Passat (B5) :: 2003 W8 - Stop Oil Pressure / Airbag Fault
Jan 2, 2011
This morning when I tried to start my passat I got a number of errors. The car was running fine last night. I had to use all of my keys I had to get it started. At first there was a Air Bag Fault message, and the car would turn over but it wouldn't let itself run. After changing keys I got it started, however none of the gears show up on the LCD. At that time I got the stop low oil pressure light.
When I tried to start the car a third time it told me the car was immobilized. Since then I managed to get the car in the driveway, and now it starts up every time, not like it is immobilized, but I still get the air bag fault and the low oil pressure. Further the RPM's go up when the care starts but then the gauge bounces from 0 to around 1,000 when it is started, and the temp gauge is non functional. The engine itself holds a normal even idle.
View 3 Replies
Advertisement
So i just bought my 2003 passat wagone gls 1.8tand it has this "STOP" "BRAKE FAULT" coming up on the dash display and the ABS light and traction control light is on steady and the BRAKE light is flashing....a code was ran for the speed sensor and that was replaced but the light is still on....what could it be?????
View 10 Replies
Well like I said, I have an airbag fault light. I recently installed a sound system and ever since I unplugged the "Passenger air bag light" indicator module from the dash trim piece the air bag light has been on. When a passenger is in my car the air bag does indeed activate and deactive when they get out.
My question, why is my air bag light on? Did unplugging the module from the dash trim peice really cause that? I don't really want to take it to my local dealership and get charged diag time.
View 7 Replies
so today i removed the radio bezel from my 06 and i left the key on like an idiot and now my airbag fault light is on I reconnected the bezel i make sure that the plug was on and still airbag fault light is on.
View 6 Replies
I have a 2002 Passat wagon glx 4motion & I was driving the other day when out of no where my airbag light came on ... What to do??
View 1 Replies
Today, I got a message on the cluster that said Airbag Fault and then the airbag light has now shown up. Never seen it before...Why I might be now?
View 2 Replies
Alright just had this light pop up on my 01 passat,
View 1 Replies
Starting a couple of days ago, I am getting the airbag fault light on the dashboard. Can't seem to explain why. I have never changed any wiring on the car, nor installed aftermarket electronics. I have the car for about a year now. At the time when the light came on, the weather outside was very cold.
View 5 Replies
I recently sent for a reset my airbag module, yes my car was in a collision, I replaced passenger airbag(only 1 airbag deployed). And reconnected the module. Using the VAG COM, I scanned the airbag module, shows no fault codes, but i still have a light.. now I'm thinking seatbelts and sensors maybe the problem. Where the sensors for a 2005 passat passenger dash airbag are located.
View 2 Replies
About 8 to 10 minutes into the drive and....beeeep, I have an "Airbag Fault" on the dash. Just showed up out of the blue.
View 1 Replies
I got a 2006 2.0t komfort. I started the car this morning and got an airbag fault show up on the dash and now the air bag light is on. What this is and the possible fix?
View 11 Replies
My airbag light won't go away, and everytime i pass 25mph my dash says airbag fault. Is this another sensor that went out?
View 4 Replies
I removed my front seats to steam clean the carpets. After replacement, I get a "Air Bag Fault" warning on the dash. Is that something I can reset?
2000 Passat Wagon V6, 5sp
View 5 Replies
Well, I recently had the "Airbag Fault" error message (along with the wonderful amber airbag light) both appear on my dash, and oddly enough, I haven't hit anything or bumped anything or done anything that could cause this error. I drive a 2001 VW 1.8T and she only has 48,000 miles on her.
View 1 Replies
After installing the new head unit in my 06 Passat 2.0T, the "Airbag Fault" error appears on the MFD upon startup and the airbag light on the gauge stays on.
View 5 Replies
Why my low pressure light is on and why my mfd is telling me I have an airbag fault? Where would I want to start diagnosing this problem? I ran power and ground wire with no sensor issues, but once the remote and RCA wires were connected I got the sensor issue.
View 10 Replies
My 2003 Tundra is showing a fault light for the SRS. It only shows when the air temperature is high. After running the A/C for the drive home, I can turn off the truck and restart it and the fault light doesn't show. That seems to indicate the fault is related to cabin temperature. What is causing the fault?
View 18 Replies
I read that fault from a 2003 Camry 2AZ-FE.
Under highway conditions, the owner reported a flickering oil pressure light. Oil looks ok and the level is good.
Are the oil pumps prone to failure, or is there a pressure relief valve that gets stuck open?
I will start by checking the operating oil pressure, but what should I look for on the oil pump?
I will also take off the valve cover and check for garbage or sludge. This poor thing has not been maintained well at all.
View 11 Replies
Stop immediately brake failure fault on Passat? Mine is a w8 4 motion and is riding a wrecker to the dealer.. We'll see what he says...
View 4 Replies
My brakes are working fine very smooth full of fluid. But for some reason sometimes when i take a hard right turn the stop brake fault pops up on my info screen. I live in nh and it is very cold/ ice too.
View 5 Replies
I have a 2000 passat 1.8T and the ABS light and brake light comes on and shortly after the "stop, break fault "message shows up. The warning does not come on every time I drive the car only sometimes. Brake fluid has been topped off and everything else seems fine. Is it a bad sensor somewhere? Something else maybe?
My check engine light is also on and the code is p0118. I replaced the engine coolant temperature sensor but I still get the code. Was there some secret way to replace it that I didn't know about? Something else I should check?
View 6 Replies
