Lately my '03 1.8t with 90k has taken to long cranking before firing.Once it fires, it runs rough for about two seconds and then smooth as usual. Thought it might be Fuel pump relay but I'd think that'd show a fault light. Same with Fuel pump?No faults showing up. Plugs changed 9k ago. Only run Premium Shell.
View 1 RepliesBackground on the vehicle, Last week installed Swamps 200cc/30% injectors with a 38r. Had swamps reburn my chip for the new upgrades.
But heres the problem i noticed starting the truck was a little harder ( longer cranking ) till it would start never thought of anything since i read air gets in and can cause it but then yesterday and today its taken 30 minutes to start the truck since i have to do a trial and error.
The truck just seems like the batteries are being drained or something along those lines. i also noticed my gauges keep resetting back to blue( default color). Today I plugged a battery charger up all good voltage i charged them so both read 14v and still no start. So a couple of attempts at starting with chip in and ICP on nothing
I unhook the chip and ICP get a half start then eventually it starts. After then i can hook it all back up and it starts good for the rest of the day but for what ever reason after it sits all night it doesn't want to start up right away. I'd like to figure it out today since id rather not wake up at 4am and attempt to do this all before work each day.
I noticed that my gauges would reset to the default color after each turn off. So i unscrewed my ECU and then redid that to make sure its tight. along with making sure the chip is seated properly. after that it stopped resting my gauges. Whether that's the issue or not i cant say but ive been checking my HPOP oil level since i stopped driving it around 1400. and hasn't changed oil levels are good. I plan on starting it before I go to bed around 2200-2300 just to check and see what happens.
My wife has been telling me our '01 E-350 (Econoline) with 7.3 is taking several attempts to start in the mornings, like it's not even trying to fire. It will crank like wild but no fire and then it will fire usually and sometimes run a little rough but no always.
Tonight she called me from across town and it won't start at all, cranks like wild but won't start, chug or anything.
The WTS light is working fine, the truck runs great and idles smooth all other times, just been giving grief when starting in the mornings (warm outside 70 degree plus ambient temp). I haven't had the truck do it to me but she has explained it well enough.
I do get a SES light for overboost when I run it hard (PHP tuned) but it always goes away and hasn't caused any issues. Could this be the ICP acting like this? If so, is it true that I can just unplug it and the truck will start by using default pressure?
I have a 2000 Hyundai Accent hatchback with 98k miles. About a month ago we were headed out of town and got gas about a mile away from the house. After filling up, the car wouldn't start. It would crank but not fire. Tried for about 15mins to no avail. Had it towed to local mechanic and it started right away. They kept it for the weekend and said they had no problems starting it, so without experiencing the problem they said they would just be throwing parts at it.
About 2 weeks after my wife drove to store and when she went to leave and same experience, but this time it started after trying for a couple of mins. Then just this Tuesday it wouldn't start in the morning. When it just cranks but not fire it shows a pending P0335 (crankshaft position sensor). So I ordered the part (won't arrive til Friday). When I got home I tried to start it as well to no avail; tried again Wednesday morning and evening, nothing. Then this morning (Thursday) it starts right up. Once its started it runs great. After recurrence of no start 2 weeks ago, I replaced spark plugs and spark plug wires.
I have a 2003 Saturn Ion-3 that I bought a few months ago. It has 157,000 mile and runs great when it will start. Here is the issue: after the car has sat for several hours it seems to flood and starts hard. I end up putting the accelerator to the floor and this seems to work. I have to crank the engine repeatedly and when it catches I hold it to the floor until the engine clears (lots of chugging and white/blue smoke until it clears) and then runs just fine. If the car sits for a short period, it starts ok. The longer it sits, the harder it is to start (i.e overnight or a whole shift at work).
If the car sits for several days it starts just fine. It acts as if it floods while it sits so I changed the Coolant Temp Sensor, still acted up. I then checked the fuel pressure at the schrader valve (55 psi) and noticed that it lost pressure as it sat. I assumed that the injectors were leaking and had them rebuilt (by Mr Injector). The flow bench results did not show and leaking. I reinstalled them along with new spark plugs and the car started up immediately and ran/drove great. This morning was the first morning of sitting all night and it would not start again. It tries to fire but will not catch. I tired to have the CEL code read at autozone but they told me my lighter wasn't working and the couldn't do it (although it runs my GPS just fine).
