Passat (B5) :: 2000 4 Motion GLX Slowly Stops When Depress The Pedal
Oct 15, 2007
I just replaced pads and rotors on my 2000 Passat GLX. Everything went fine, i got done, pumped the pedal 10-15 times, took it for a test drive. When I depress the pedal, it goes all the way to the floor, the car pulls right, then left, and slowly stops. At this point, if I hit the brakes again, it feels normal.
I figured it just needed a few minutes, I drove it for about 45 minutes, and it never got any better. I have changed the brakes several times before and never seen anything like this before.
View 6 Replies
Advertisement
Having an issue with my brake pedal. When the car sits for long periods of time, usually overnight, the brake pedal is extremely hard to depress. I have to really press down hard in order to start the ignition. Took it into my dealership, and they actually said there was a TSB issued for something to do with the brakes. Well, evidently, they fixed it, but the issue came back almost immediately, only this time it's worse. The brake pedal firms up after 3-4 hours of sitting.
Brakes feel fine once the ignition is turned on. I was told there's no issue with driving it, but I'm not so sure I trust what I was told.
View 24 Replies
2006 Passat, 6 speed manual,113,000 kms. Driving to work this morning and I noticed every few shifts that the clutch pedal rebounded slowly when released. Then in traffic stuck to the floor and I had to physically pry it back with the side of my foot. Worked fine for a few more shifts then same thing again.
View 4 Replies
First off, I would like to say that I really like how the engine rolls in my 06 Passat 2.0T. Suspension is great and the brake works well...so far. What worries me now is the persistent white noise I get in the cabin when the engine is on, driving or idling, EXCEPT when applying brake.
I took it to the dealer 2 times for this reason. The first time, the rep swore that he could not hear the sound and made a crazy person out of me. The tech wrote in the report that there is no problem. The rep explained that it is the sould of air circulating back (what air?).
So, I took it to an independent mechanic, the one I have been taking my other cars to (Nissan, Infinity, BMW) for the past 5 years or so. He readily heard the sound and identified it as vacuum leak.
I took the car back to the dealer and asked them to check, and it came back to me that the booster performs as per design. It is true that I haven't experienced any loss of brake power yet.
Meanwhile, the sound is getting stronger (and I don't think I am imagining it all, either). Now I have to turn on the radio or CD to muffle the noise.
(Now that my venting and ranting is done...)
Also, if it really is a vacuum leak, does it generate a code? So far, I have not seen any check engine light or check brake light and matchign description appear on the dashboard information console.
View 5 Replies
I've been having a randomly recurring problem with my 2004 Hyundai Elantra for several months now. I'll be driving along and will notice that my brake pedal won't depress. When I step off of the accelerator, it is like the brakes are already engaged. Eventually, the brake pedal won't depress at all and the car acts like the brakes are fully engaged. Sometimes I can let it sit for an hour or several hours and the brakes will readjust and I can move again. So far I have replaced both calipers, rotors, 2 brake hoses and the master cylinder, but I am still having this problem. My mechanic is flummoxed. Any time I have the car towed in, the brakes release by the time it arrives and he has no problem to observe.
View 3 Replies
Ok so I had this creaking noise at first when I press n depress the gas pedal (how normal driving should be) and I sprayed some WD40 and now the noise is gone, but it becomes kind of sticky when pressing and depressing.
It's like when u rub ur finger on a glass window back and forth, there is time when it catches ur finger (sticks) before u can move it the opposite way, it's not smooth as it used to be (my other camrys are smooth).
When pressing a little, then a little more, it has that sticky feel, same thing when depressing the pedal. That's the best I can explain it and it is really noticeable when I'm stuck in traffic.
Do u think I have a bad pedal or some white lithium grease will take care of this?
View 14 Replies
I've got a 2008 Subaru Outback with a 5-speed standard, 50K on it. Lately, when I depress the clutch pedal, it makes a whining noise, in any gear or even in neutral. It goes away when I release the pedal. But it also stops making the noise when the engine warms up. That's the part that confuses me.
View 4 Replies
I can't get the pedal to depress when trying to move from a stop. I was doing fine until this evening when heading back to my hotel following a theater performance. When attempting to accelerate from a stop light . . . NOTHING. I put the car in neutral and stomped on the pedal a few times and it finally engaged. Happened again when trying to merge onto the highway. As long as I keep pressure on the pedal it is fine, but as soon as I release it sticks in the "up" position. Naturally, I'm away from home, the roads are icy, and it's Sunday!
View 4 Replies
I have a 1999 Cadillac Deville. when you start the car, it must warm up and then a signal appears on the dashboard that says to depress brake pedal and shift into gear. HOWEVER, after the message appears and I depress the brake pedal, it still will not shift. Now I have the world's largest paperweight sitting in my driveway, because I cannot even get it to a repair facility. What is wrong, How do I fix it?
View 1 Replies
2001 Ex limited 4x2 w/50k miles-- The parking brake pedal will not depress...at all....not even a millimeter. Feels like it is "locked".
