One night i was driving fast and when i let off the gas at about 85 mph my engine started to do a bad tug...(kinda like pushing hard on the brakes just to annoy passengers...) but it wasnt my brakes!!
View 2 RepliesI bought a 2002 camry xle a couple of days ago. The oil light was flickering so I had the oil change yesterday. I drove it around for a little while and everything was fine. The oil light only came on if I had to hit the brakes harder than normal.
So today I decided to take a drive outside of town and everything was fine until I was going up a hill. The car lost power and the engine started to knock. I was able to get it off the road and shut it down really fast. Decided to check the oil and it was hard to tell where it was at on the dip stick. With the dipstick pulled out I notice that there was steam/smoke coming from the dip stick tube.
After I let it cooled down and waiting for a tow truck to come to the rescue, I tried to start it. It ran for a few seconds and then died. During that time I had no power when pressing the gas and it sounded like it was knocking. It was hard to tell the type of noise it was making. Not one did the oil light, check engine light come on until it stop running.
My 2002 Saturn SL1 seems to have a rattling noise when I first start it up. At first I thought it might be the air conditioner compressor, but it continued when I turned the air conditioner off. Now I am wondering if it might be related to my fan motor, for the heater AC. When I turn it off, the rattling noise seems to go away, but not always, especially when first starting the vehicle.
View 1 RepliesWhat happened to my 02 mk4 Jetta after start up and engine failure.
I started the engine, and noticed a high squealing sound just like a loose fan belt, as I backed out my driveway the Battery light came on and engine died, when I tried to re-start the engine it doesn't make any cranking sound just a whirring sound.
So I was driving home from when my engine started to sputter once it hit 4000 rpm and the CEL came on so I figured it was my plugs and coils, I changed all of those and unplugged my battery to get the CEL to go away, now all of a sudden my computer is crazy, I have a lot of indicators and my gears indicators are all highlighted, when I start the car and put in it gear is shifts really hard, I just don't know what to do!
View 4 RepliesMy "99 1.8T Passat has 92K miles. The past few weeks, the check engine light started to come on and I need to refill at least a liter of oil since the dipstick is showing I am low on it. What the problem is? Will it be an expensive fix? The car is still running great...just using up a lot of oil.
View 1 RepliesMy wife was driving this morning and she said that the car engine started to hesitate and shake a lot, engine light came on, started to bling. Called road assistance and they did a great work towing the car in less than half hour. Also noticed a rotten egg smell from the exhaust or engine.
View 7 RepliesJust had the unfortunate scene of seeing the engine light go on but I knew something has been up for a couple weeks just couldn't figure it out but today when I came to a stop my car starts revving slightly without me doing anything and when in park the rpms just increase slightly not alot.
View 6 RepliesI just had my 25k service a month ago. Left car in MSP airport lot for a week and when we were driving home to Duluth last night, the check engine light came on and started flashing and the engine started to stall and run very rough.
Drove slowly to get home, noticed HUGE burning smell under hood, opened it and this part under engine on left side was a glowing fireball red cylinder. 1.8t, have all my maintenance done at dealership. Car ran fine for 126 miles on the way home and it just came on and started flashing
The engine light in my 2001 Passat all of a sudden started blinking when I started it this afternoon - for no apparent reason. It feels like it's going to stall and is idling kind of loud.
View 3 RepliesLets start at the beginning. About two weeks ago my girlfriend got a check engine light and the car started missing( 98 Passat 1.8T, 5 speed). Checked obvious things like fuel delivery-good. Pulled coil packs and had no spark on #2 cyl. Investigated more and found one of the pins on the ign. control module was shorted. Felt pretty sure that was the problem since everything else checked out. Ordered a Huco installed it and that fixed the problem except the car seemed slow reprogramming to the new part. I disconnected the battery to clear the memory and that seemed to do the trick.
About 2 weeks later my GF is coming home and fortunately it died in front of the apartment. Checked everything again. Getting fuel, no wires shorted on ign. or fuel harness plus they all get power just no signal when checking with an LED tester. Ign. module was good also. Checked speed sensor for resistance per the book it was good. Tried a new Camshaft Pos. Sensor hoping that was the problem, no luck. I believe it must be the computer. I'm trying to get one from a salvage yard. I don't know if the old computer can be reprogrammed or not. Also was wondering if the dealer(where I really do not want to go) can test the computer somehow and tell me if it is bad or not(don't know if I would trust them anyway), just wanted to include that option.