So I recently bought a Hyundai Elantra Gt 2003 that I totally love. But ever since I bought it, it struggles to turn on. It makes a cranking noise before it turns on, and it takes about 2 to 3 times for it to fully turn on. I changed the crank shaft sensor and the fuel pump. What can it be?
View 1 RepliesOn cold and/or wet days weak engine cranking. After a couple of attempts to start, I only hear a click about the 3rd attempt. If I wait about a minute or two, it still cranks slow but starts. Battery was replaced about 6 months ago. Electrical systems test good indicating no problem with battery, altenator, or starter. I don't seem to have any problem on warm days. My car is 4-cyl with about 85,000 miles and is kept in an unheated garage. Mechanic thinks trouble is likely the starter. Problem is intermittent, I'm not sure replacing the starter will fix the problem.
View 1 RepliesI replaced the battery in my 07 3.6 4mo thinking it was in need due to the cranking time getting longer and longer recently. I began to notice this since the winter. I think it was somewhat there in the summer and fall also but when its super cold or the car has been run in a day or so it seems to be worse. Anyway replaced the battery and it didn't change much at all.
View 16 RepliesWhat a strange problem. EVERY EVERY morning the car starts perfect. Once it is warm some of the time (half) it will give a long crank approx 2.5 seconds before it will start. What a stupid problem! I have replaced:
Spark Plugs (NGK G-power) cheaper than stock, supposed to be better.
timing belt, water pump, idler-just matenence
Cam sensors
crank sensor (on tranny)
I checked the wires and coil by hosing them down while running. Vag-com says the temperature sensor is correct. No trouble codes except Secondary Air... What to do
This is kind of strange, I have a hard start problem, when I crank it the first time, it fires immediately, kind of like a romp, but doesn't start, then when I crank again I get a lot of whitish smoke and no start. I read to try and unplug the ICP and try it. That worked, and I had oil in the connector. I replaced the ICP, but have the same problem. I still have to unplug the ICP for the truck to start. When it does start, it runs great! No injector stiction, no smoke, no rough idle, it runs and sounds great. Why unplugging the ICP is still required to start? (Only after sitting for more than 10-12 hours).
View 9 RepliesI've been working through with hard starting on my 2002 7.3 A while back I took my batteries to Autozone and had them check them. They said they were fine but because of my hard/no start situation cranking on it for a short time (couple of minutes) kills the battery. The transmission shop said that they had to charge it after sitting for a couple of days to get it started. I have a multi-meter and know how to check the voltage. I even have AE and it gives me the voltage. Are there any other tools or procedures to check the health of the batteries?
View 14 RepliesI have a 2001 F-350 7.3L Powerstroke. 48,000 miles. I've been having trouble with cold starts. So far it has always started but is taking a lot of cranking, but it hasn't gotten too cold yet so I'm worried about when it does. I ohmed out the the glow plugs and am getting close to 0 resistance. The GPR has 12.5 volts on the hot side and when the relay is closed 10.5 on the other side. Is that difference in voltage in the GPR enough to screw up the Glow Plugs heating up? If I plug it in at night it starts right up. I'm worried about when I am at work for 16 hours and don't have a place to plug it in this winter. BTW this is my first winter with the truck.
View 14 RepliesHave a 2002 Chrysler 300m with a 3.5 v6eng. Problem is It takes 5 to 10 secs to start my car in the morning, It doesn't start like should, It doesn't show up on the computer. I think they call this long cranking. Had plugs put in at 50,000 miles because of a bad plug, coil is fine and fuel pump is also. Once car starts it smells like gas fumes in the air. At loss as to what the problem is. I don't want to do a lot of lets try this and try that, as this could cost me a lot of money .I have talked to the mechanic and there not sure, along with a dealership. They see dollar signs.
View 2 RepliesMy Corolla sometimes cranks longer than it should when starting. This happens if the car has been sitting for a few hours. Although it doesn't always happen.
It happens when the tank is full and empty. The weather has ranged from 100 down to 60 degrees. The car has 20k miles on it and has had regular dealer servicing. What's going on with it? Otherwise it runs fine
Video: [URL] .....