View 2 Replies
So I noticed this has happened a few times.. If I press on the brake pedal too hard, the indicator light will come on and then turn off a few moments after I depress the brake pedal. This has happened when the car is stationary as well as when I was coming to a stop, it's happened maybe 5 times since I picked the car up a few weeks ago. Is this normal behavior or an indication of a problem? Just an FYI, I'm not talking about when the indicators light up when first starting the car.. This is tied strictly to pressing the brake pedal hard.
View 8 Replies
I have an issue that i have been trying to resolve. When i depress the brake lightly to a stop, the pedal pulsates. But if I depress a little harder it pulsates initially midway down and then it stops as i press harder to brake. (I hope this is easy to understand). so... press lightly, pulsates until I reach a stop. press firmly, pulsates briefly, then no pulsation until i reach a stop.
I have pretty much replaced everything. Calipers, rotors, pads, lnes, fluid, hardware. lugs are torqued to 100ftlbs.
Also the caliper is not sticking the problem persists even after I replaced the calipers. I am left at a total loss here. I cant think of anything else. One thing that i noticed is, the LUGS are really hot to the touch after driving it for 15 min or so.
View 8 Replies
2007 Accent pedal won't depress. Bearing making noise for a few months. Is tranny snout toast or is it fixable?
View 2 Replies
This is unusual. After driving into town for new tires, the clutch pedal was hard and I could not depress it after the tire tech parked the truck. It did finally depress with a pop, though the pedal functioned there after the clutch did not function properly.
At times it seemed to be ok at other times it seemed weak. I stopped by Autozone and checked the fluid, seemed low and I added some. Continued home not completely confident that I would make it. Had to make one stop along the way.
Once again the clutch pedal was stuck at the top and would not depress. I finally slid the safety switch up the clutch shaft to start the truck, when the engine started the pedal depressed. I was able to continue home but the clutch is not functioning properly.
View 2 Replies
So - I'm sitting at my VW dealership, hoping that their can figure out why I'm getting a high pitched, miserable squealing sound, every time I depress my brake pedal. It's metallic sounding, and with the history of brake issues I've had in owning other VW models, I just figured it was the brake pads they use. Sounds like their tech believes it is an issue with the tires??? I've got an 04 Phaeton with roughly 38K miles on it - and it's supposedly "certified"....
View 6 Replies
I have a 2003 Mustang. The front brakes are new, and back brakes are OK. When I stop at a stop light, and depress the brake pedal firmly, the car continues to creep forward. I have to put it in neutral or park to get the car to a standstill.
View 10 Replies
New 2013 Elantra owner here.. When initially depressing the brake pedal lightly (before the brake pads engage, usually in stop-and-go traffic), I can feel a rubbing sensation coming from somewhere in the pedal assembly. If it's quiet, I can also hear a groaning sound. This definitely isn't a pad/rotor issue, rather something closer to the pedal itself and inside or near the cabin.
Took it to the dealership and after some coaxing and insistence that it wasn't "normal," they finally said it was the brake switch and replaced it. Seemed to alleviate the problem for a week or so, but now it's back!
View 3 Replies
I have a 2003 Prius that I have had about 4 years. It has under 80,000 miles on it and I have the Ecrostech Scanner which I have had for about 3 years. For the time I have had the Ecrostech I have noticed times when the regenerative braking was not working when I would depress the brake pedal. I understand the regen does not work from about 7 mph and below but my system often does not work even when it is above that speed. I have not been able to force it into regen. It seems to have a mind of its own as in perhaps a faulty ecu.
View 7 Replies
I've got a '12 GTI (bought 10/1/12) with just over 20k miles on it. Everything on the car is stock and original - pads, rotors, calipers - and the brake fluid hasn't been flushed yet. The last few months I've noticed an increasing sponginess to the brakes, the pedal taking longer to depress before I feel significant stopping.
Pads and rotors still look good. Fluid level's normal. At best it feels like maybe some air pockets might've worked into the fluid lines. At worst it feels like maybe a leaky master cylinder. I'm wondering if it's a common problem.
View 1 Replies
For a little wile now, I have had a growling noise when I depress the clutch pedal with the engine running. It mostly does it when the truck is cold and goes away after a few uses but was getting worse and taking longer to go away. The transmission shifts normally, the clutch operates normally and it does not make the noise if I put the transmission in neutral and let the clutch out. So I'm thinking dry throw out bearing.
I did an oil change Monday, and while it was up on the ramps, I decided to check the transmission oil level, I mean its got a 181k on it so its about time to check, right. Bone dry. I put about 2 qts of gear oil in the transmission that the service manual says has a 4 1/4 pint capacity. I took it out for a drive today and the noise is gone. Go figure.
I only drive the truck one or two times a week, sometimes less so in a couple of weeks I will check the transmission again for a leak, but there was no sign of a leak when I was under there Monday. But is still shifts smoothly, makes no noise.
View 3 Replies
Have an 07 gs350 awd and lately the pedal feels stiff and doesn't depress all the way down at startup. Sometimes the steering wheel will go back up as if I have just stopped the car and occasionally I will get the message on the dashboard that I need to press the brake pedal at startup even though I am doing that. Dealership claims they can't duplicate problem and don't know what it could be.
View 3 Replies