So I was driving my 2001 1.8t last night and put the pedal to the floor to make a yellow light and the check engine light began to blink and the engine started running very rough ever since. It idles very rough and it seems like I have lost a lot of the power.
View 7 Replies1)Reverse lights stay on all the time. Tranny is an automatic. The gearshift indicator in the dash works normally. Is it the tranny electrical switch thats bad?
2)Engine just started overheating. I know for a fact the belt to the water pump is loose. Whats the proper way to tighten up that belt? I know how to take the front off the car...just don't know how to tighten the water pump belt. Its the motor that has the separate water pump outside the block, AEB engine.
Traded in my 2006 mustang gt for a 2006 2.0T passat last week. As I was driving the car to work today the check engine light started blinking and the car started to vibrate as if it were about to shut off. The light eventually stayed on, I took it the the dealer and there not sure what the problem is, they say they've never seen this before.
View 15 RepliesMy '98 4.0 has 213k on it and the other day I started the engine and the jeep started shaking like crazy. Eventually the engine quit and refused to turn over so I looked under the hood and quickly discovered the problem, a deteriorated rubber elbow on the left manifold. The elbow connects to a threaded breather type valve in the manifold and has a thin piece of black plastic routing to the purge solenoid next to the left fender/air box.
When I removed the rubber elbow from the manifold the engine eventually turned over and idled fine, I then headed to autozone and found replacements of the same diameter, I cut them down a bit to match the length of the originals. Since its been a while I changed the plugs and wires, coil pack along with cap and rotor while I was at it. I replaced one plug and wire at a time to ensure I didn't mix things up, same goes for the cap. Now the jeep seems to take a few more seconds to get started but once it does it idles fine.
Now when I hit the gas hard the jeep will hesitate and then backfire. If I'm smooth on the gas the jeep drives good, whether city or highway. When coming to a stop the jeep will sometimes buck slightly like it wants to cut but doesn't. The backfire sounds like its coming from the air box and oddly enough, my aftermarket radio no longer plays in the accessory position, probably a separate issue. So far there's been no check engine light.
I really need to keep this jeep for a few more months and I would hate to put big money into at this stage.
My 2002 VW wagon Passat engine lifts when I apply the gas, like the front end of the engine is saying whats up. This happens either idling, or on the street. Brought it in to a mechanic, but it wasn't their specifically. I was told that it was a mount but but every shop I talk to say theyve only got three types but I am thinking there might be more than that. Its obviously one of the front mounts but can I get some clarity as to which one it is, and how intensive this might be?
View 19 RepliesI have 57K miles on my 1.8t. It runs great except for the first start of the day. About half of the time, first thing in the morning it runs rough for the first 30 seconds. Like it is running on 2-3 cylinders. Then it sorts out and runs great the rest of the day. I took it to my dealer where they charged me $200 to replace the spark plugs. I would prefer to fix this myself if I can.
View 2 RepliesPassat 2002 1.9 TDI 74KW strange engine noise
View 1 RepliesCheck engine light came on after a car wash yesterday. I'm sure there is nothing wrong with the car and i recently had an oil change done. i use full synthetic oil too and always get it done on time. Is there a way for me to clear the engine light myself?
View 8 RepliesMy 2000 2.5 V6 TDI Passat has just died.. was doing 60-70 and went to change gear and the engine cut out, tried to restart and its just cranking over and over. Did have a message on the display and the glow plug light on when i was coasting something about management but didn't get the whole message, wasn't on for long.
The recovery guy reckons it might be the crank sensor.
The cambelt should have loads of miles and time left before it goes.
I'd like to sort this myself or at least be sure of what the problem is before i take it anywhere, so what to check for?
There's fuel in the filter and it turns over fine (it could be my paranoia but maybe cranking a little fast)
i just changed a CV joint to fix one problem yesterday, this is the last thing i need!
I had a hard brake from 45mph to 0 last week, now when I start the car or brake hardly, there is beep. What is wrong with it?
View 7 Replies