'm at a stoplight or stop sign. When I press the gas there is no acceleration and very sluggish. This is when it wants to cut off and does about half the time. At normal driving speeds it drives great. The Check engine light also came on. Advance Auto Parts store read the codes and it's P440, p441, p446 and P106. All have to do with evaporative emission control.
View 3 RepliesBraking at a stoplight tonight, I had the VSC and ABS light come on. I pulled over to a parking lot and shut the car down. I couldn't tell any issues with the brakes at all in the short few hundred feet I drove to pull off. Turned it back on and the lights were no longer on.
View 8 RepliesSo on my way home today from work I came to a stop sign and noticed my car (2001 Hyundai Accent, 1.6L Automatic) didn't downshift while coming to the stop. So I stopped and hit the gas, and the car didn't move, it only revved. So I put it in park and it banged into park, then I put it in drive and it banged into drive. Then while driving, it will only shift when you let off the gas and like 5 seconds later after you let off the gas it shifts really really hard into third I believe. And in addition, there is no reverse now! I put it in reverse and nothing, even when I hit the gas it goes nowhere.
View 5 Replies2008 golf city... So I bought this car about 2 years ago and the last couple weeks its had trouble starting and will sometimes stall out when your about to accelerate (from a stop sign) the mechanic I go to replaced the a couple relays under the drivers side dash, however I it hasn't made it better it actually made it worse as now it won't start at all the last 2 days. It rolls over and tries to start just doesn't. Its my only car and I already missed a week of work for it ( I commute ) I need it fixed. I believe the relays where the EMC is what he said number 249 I believe.
View 3 RepliesWe bought the car this past summer. Notice steering wheel vibration during braking. Figured rotors were warped. Which they were. Replaced all 4 rotors and pads. Now I notice that when I brake at a stop light or sign, it feels like the brakes are catching and slipping. Jerking movement. Like you are pumping the brakes slightly. Brake pedal seems slightly mushy too. Maybe air in brake lines?
View 8 RepliesWe have a 2012 Santa Fe Limited V6 AWD. Currently it has 17,400 miles on it. It's my wife's daily driver and has been a great vehicle. Last week while she was coming out of Target and slowing down for a stop sign she felt a "shudder" as it downshifted from 2nd to 1st. Then as she was coming up to a stop light it did it again. So, she came home and told me about it.
On the highway coming home she said it was perfectly fine but stopping at the stop sign on the off ramp it did the shudder. And so I took it out for a test drive to go get the mail. I noticed that it would shudder on the 3-2 and 2-1 downshifts. On the up-shifts it was perfectly fine. Then, I noticed as I was rolling forward at about 1-2 mph waiting for someone to cross the street the car was rolling like one of it's wheels or axles was bent. Any faster than that and you can't feel it and again at highway speeds you can't feel it at all. It's glass smooth.
Soooo, we bring it in to the dealer and they say we bent the front drivers side axle shaft. WHAT!? How in the world would we have bent that? They said we probably hit a big pot hole but it's under warranty and that they will have to order the part and to bring it back the next week. We drive it for another week and the shudder is getting worse and at this point I'm pretty sure the trans is toast. But still, on the highway it's perfectly fine.
We bring it back in to have the axle shaft replaced and they say it will be about 2 hours. And so we go on our merry way trying to kill some time. About 1.5 hours later we get a call asking us to come back in because they need to get us a loaner.
Apparently as the tech was trying to spin the drive-shaft to line up the splines in the trans with the axle shaft he couldn't turn the drive shaft even though it was in neutral. There was a spot in the rotation of the transmission and drive-shaft where it would spin freely like it should and then it would hit that spot and was almost "un-turnable". They think that is what bent the axle shaft.
So, they are going to tear apart the transmission and transfer case to find out what the problem is but most likely going to have to end up replacing one of them anyway.
I have noticed, in my 2012 Elantra with 32,000 miles on it, that my car is shaking at idle. I'll be at a red light or stop sign and the vibration is SUPER annoying. I have had it tested at a Hyundai Dealership. They couldn't "replicate the problem" and nothing it wrong with my car.
I may be trading this car in for the Veloster Turbo. I'm tired of how slow this car is. I know I sacrificed speed for gas mileage, but I have a question, does the Veloster have this problem as well?
My oil pressure warning light has come on numerous times, only happened when I'm in a drive thru or at a stop sign, I switched from VW castrol oil to royal purple. The oil pressure warning comes on flashes 3 times and says check owners Manual. So I did and it says not to idle or run the car... The oil is fine. If this serious or a flaw in the electrical? It still drives the same and nothing has changed.
View 5 RepliesWill I wear out the transmission using the engine brake to slow down faster when coming to a stop at a stop sign or light, then shifting back into D when taking off? Should I just always leave it in D unless I am driving down a steep hill?
View 12 RepliesI have a 2009 town and country with 50k miles on it. It drove just fine, until I brought it to the dealer for the R03 recall on Friday, June 12th, 2015. Right after that, the engine sometimes shut off at the stop sign or red lights. Also, when I back from the parking, the car won't move forward after I shift from R to D - but it can still go backwards. It doesn't always act like that.
So I brought it back to the dealer. Their technician said it is unrelated to the recall, and after a week, they told me they couldn't find the exact reason, butsuggested me to replace the spark plugs and wires ($559.xx). Then we can start from there, which means I may need to replace other parts later on - as they weren't sure the exact cause.I don't like the idea of the first step - so I drove it home.
Supposedly, the R03 recall is to prevent the car from sudden shut-off. Is that just coincidence my car started to shut off right after the recall?
I also noticed that it is more likely to die if I brake harder - not 100% sure about this, maybe just illusion.
Did a test drive this morning(6/24). Shut off once out of 10 or so stop-signs. Did notice the RPM went down and up a little (-just a little) at idle.
I came to a stop at a stop sign and the car just quit. Its a 02 12v vr6 5 speed...
So I tried restarting it and it will only crank...
I've read the throttle lag posts with interest. Ours only lags when performing a "California" stop where you go from the brake to the gas and look for an instant pick up. Seem to have about a second of delay before anything happens. Of course this causes all sorts of unnecessary lurching and I don't like it. Does everyone else experience this as part of their throttle lag problem?
2004 V8 Touareg
2003 GTi 1.8t
I'm trying to diagnose the problem with my friend's 1994 crown Vic police interceptor. It dies at stop signs and then won't start back up till after waiting like 5-10 minutes. I asked him if his check engine light is on. He said yes, so I looked up how to retrieve the codes with a jumper wire as I have on older vehicles of my own. I found that information but can't locate the terminal. He said other symptoms are poor fuel economy and sluggish performance. My friend is so busy and pinched for cash he's been driving like this for over a year.
View 1 Replies