Passat (B5) :: 2004 - Hood Won't Release
Nov 10, 2012
My problem is that I get a pretty good pop from the main release inside the car. The hood doesn't come up too much, and the secondary release tab does not pop out from under the hood. I've managed to get the grille off. The tab will move back and forth a little, but then stops. Even yanking on it will not cause it to release the hood the rest of the way.
A couple of the fixes out there are spraying some lube in there (done) and popping the latch with a screwdriver (can't see how to do this on my car). There is even one for drilling a hole to get access, but I think this might be a B5 thing?
View 4 Replies
Advertisement
How to remove hood release and plastic trim from driver side covering wires going along driver door, left rear door and to the trunk? I am trying to install subwoofer and amplifier in the trunk need to fish wire through the car from battery to a trunk, and got staked with hood release (opener), i can't remove it and piece of plastic where you put your feet holding together. I don't want to brake anything.
View 2 Replies
When I pull the release handle there is no resistance. I suspect the release cable is broken. How to release the locked hood?
View 1 Replies
How to manage to open the hood when it wont "pop" from inside the cabin. There is not enough tension on the cable and seems as though either the cable has been stretched or either came off or broke its retainer under the hood... I noticed "TSB"s but to be honest I dont know what these really are or how they matter...
View 3 Replies
The hood release strap broke on my 2003 VW Passat. It fully came out from under the hood while the hood was closed. I had the car at a shop the day before, picked-up the car at night and found the part dangling above the grill the next morning (the work included work under the hood so they were the last ones to open the hood). Of course the shop knows nothing about it and said they've never heard of this happening before. The part broke at the end under the hood that connects to the release point and cannot be repaired (two eyelets broke on this plastic part). I found the part can be bought on-line for about $11 plus shipping. Obviously the first step is I have to somehow get a tool under the hood to release the hood where the strap made the release in the past. The question is how do I do that?
View 4 Replies
I noticed my hood latch release getting a little stiffer over some time to the point that my hood latch cable stretched out and didn't work. I fixed it by tying a knot in the cable to shorten the length and now it works fine. HOWEVER, it is still getting stiffer. I unhooked the 2 cable peices where they connect under the hood on the driver side to see if they are sticking, they both are smooth. I also latch the release mechanism (without closing the hood) and activated it easily. BUT still when I use it on the hood, it is very stiff.
View 1 Replies
went out after checking out the cheap mod thread (to see what I can mess with), went to pop the hood and nothing happened. I've looked all over vortex and I cant find anything.
View 3 Replies
I picked up a new CSG GTI, 6speed with Xenon and Bluetooth on Thursday. Yesterday evening when I got home from work I opened the hood to make sure everything was cool I guess. Then this morning I was going to open it again, and the release inside the car is loose, like it's hardly attached to anything.
MKVI? I know it's probably a cable issue, but it sucks to have to drive back 50 miles to the dealer, 2 days after buying it, because the hood won't open.
Pic: ........
View 2 Replies
So in order to get my hood to open, I have to pull the hood release lever in the cab, go pull up on the hood itself, then pull the release lever again, and pull on the hood to get it to finally pop. Is this a cable perhaps going bad? Or another issue I need to fix?
View 14 Replies
I've been driving a 2009 Hyundai Sonata for about 9 months now and it recently (2 weeks ish) started to not shut its hood. I haven't gotten it officially checked out yet as I'm low in funds and don't want to shell out money where I don't have to. I know it's dangerous to drive around with my car hood open (like an inch which is noticeable). I would shut it before I start driving and when I reach my destination it would be up again. Someone (a random guy who pulled up next to me at a red light and told me he could give me a quote for my hood... and the dent on the side of my passenger door) told me it may be due to a loose hood release handle on the driver side. There was no give when I tried the handle (is this called the latch?) and when this someone tried to loosen the rust on the hood lock itself (is this the latch idk these car terms), it still wouldn't close. It would click but pop right up. It keeps clicking when I close it but doesn't fully close because I could lift it up about an inch and it'd stay that way. He said it may be due to a cable issue with the release handle.
View 2 Replies
My battery went flat and to compound my misery, when I went to open the hood, the cable was snapped. How I can open the hood without using the release cable ? I'd rather not have to pay for it to be taken to the mechanic and then also pay to have the battery changed !
View 3 Replies
My hood has ceased to pop open when I pull the latch from the interior release. I removed the panel to see if the cable came undone from the release lever but it is still intact. From what I can tell, the cable seems to be snapped in the middle. I brought the car to 2 different mechanics, both said they would have to do damage to get under the hood. But I've read online and it seems other people are able to do it.
View 5 Replies
I have been having trouble trying to release the lever under the hood on my 2009 Jetta. the interior lever seems to be working but when I attempt to depress the hood lever it won't budge! I like to check my oil on a regular basis and I have never had this challenge before. I'm also worried that if I am able to release it that I will not be able to secure it afterwards, rendering my vehicle inoperable. I am strongly considering just taking it for an oil change and "springing" the dilemma on the garage.
View 3 Replies
I have a 2006 Ford F-150, and when I pull the hood release, the hood won't open unless I'm holding on to the hood release handle while pulling up on the hood. I've been trying to figure out how to adjust it but I can't find any information on it. The cable isn't broken, as I can see the cable move, it just doesn't seem to move enough to open the hood release. How I can fix/adjust it so it will work? Do I need to adjust it at the handle, or at the actual release under the hood?
View 12 Replies
I have searched and tried everything that was suggested to open the hood on my 2000 and nothing works. When looking form the front you can see the hood release operate, but nothing happens. What part of the release do I need to operate to get the hood to open?
View 5 Replies
There's this 99 b5 sedan at my local junkyard with wheel locks on and I need to get into the trunk to see if the key is in it. all four doors are unlocked, no key, no battery.
is there a way to get into the trunk from the rear seat and trip a manual trunk release?
View 9 Replies
Is there anyway to disable this in vag-com? I am getting annoyed, i have to move the car a few metres every night, and i cant move it without putting my seatbelt on, which is a good idea, but its silly. Can turn it off?
View 5 Replies
OK, on my 2008 B6 wagon when the park brake is on, you can release it by tapping on the gas pedal (door closed, belt fastened and engine running). On my 2007 B6 wagon you have to additionally have the Auto Hold on. I dislike Auto Hold and get tired of poking the button all the time. Is there a way to upgrade the 2007, so you don't have to use the Auto Hold? Maybe change the EPB module or change it with VCDS?
View 9 Replies
My friend has a 2001 passat and the release button for his gas flap(door) doesn't work. He looked through the trunk to see if there is an emergency cable or a possibility to get it open some other way, but no luck. How he could open it if the button doesn't work??
View 1 Replies
I have a 2000 v6 glx passat. CCM recently got fried, brought to dealer and got replaced, they fixed all the leaks. I go to open with trunk with the remote and it doesn't work, so i go to the cabin and use the switch located at the bottom of the drivers door and that doesn't work either. I hear a clicking in the fuse box so i looked around and fuse 38 clicks when ever i hit the trunk release button, fuse is fine, replaced with another one too, trunk opens with key manually. when fuse 38 is removed, trunk still doesn't open remotely or with button but the clicking stops.
View 3 Replies
I have an 05 Passat and I'm trying to remove the bumper cover so I can get to the crank bolt. I have all the bolts out but cannot get the three clips removed from where the grill attaches to the bumper. I can see them with a flashlight but can't get them released with a screwdrive.
It's not covered in my manual. How do I get them released?
View 7 Replies