I recently did the following work:
New Injectors
New T500 Hpop
New IPR
New ICP Sensor
New UVCH/Glowplugs
New starter
Been cranking about 15-30 seconds each time about a dozen times now. I've pulled the icp and the hp crossover and have oil flowing at each.
ICP builds to about 240 psi and at a 98% duty cycle....so I assume there's still some air in the system. I"m not getting any sense that the engine is trying to hit. Do i just keep cranking?
I've got a99 F2 50 super duty with a 2000 2001 motor. I got the truck in the beginning of last winter so this is my first summer with it.
When I first got the truck there are injector issues with the truck. Since I fix the issues there has been little problems out of the truck however it's still suffered misfires when Cold but once up to operating temperature it was fine. Yesterday I had to go with a friend before leaving for the trip I checked the oil it was full and appeared normal the trip was about 150 miles. I came home park the truck after everything was done. This morning I came out started the truck everything acted as it should... truck fired right up everything was great went and dropped off my trailer at the yard come back got fuel when I come back out from paying for the fuel the truck took about 30 seconds to fire up I checked my gauges and torque pro and everything seemed normal. So on my way I went.
I drove about 10 miles on the highway to the place I had to be when I got done doing my business I came back out to start my truck and it did the same thing this time however it took longer to start I managed to drive about a mile down the road when I noticed my old pressure gauge flickering and my Oil pressure light on I immediately shut it down and coasted into O'Reilly's parking lot I check the oil in the truck and it was empty according to the stick I added two whole gallon.... With it filled back up down the road I went. So currently the truck is still suffering from a long hard starts it takes 30 to 45 seconds before it all actually fire up once it fires up everything appears to be fine however the truck is slowly smoking a bluish black color... It's never done this before however I've never had this truck in the middle of summer when it's real hot out I don't think this is normal.
The truck doesn't appear to be down on any power actually it, acts as if it might've picked up of some power it is felt real peppy today compared to other days. Also I might note that about a week or two ago I started smelling diesel like either really rich diesel or raw diesel wasn't too bad but I just got whiffs of it for now and then. Now there is a burn oil smell present from the exhaust. Like I was saying earlier when I first got the truck I had to service the injector O-rings... I was told that the miss firing when cold was caused by the Poppitz sticking. The misfire hasn't been present since it got a little warm outside like I was saying it was only when the vehicle is cold.... Just thought I would mention the injector issue not sure if it's relative or not..... My thoughts are it's back to an injector issue or O-rings or possibly did I wipe the motor when it ran out of oil. I am not aware of where the oil went as there is been no leaks or drips.
I had posted earlier about replacing the harness or at the very least the plug that broke off of the cam shaft sensor on our 98 Subaru Outback. Well, I replaced the plug, and the cam and crank shaft sensors as well and it is still cranking but not firing.
View 7 RepliesI went to start my car this morning it cranks and nothing it is not firing at all, and I do not hear the fuel pump when I open the door like I usually do. It just happened all the sudden. Is there a way to check fuel pressure in these in the W8? Also any known problems to make them do this? So irritating...
View 4 RepliesI have 2002 camry V6, I did a battery replacement few months ago. It gave me hard time to start, cranking but will not ru,. I did clean the throttle body and was fine. I left the car for few days, came back will not start,you hear the starter but no cranking, a neighbor mechanic kept starting and did start. He said it needs tuning. The car has 104 k miles on it.
View 1 Replies2012 2.5 SE Auto 53,000 miles ... A few days ago I started getting very hard downshifts and long upshifts. The downshifts were hard enough that the person at the dealer didn't make it out of the parking lot on the test drive. Most noticeable from 3-2 and 2-1. 1-2 is hard and 2-3, 3-4 and 4-5 take a few seconds to happen. No lights or limp mode.
In recent months I was getting a thump about a second or two after coming to a stop. Enough of a thump that the car would move forward if I didn't have my foot firmly on the brake. They flashed something(the ECU?) claiming there was a TSB for my complaint but it didn't seem to make a difference. I bought the car with 40,000 and the trans never felt right to me. I had them change the fluid just before 50,000 so they couldn't deny a claimed based on failure to maintain.
I've had an intermittent problem on my DSG GTI. It will crank about 5 - 10 seconds before it turns over. It doesn't happen all the time. I've also noticed it stalling out after start up occasionally.
After several trips to my lame dealer they can't find anything wrong or duplicate the problem.