I am trying to replace the rear light bulb (top of two) on the passenger side. It doesn't illuminate when I press the brake. What kind of light bulb does it take?? There is a removable compartment but I am having a hard time removing the harness where the bulbs are located . I see two clips but I still can not pull it out to access the defective bulb.
View 1 RepliesI have 04 Passat and my passenger side fog light bulb keeps blowing up I had to replace it 4 times already. Same thing happened when I upgraded to PIAA H3 yellow bulbs as well. I checked all connections, wiring and everything looks ok.
View 8 RepliesI found out today that my left rear brake light bulb is out. How do I replace it? And where do I buy the light bulb? The manual doesn't say the model # and instructions.
I drive a VW Passat 1999 1.8 T
Looking for a diagram of how the rear bulb set should be filled on a 98 Passat Estate. ie: with what bulb types go where. etc.
I have big problems with my brake lights not working when the lights are turned on, then when I change bulbs about, they work but the rear lights do not come on etc, or one side does. All bulbs work, but not as they should together. I know I have a right mess of bulbs in the wrong place. The car is just new to me so trying to sort. I also have one empty bulb set on the outer side of each bulb holder unit and so wonder what this is for and if it is used.
Left side rear bulb unit on 98 passat estate...
I have a 2009 Camry and both brake lights don't illuminate when I press the brake pedal but during night time driving, the red tailights are on indicating the bulbs aren't burnt. The third brake light on the top behind the rear seats does illuminate. By the way my tailights aren't the fancy LED ones just the normal stock bulbs. So what's the problem here? Is it a electrical issue?
View 2 RepliesWe had the passenger side brake light not working in our 2002 S60. I moved the little silver tab at the socket w/ a screwdriver and it worked, but then hit the plate and both brake lights went out. Checked fuse, bulbs and swapped relay and shunt w/ out any luck. I hear a click at the relay when we use the brakes-am I missing something? Also, did the same w/ taillights and it blew a fuse, replaced and then they worked.
View 1 RepliesI have yellow tinted fog lights on my Camry, but they weren't a dark enough yellow for me, so I decided to install some yellow Nokya 2500k bulbs as well. They seem to have installed fine, but the driver side bulb shines a lot brighter than the passenger side one:
View 6 RepliesLooking for instructions on how to replace the bulb on the passenger side?
View 5 RepliesPassenger side rear brake light works when lights are off, but does not when lights are on. In looking at both lights while on, the passenger side seems to burn much dimmer than the driver side.
View 4 RepliesMy passenger side headlight bulb stopped working, neither in high or low beam. Does this point to the ballast being the issues? I've never dealt with HIDs before so not really sure of the common problems.
View 2 RepliesHow to replace a front (passenger side) fog light bulb on a 2006? I removed the plastic cover and see several screws. There are no instructions in the manual.
View 1 RepliesI just replaced a burnt out tail/brake lightbulb and found that I had sockets for 5 lights yet only 3 were filled....two were empty. How could this have happened and shouldnt they all be filled? I replaced the blown one but I feel like I should get 2 more per side to make it a full housing. I also am not certain what kind I need . The turn signal bulbs are fine....it's just the tail/brake light bulbs. Why were they not filled? 2002 V6 Passat.
View 7 RepliesI just installed a Tekonsha Envoy trailer brake. I bought the VW wiring pieces and connected it to the factory under-dash plug. The problem is that when this is connected and the trailer is hooked up the green light should illuminate on the Envoy controller. When I have the trailer hooked up, there are no lights lit and the trailer brake unit just seems dead. This is a brand new Envoy.
View 2 RepliesI own a 04 Grand Cherokee and have recently had problems with my passenger side brake light. Now the light itself does work under normal running light conditions, but when I go to press the brake pedal it doesn't engage the bright brake light. Drivers side works fine and so do all my other lights, I replaced the bulb to no avail, and am now currently looking into replacing the bulb socket.
View 1 Replies1995 Lumina LS 3.1L w/ ~185K mi
A few weeks back, the amber ABS light would periodically illuminate and then became more frequent until it was On every time I used the car. The light only comes on after driving the car forward ~10-20ft. Recently in the past few days, the red brake light also started coming on at the exact same time as the amber ABS light. I can start up the car and idle, backup, and then as soon as I drive forward 10-20ft., both lights simultaneously illuminate, along with the sound of something that is engaging/closing/switching etc. coming from the front driver's side, maybe where the brake module is located. The sound coincides with the illumination of the lights. There is also absolutely no noticeable difference in braking.
I just changed the oil a couple days ago and the fluid level was good and appears to have not moved at all since I flushed the lines ~2.5yrs. ago. I cannot recall if I returned the pistons to the home position back then, but either way I was able to bleed all 4 lines.
What may be causing both lights to illuminate together when the car moves forward in addition to coinciding with a sort of clunking/engaging noise coming from the front driver's side?
If I have to replace the EBCM, then do I need a scan tool?
I already called Module Master and they do not rebuild any GM EBCMs built before 1999. Looks like Rock Auto has some though.
I have the exact same problem as described in the below video.
I have worked on brake pads once. I just haven't had the guts to try it on my Hybrid yet.
2004 Prius. When the brakes are applied, the passenger side brake light (LEDs) is dim compared to the driver side. Are the LEDs just dying a slow death? I always thought LEDs either work or don't.
View 3 RepliesThe little green light on my Parking brake button does not illuminate when i push the button to let me know if its on and I am also getting a message on my dash saying Check Parking brake system and have vehicle checked by a dealer. What my problem could be before I take the vehicle to a dealer? Apparently the automatic parking brake is not working at all and the little green light doesnt light up when the button is pressed. I have a 07 ls460 with 112k
View 3 RepliesI have a 10th anniversary Honda Accord. When you apply the emergency brake, the passenger rear wheel brake does not engage. This car appears to have 2 master cylinders, but I could not find any documentation to confirm. Is this correct? The reservoir on the passenger side is way above the max mark. I'm thinking this is somehow related to the e-brake issue.
View 9 RepliesSo, my right, rear, brake caliper froze in the open position a little while back; I hit the brake hard, it held, heard a clack, then it let go and stayed in the open (uncompressed) position. I lost some braking power but at least have been able to drive. No visible brake fluid leak, other three brakes working fine.
At 125K, I've decided to do a full brake job, and am about to search for some of the parts on the awesome stickied parts reference list up above. I'll hopefully find some parts are available at NAPA, where I'm also ordering the right side cv axle.
So, I'm only finding remanufactured brake calipers at NAPA. Are they decent or should I look for something new elsewhere?
2002 Camry 4 cyl was leaking a small bit of oil on the rear passenger side of the valve cover - about directly behind where the timing chain is. I replaced the valve cover today, but noticed that there is still a small amount of oil leaking at the same spot. Is this a common problem with the '02 Camry? Or perhaps I have a valve cover problem?
View 2 Replies